Kia Parts


Showing 1 - 10 of 26529 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Engine CID
2008 - Kia Rio L 1599 4 Cyl 1.6L -

Magnaflow
  • Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.50in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Gasket Included: No
    • Outlet Gasket Included: Yes
    • Inlet Diameter: 2.5
    • MFWeb: Yes
    • Heat Shield Attached: Yes
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Oval
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Outlet Diameter: 2.5

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2005 - Kia Sorento V 3497 Rear 6 Cyl 3.5L -

Magnaflow
  • Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2

Additional Fitment Information:
Vehicle Block CC Engine CID
1995 - Kia Sephia L 1839 4 Cyl 1.8L -

Husky Liners
  • 2nd Or 3rd Seat Floor Mats
  • Black; 2 pc.; Does Not Cover Hump May Require Trimming For Correct Fit/Trim Guides Molded In Mat
  • HD 2ND OR 3RD SEAT FLOOR MATS
  • Heavy Duty Floor Mat
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position Sub Model
2005 - Kia Rio Rear Cinco

Husky Liners
  • 2nd Or 3rd Seat Floor Mats
  • Black; 2 pc.; Does Not Cover Hump
  • HD 2ND OR 3RD SEAT FLOOR MATS
  • Heavy Duty Floor Mat
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position
1998 - Kia Sportage Rear

Husky Liners
  • 2nd Or 3rd Seat Floor Mats
  • Black; 2 pc.; Does Not Cover Hump 3rd Seat Floor Mat~May Require Trimming For Correct Fit/Trim Guides Molded In Mat
  • HD 2ND OR 3RD SEAT FLOOR MATS
  • Heavy Duty Floor Mat
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position
2003 - Kia Sedona Rear

CURT
  • Class 3 Trailer Hitch; 2in. Receiver; Select Hyundai Santa Fe; Kia Sorento
  • 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Round Main Body~No Drilling Required~Visibility: Concealed~Fascia Trimming Required~Install Time 15 Minutes
  • CURT 13073 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Hyundai Santa Fe; Kia Sorento
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 3500 Lbs.
    • Visibility: Concealed
    • Weight Carrying Capacity: 3500
    • Body Shape: Round
    • WARNING CA Proposition 65: No
    • Drilling Required: No
    • Install Time: 15 Minutes
    • WC Tongue Weight: 350
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Constructed w/A Sleek Round-Tube Main Body
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Santa Fe and Kia Sorento (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2012 - Kia Sorento V 3470 Rear 6 Cyl 3.5L -

Westin
  • Black Steel; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately; 10.75 in. Mounting Depth
  • Safari Bull Bar; Black Steel; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately; 10.75 in. Mounting Depth;
  • Safari Bull Bar
  • Product Attributes:
    • Design: One Piece
    • WARNING CA Proposition 65: Yes
    • Construction: Stainless Steel
    • WARNING CA Proposition 65 Message: Cancer And Birth Defect
  • Features:
    • 2 in. Diameter Bar
    • Welded Light Mounting Tabs
    • Universal Bars
    • No Drill Installation
    • 5 Year Warranty
  • The Safari Light Bar transforms the look of compact mid-size trucks and SUVs giving them rugged but not overpowering countenance. Made in mild steel with black powder coat finish.

Additional Fitment Information:
Vehicle Position
2004 - Kia Sorento Front

CURT
  • Class 3 Hitch; 2in.; Select Hyundai Tucson; Kia Sportage (Exposed Main Body)
  • 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 15 Minutes
  • CURT 13066 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Hyundai Tucson; Kia Sportage
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 3500 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 3500
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • Drilling Required: No
    • Install Time: 15 Minutes
    • WC Tongue Weight: 350
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Tucson and Kia Sportage (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2012 - Kia Sportage L 2359 Rear 4 Cyl 2.4L LX -

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.25
    • Overall Length: 15
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Air Tube Adaptable: No
    • Body Length: 11
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Engine CID
2007 - Kia Rondo L 2359 4 Cyl 2.4L -
Showing 1 - 10 of 26529 products

Loading...