Image
Product
Price
- 2" Leveling Kit
- Will fit AT4 models. Will fit gas and diesel equipped models.
- A pair of cast iron torsion bar keys are at the heart of this 2" leveling kit that delivers a leveled stance, comfortable ride and handling and clearance for up to 35" tires. Specially engineered to allow re-use of factory shocks with the supplied upper shock extensions, this kit provides more suspension travel without inducing worry of overextending at full droop.
- In the box: Shock Spacers - Front Torsion Bar Keys
- Product Attributes:
- Lift Type: Leveling Kit
- Welding Required: No
- Front Lift Method: Torsion Key
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Rear Lift Height: -
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 2"
-
Features:
- Nodular cast iron torsion bar keys featured indexed slot to lift/level stance
- Shock extensions to allow use of factory shocks while properly limiting droop travel
- Torsion bar bolt keepers ensure bolt correct engagement and positioning
- Levels stance and allows clearance for 35" tires
- Quick install with easy to follow instructions
- Includes Factory Protection Plus warranty
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - GMC Sierra HD | Denali |
- Adventure Series Upper Control Arm Kit
- Designed for vehicles with OE stamped steel or aluminum control arms, will NOT fit vehicles with OE cast steel arms. Kit includes (2) control arms, driver and passenger side. Tires wider than 285/70r17 cannot be installed on factory wheels due to clearance issues to the steering knuckles.
- Upgrade your truck's factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are designed for 14-18 Chevrolet/GMC 1500 trucks and SUVs with factory stamped steel or aluminum control arms. These arms are built from high strength steel, boxed, gusseted and fully welded for strength and rigidity. At the frame mount they use OE style rubber bushings for a long service free life and quiet operation. At the other end these arms feature an indexed ball joint cup designed for use with leveling and lifted applications. High strength ball joints are used with a protective ball joint cap to keep debris out. These upper control arms come fully assembled and ready to bolt in right out of the box.
- In the box: Control Arms
- Product Attributes:
- For Use With Lift Heights: 0-3"
- Vertical Position: Upper
- Horizontal Position: Front
- Welding Required: No
- Is Adjustable: No
- Cutting Required: No
-
Features:
- Designed for trucks with factory stamped steel or aluminum control arms*
- Improved strength with fully welded plate steel construction
- CNC machined ball joint cup with improved positioning ideal for use with leveling/lift kits
- High quality greaseable ball joints with a protective cap to keep out dirt/debris
- OE style rubber bushings for durability and maintenance-free operation
- Fully assembled and ready to install
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Chevrolet Silverado |
- 6.5" Lift Kit
- Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2017. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum. Crew Cab? Add-A-Leaf: Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference. Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing. Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing. Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2017. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum. Crew Cab? Add-A-Leaf: Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference. Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing. Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing.
- Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires. Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires.
- In the box: All Necessary Mounting / Installation Hardware Crossmembers CV Axle Spacers Differential Drop Brackets Rear Lift Block & U-Bolt Kit Skid Plate Steering Knuckles
-
Features:
- Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
- FMVSS No.126 compliant to work with your vehicle's stability &
- traction control systems without lighting up your dash like a Christmas tree.
- Heavy-duty differential skid slate improves offroad protection.
- High-strength, 1/4" steel construction crossmembers correct lower control arm geometry.
- High-strength, CNC machined, replacement steering knuckles improve strength while correcting steering angles.
- Multi-point differential relocation brackets secure front differential for improved CV operating angles.
- Proudly made in the USA.
- Rear lift block and longer U-bolts for easy installation and level stance.
- Weld-in frame support plate for additional strength.
- Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
- FMVSS No.126 compliant to work with your vehicle's stability &
- traction cont
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2015 - Chevrolet Silverado | 4WD |
- 6.5" Lift Kit with Strut Spacer
- Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2017. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum. Crew Cab? Add-A-Leaf: Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference. Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing. Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing. Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2017. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum. Crew Cab? Add-A-Leaf: Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference. Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing. Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing. Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2017. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum. Crew Cab? Add-A-Leaf: Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference. Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing. Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing.
- Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires. Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires. Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires
- In the box: All Necessary Mounting / Installation Hardware Crossmembers CV Axle Spacers Differential Drop Brackets Rear Lift Block & U-Bolt Kit Skid Plate Steering Knuckles
- Product Attributes:
- Front Lift Method: Strut Spacers
- Cutting Required: No
- Wheel Size: 17 X 9
- Max Tire Size 3: 35 X 12.5
- Back Spacing: 5"
- Front Lift Height: 6.5"
- Max Tire Size 2: 35 X 12.5
- Lift Type: Lift Kit
- Rear Lift Method: Cast Blocks
- Welding Required: Yes
- Wheel Size 2: 18 X 9
- Wheel Size 3: 20 X 9
- Accommodates Factory Wheels: See Notes
- Rear Lift Height: 5"
- Back Spacing 2: 5.25"
- Back Spacing 3: 5.75"
-
Features:
- Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
- FMVSS No.126 compliant to work with your vehicle's stability &
- traction control systems without lighting up your dash like a Christmas tree.
- Heavy-duty differential skid slate improves offroad protection.
- High-strength, 1/4" steel construction crossmembers correct lower control arm geometry.
- High-strength, CNC machined, replacement steering knuckles improve strength while correcting steering angles.
- Multi-point differential relocation brackets secure front differential for improved CV operating angles.
- Proudly made in the USA.
- Rear lift block and longer U-bolts for easy installation and level stance.
- Weld-in frame support plate for additional strength.
- Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
- FMVSS No.126 compliant to work with your vehicle's stability &
- traction cont
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2018 - Chevrolet Silverado | 4WD |
- 3" Adventure Series Lift Kit
- Available for models with and without top mounted rear overload springs - be sure to select correct kit below for your application. Minor trimming may be required, especially if a wheel backspace of less the specified is used. Optional steering stabilizer (PN# 7103) only fits vehicles that came equipped with a steering stabilizer from the factory. Requires 1/4" wheel spacer to accommodate stock 20" rims.
- Take your Chevy/GMC HD to new heights with this 3" adventure series lift kit from Zone Offroad. Kits include everything needed from high strength upper control arms and indexed torsion bar keys to differential relocation spacers and a rear lift block kit to complete the install. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires.
- In the box: All Necessary Mounting / Installation Hardware Differential Drop Brackets Rear Lift Blocks Torsion Bar Keys U-Bolts Upper Control Arms
- Product Attributes:
- Front Lift Method: Torsion Key
- Cutting Required: No
- Wheel Size: 17 X 9
- Max Tire Size 3: 35 X 12.5
- Back Spacing: 5.5"
- Front Lift Height: 3"
- Max Tire Size 2: 35 X 12.5
- Lift Type: Lift Kit
- Rear Lift Method: Cast Blocks
- Welding Required: No
- Wheel Size 2: 18 X 9
- Wheel Size 3: 20 X 9
- Accommodates Factory Wheels: See Notes
- Rear Lift Height: 2"
- Back Spacing 2: 6"
- Back Spacing 3: 6"
-
Features:
- Adventure series fully boxed HD upper control arms for improved strength and suspension travel
- Improved ride quality and suspension travel over standard "leveling kits"
- Front differential drop included to correct CV shaft angles
- Rear 2" rear block kit will net a level to slightly tail high stance
- Indexed torsion bar keys to set ride height
- Allows clearance for up to 35" tires
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2013 - GMC Sierra HD | 4WD |
- 3" Adventure Series Lift Kit
- Stock wheels with stock tires can be installed, however clearance are very tight to the upper control arms. Proper torsion bar key unloading tool required, (Kent Moore #CH48809 or equivalent) Will work on gas or diesel models. Will work on standard and AT4 models. Not recommended for DRW applications (may require custom u-bolts) Stock wheels with stock tires can be installed, however clearance are very tight to the upper control arms. Proper torsion bar key unloading tool required, (Kent Moore #CH48809 or equivalent) Will work on gas or diesel models. Will work on standard and AT4 models. Not recommended for DRW applications (may require custom u-bolts)
- Take your new HD to the next level with the 3" Adventure Series Lift Kit from Zone Offroad. Engineered for easy bolt on fitment and improved travel, these 3? Adventure Series Lift Kits bridge that gap between an entry level leveling kit and full IFS lift system offering next level performance without the cost and extensive installation. The heart of this new system is a pair of heavy duty replacement upper control arms (UCAs) designed to improve range of motion for more suspension travel when wheeling in rough terrain. These new control arms dwarf the factory units and are built from high strnegth steel, boxed and fully welded with CNC-machined bushing and ball joint cups repositioned to operate in the neutral position at 3? of lift. They use OE durometer rubber bushings and greaseable OE-style heavy duty ball joints for quiet, reliable operation and superior corrosion resistance to uniball style control arms. Along with the arms, a pair of reindexed cast steel torsion bar keys are sup
- In the box: Rear Lift Block & U-Bolt Kit Torsion Bar Keys Upper Control Arms Sway Bar Relocation Differential Relocation
- Product Attributes:
- Front Lift Method: Torsion Key
- Wheel Size: 20 X 9
- Max Tire Size 3: 285 X 65
- Back Spacing: 5-5.75"
- Front Lift Height: 3"
- Max Tire Size 2: 295 / 60
- Lift Type: Lift Kit
- Rear Lift Method: Fabricated Blocks
- Wheel Size 2: 20 X 9
- Wheel Size 3: 20 X 9
- Rear Lift Height: 2"
- Back Spacing 2: 5-6.18"
- Back Spacing 3: 5-6.18"
-
Features:
- High strength UCAs are boxed and fully welded. They are specially designed with an indexed ball joint cup to correct ball joint operating angle for more suspension travel.
- Cast construction indexed torsion bar keys to provide additional ride height while maximizing ground clearance.
- Front differential relocation brackets to correct CV axle operating angle.
- Sway bar relocation brackets to maintain clearance and proper operating angle.
- 2" rear lift blocks and heavy duty u-bolts to level the stance.
- Nitro series gas or FOX 2.0 adventure series IFP gas shocks to improve performance.
- Maintains ride and handling characteristics with clearance for 35" tires.
- Allows for improve offroad performance with more droop travel.
- High strength UCAs are boxed and fully welded. They are specially designed with an indexed ball joint cup to correct ball joint operating angle for more suspension travel.
- Cast construction indexed torsion bar keys to provide additional ride height whil
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Chevrolet Silverado HD |
' ; } } } cfdump_toggleRow = function(source) { //target is the right cell if(document.all) target = source.parentElement.cells[1]; else { var element = null; var vLen = source.parentNode.childNodes.length; for(var i=vLen-1;i>0;i--){ if(source.parentNode.childNodes[i].nodeType == 1){ element = source.parentNode.childNodes[i]; break; } } if(element == null) target = source.parentNode.lastChild; else target = element; } //target = source.parentNode.lastChild ; cfdump_toggleTarget( target, cfdump_toggleSource( source ) ) ; } cfdump_toggleXmlDoc = function(source) { var caption = source.innerHTML.split( ' [' ) ; // toggle source (header) if ( source.style.fontStyle == 'italic' ) { // closed -> short source.style.fontStyle = 'normal' ; source.innerHTML = caption[0] + ' [short version]' ; source.title = 'click to maximize' ; switchLongToState = 'closed' ; switchShortToState = 'open' ; } else if ( source.innerHTML.indexOf('[short version]') != -1 ) { // short -> full source.innerHTML = caption[0] + ' [long version]' ; source.title = 'click to collapse' ; switchLongToState = 'open' ; switchShortToState = 'closed' ; } else { // full -> closed source.style.fontStyle = 'italic' ; source.title = 'click to expand' ; source.innerHTML = caption[0] ; switchLongToState = 'closed' ; switchShortToState = 'closed' ; } // Toggle the target (everething below the header row). // First two rows are XMLComment and XMLRoot - they are part // of the long dump, the rest are direct children - part of the // short dump if(document.all) { var table = source.parentElement.parentElement ; for ( var i = 1; i < table.rows.length; i++ ) { target = table.rows[i] ; if ( i < 3 ) cfdump_toggleTarget( target, switchLongToState ) ; else cfdump_toggleTarget( target, switchShortToState ) ; } } else { var table = source.parentNode.parentNode ; var row = 1; for ( var i = 1; i < table.childNodes.length; i++ ) { target = table.childNodes[i] ; if( target.style ) { if ( row < 3 ) { cfdump_toggleTarget( target, switchLongToState ) ; } else { cfdump_toggleTarget( target, switchShortToState ) ; } row++; } } } } cfdump_toggleTable = function(source) { var switchToState = cfdump_toggleSource( source ) ; if(document.all) { var table = source.parentElement.parentElement ; for ( var i = 1; i < table.rows.length; i++ ) { target = table.rows[i] ; cfdump_toggleTarget( target, switchToState ) ; } } else { var table = source.parentNode.parentNode ; for ( var i = 1; i < table.childNodes.length; i++ ) { target = table.childNodes[i] ; if(target.style) { cfdump_toggleTarget( target, switchToState ) ; } } } } cfdump_toggleSource = function( source ) { if ( source.style.fontStyle == 'italic' || source.style.fontStyle == null) { source.style.fontStyle = 'normal' ; source.title = 'click to collapse' ; return 'open' ; } else { source.style.fontStyle = 'italic' ; source.title = 'click to expand' ; return 'closed' ; } } cfdump_toggleTarget = function( target, switchToState ) { if ( switchToState == 'open' ) target.style.display = '' ; else target.style.display = 'none' ; } // collapse all td elements for queries cfdump_toggleRow_qry = function(source) { expand = (source.title == "click to collapse") ? "closed" : "open"; if(document.all) { var nbrChildren = source.parentElement.cells.length; if(nbrChildren > 1){ for(i=nbrChildren-1;i>0;i--){ target = source.parentElement.cells[i]; cfdump_toggleTarget( target,expand ) ; cfdump_toggleSource_qry(source); } } else { //target is the right cell target = source.parentElement.cells[1]; cfdump_toggleTarget( target, cfdump_toggleSource( source ) ) ; } } else{ var target = null; var vLen = source.parentNode.childNodes.length; for(var i=vLen-1;i>1;i--){ if(source.parentNode.childNodes[i].nodeType == 1){ target = source.parentNode.childNodes[i]; cfdump_toggleTarget( target,expand ); cfdump_toggleSource_qry(source); } } if(target == null){ //target is the last cell target = source.parentNode.lastChild; cfdump_toggleTarget( target, cfdump_toggleSource( source ) ) ; } } } cfdump_toggleSource_qry = function(source) { if(expand == "closed"){ source.title = "click to expand"; source.style.fontStyle = "italic"; } else{ source.title = "click to collapse"; source.style.fontStyle = "normal"; } }
| struct | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| applications |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| applications_header |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| applications_header_display |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| assets |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| brand |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| category |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| image |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| make |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| model |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| packing_volumetric |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| part_name |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| price |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| pricing_levels |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| product |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| source |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| subcategory |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| vehicle_qualifier |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| vendor_sku |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| year |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| struct | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Detail | [empty string] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ErrNumber | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Message | The value model_description cannot be converted to a number. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| StackTrace | coldfusion.runtime.Cast$NumberConversionException: The value model_description cannot be converted to a number. at coldfusion.runtime.Cast._double(Cast.java:1009) at coldfusion.runtime.Cast._double(Cast.java:856) at coldfusion.runtime.Cast._double(Cast.java:1163) at coldfusion.runtime.Cast._int(Cast.java:627) at coldfusion.runtime.Cast._int(Cast.java:632) at coldfusion.runtime.CfJspPage.ArrayGetAt(CfJspPage.java:1566) at coldfusion.runtime.CfJspPage._arrayGetAt(CfJspPage.java:1901) at coldfusion.runtime.CfJspPage._arrayGetAt(CfJspPage.java:1853) at coldfusion.runtime.CfJspPage._arrayGetAt(CfJspPage.java:1139) at coldfusion.runtime.CfJspPage._arrayGetAt(CfJspPage.java:1112) at coldfusion.runtime.CfJspPage._arrayGetAt(CfJspPage.java:1077) at coldfusion.runtime.CfJspPage._arrayGetAt(CfJspPage.java:1064) at cffunctions2ecfc213836073$funcBUILDPRODUCTTITLELINK.runFunction(D:\InetPub\wwwroot\PSAPWUSA\class\functions.cfc:828) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:623) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:516) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:463) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:438) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:310) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:975) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:696) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:503) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:4264) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:4227) at cfApplication2ecfm1616915835$funcBUILDPRODUCTTITLELINK.runFunction(D:\InetPub\wwwroot\PSAPWUSA\Application.cfm:191) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:623) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:516) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:463) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:438) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:310) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:5021) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:5001) at cfpart2dlist2ecfm1186515139._factor29(D:\InetPub\wwwroot\PSAPWUSA\part-list.cfm:1093) at cfpart2dlist2ecfm1186515139._factor36(D:\InetPub\wwwroot\PSAPWUSA\part-list.cfm:997) at cfpart2dlist2ecfm1186515139._factor37(D:\InetPub\wwwroot\PSAPWUSA\part-list.cfm:995) at cfpart2dlist2ecfm1186515139._factor48(D:\InetPub\wwwroot\PSAPWUSA\part-list.cfm:994) at cfpart2dlist2ecfm1186515139._factor51(D:\InetPub\wwwroot\PSAPWUSA\part-list.cfm:269) at cfpart2dlist2ecfm1186515139._factor52(D:\InetPub\wwwroot\PSAPWUSA\part-list.cfm:163) at cfpart2dlist2ecfm1186515139.runPage(D:\InetPub\wwwroot\PSAPWUSA\part-list.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:257) at coldfusion.tagext.lang.IncludeTag.handlePageInvoke(IncludeTag.java:749) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:578) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:613) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:43) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:162) at coldfusion.filter.IpFilter.invoke(IpFilter.java:45) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:97) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:81) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:60) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:231) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:311) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:209) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:153) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:46) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:47) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:178) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:153) at org.apache.tomcat.websocket.server.WsFilter.doFilter(WsFilter.java:51) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:178) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:153) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:168) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:90) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:481) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:130) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:93) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:74) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:355) at org.apache.coyote.ajp.AjpProcessor.service(AjpProcessor.java:450) at org.apache.coyote.AbstractProcessorLight.process(AbstractProcessorLight.java:63) at org.apache.coyote.AbstractProtocol$ConnectionHandler.process(AbstractProtocol.java:928) at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.doRun(NioEndpoint.java:1794) at org.apache.tomcat.util.net.SocketProcessorBase.run(SocketProcessorBase.java:52) at org.apache.tomcat.util.threads.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1191) at org.apache.tomcat.util.threads.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:659) at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61) at java.base/java.lang.Thread.run(Thread.java:834) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Suppressed |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TagContext |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type | Expression | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| source | model_description | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||