Kolbenschmidt Parts


Showing 1 - 10 of 296 products
Image
SKU
Product
Rating
Price

Kolbenschmidt
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Eng: 1817653-, 6mm
  • Schoetle Germany

Additional Fitment Information:
Vehicle Engine Range
2000 - Volvo C70 1817653 and up

Kolbenschmidt
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Schoetle Germany

Additional Fitment Information:
Vehicle
2006 - Volvo S40

Kolbenschmidt
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Eng: 1818169-, For vehicles with 6mm Diameter Valve Stems
  • Schoetle Germany

Additional Fitment Information:
Vehicle Engine Range
2001 - Volvo S40 1818169 and up

Kolbenschmidt
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Eng: 1817725-, 6mm
  • Schoetle Germany

Additional Fitment Information:
Vehicle Engine Range Aspiration
2000 - Volvo S70 1817725 and up Naturally Aspirated

Kolbenschmidt
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Eng: 1818169-, 6mm
  • Schoetle Germany

Additional Fitment Information:
Vehicle Block CC Engine Range Engine CID
2000 - Volvo S80 L 2798 1818169 and up 6 Cyl 2.8L -

Kolbenschmidt
  • When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
  • Lash Adjuster

Additional Fitment Information:
Vehicle
1993 - Ford Probe

Kolbenschmidt
  • When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
  • Lash Adjuster

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Mazda Millenia V 2497 Exhaust 6 Cyl 2.5L -

Kolbenschmidt
  • Production: 01/02/1995-
  • When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is also ideal if the engine is allowed to rest over night before starting the engine for the first time. If possible, the engine should be hand cranked or turned by hand the first time.
  • Lash Adjuster

Additional Fitment Information:
Vehicle Block CC Position Engine CID Prod. Date Range
1995 - Mazda Millenia V 2497 Intake 6 Cyl 2.5L - Fr:01-02-95

Kolbenschmidt
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle
2007 - Mercedes-Benz SL550

Kolbenschmidt
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle
1996 - Volkswagen Cabrio
Showing 1 - 10 of 296 products

Loading...