1994 Electrical, Charging and Starting Parts


Showing 1 - 10 of 1344 products
Image
SKU
Product
Rating
Price

Crown Automotive
  • Batter Tray Bolt
  • Battery Tray Bolt; Batter Tray Bolt;
  • Battery Tray Bolt
  • Features:
    • Battery Tray Bolt
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle
1994 - Jeep Wrangler

Crown Automotive
  • Black
  • Battery Tray; Black;
  • Battery Tray
  • Features:
    • Battery Tray
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle
1994 - Jeep Cherokee

Powermaster
  • 168 Tooth Flywheel; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.25:1 Gear Reduction; InfiClock System; Black Wrinkle Finish
  • Mastertorque Starter; 168 Tooth Flywheel; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.25:1 Gear Reduction; InfiClock System; Black Wrinkle Finish;
  • Mastertorque Starter
  • Features:
    • Clears Most Headers and Oil Pans
    • No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
    • Durable Black Wrinkle Finish
    • Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
    • InfiCLOCK Standard On Many Applications
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster Mastertorque Starters Are Rated Up to 14:1 Compression With A 3.25:1 Gear Reduction And Up to 1.8HP Producing 180 Ft-Lbs of Cranking Torque. The Mastertorque Starters Feature A Durable Black Wrinkle Finish. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet K2500 V - 8 Cyl 5.0L 305

Powermaster
  • 168 Tooth Flywheel; 250 ft./lb. Torque; 18:1 Compression Rate; 4.5:1 Gear Reduction; Staggered Mount; Natural Finish
  • Ultra Torque Starter; 168 Tooth Flywheel; 250 ft./lb. Torque; 18:1 Compression Rate; 4.5:1 Gear Reduction; Staggered Mount; Natural Finish;
  • Ultra Torque Starter
  • Features:
    • 2.5 KW/3.4 HP
    • Up to 18:1 Compression
    • Clears Most Headers and Oil Pans
    • Solenoid Up only
    • 3 Position Rotation
    • Great for Big Cubic Inch Engines
    • Supplied With Bolt and Shim Kit
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster Ultra Torque Starter Are Rated Up To 18:1 Compression With 250 Ft-Lbs of Cranking Torque. With 3.4HP and a 4.4:1 Gear Reduction These Starter Can Keep Up With The Most Demanding Engines. 3 Position Rotation Billet Aluminum Mounting Block. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet C2500 Suburban V - 8 Cyl 7.4L 454

Powermaster
  • 168 Tooth Flywheel; 95 ft./lbs. Torque; 10:1 Compression Ratio; Staggered Mounting; Natural Finish
  • Original Look Starter; 168 Tooth Flywheel; 95 ft./lbs. Torque; 10:1 Compression Ratio; Staggered Mounting; Natural Finish;
  • Original Look Starter
  • Features:
    • Big Armature
    • Big Field Coil
    • Hi-Temp Solenoid
    • Stronger Drive
    • Supplied With Bolt and Shim Kit
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster Original Look Hi-Torque starter for OE look with Upgraded Modern Technology and Performance. Same on the Outside- Better on the Inside. Stronger Armature/Field Coil/Drive and Hi-Temp Solenoid. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet C2500 V - 8 Cyl 7.4L 454

Powermaster
  • Standard; 168 Tooth Flywheel; 200 ft./lb. Torque; 18:1 Compression Ratio; 4.4-1 Gear Reduction; Straight Mount
  • XS Torque Starter; Standard; 168 Tooth Flywheel; 200 ft./lb. Torque; 18:1 Compression Ratio; 4.4-1 Gear Reduction; Straight Mount;
  • XS Torque Starter
  • Features:
    • Clears Most Headers and Oil Pans
    • No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
    • Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
    • The Lightest 200ft.lb Starter Available
    • Supplied With Bolt and Shim Kit
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster XS Torque Starters Are Rated Up to 18:1 Compression With A 4.4:1 Gear Reduction And Up to 1.8HP. The XS Torque Is The Lightest 200 Ft-Lbs Of Torque Starter. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet C2500 Suburban V - 8 Cyl 7.4L 454

Powermaster
  • 158/168 Tooth Flywheel; 180 ft./lbs. Torque; 14.1 Compression Rate; Straight Mount; Denso Style
  • Mastertorque Starter; 158/168 Tooth Flywheel; 180 ft./lbs. Torque; 14.1 Compression Rate; Straight Mount; Denso Style;
  • Mastertorque Starter
  • Features:
    • Clears Most Headers and Oil Pans
    • No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
    • Durable Black Wrinkle Finish
    • Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster Mastertorque Starters Are Rated Up to 14:1 Compression With A 3.25:1 Gear Reduction And Up to 1.8HP Producing 180 Ft-Lbs of Cranking Torque. The Mastertorque Starters Feature A Durable Black Wrinkle Finish. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet C3500 V - 8 Cyl 7.4L 454

Powermaster
  • Standard; 153/168 Tooth Flywheel; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.7-1 Gear Reduction; Straight Mount
  • PowerMax Plus Starter; Standard; 153/168 Tooth Flywheel; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.7-1 Gear Reduction; Straight Mount;
  • PowerMax Plus Starter
  • Features:
    • Hitachi Style PP106 Replacement
    • Clears Most Headers and Oil Pans
    • Can Be Inverted w/Solenoid Down
    • 4 Position Rotation
    • Supplied With Bolt and Shim Kit
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster PowerMAX Plus Starter. PP106 Hitachi Style Replacement. 1.4kw/1.9HP Rated up to 14:1 Compression with 170 Ft-Lbs of Cranking Torque and a 3.7:1 Gear Reduction. Billet Aluminum Mounting Block with 4 Position Rotation. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Chevrolet C1500 V - 8 Cyl 5.0L 305

Powermaster
  • Natural Finish
  • Ultra Duty Diesel Starter; Natural Finish;
  • Ultra Duty Diesel Starter
  • Features:
    • Stronger
    • Faster
    • Tougher
    • Durable Black Wrinkle Finish Protects in Harsh Environments
    • Individually Dyno Tested with Proof of Performance Guarantee
  • Powermaster Diesel Ultra Duty Starter. Featuring 3.75:1 Gear Reduction And 3.6HP. These starters are able to turn over the most aggressive diesel engines in the harshest of environments. Durable Black Wrinkle Finish Protects Against Corrosion. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee.

Additional Fitment Information:
Vehicle Block CC Engine CID
1994 - Dodge Ram 3500 L - 6 Cyl 5.9L 359

Crown Automotive
  • w/Solenoid
  • Starter; w/Solenoid;
  • Starter
  • Features:
    • Starter
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1994 - Jeep Wrangler L - 6 Cyl 4.0L SE 242
Showing 1 - 10 of 1344 products

Loading...