1975 Ford Ranchero Mechanical Fuel Pump 8 Cyl 7.5L Holley

★★★★☆ 4.4/5 8 ratings
  • Features:
  • High Output Fuel Flow
  • Flows 110 gph Free Flow
  • Shutoff Pressure Pre-Set From 6.5 To 8 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
Free Flow GPH 110; Gasoline; 3/8 in. NPT Inlet/Outlet; Silver
Not Legal For Sale Or Use In California On Any Pollution Controlled
Mechanical Fuel Pump; Free Flow GPH 110; Gasoline; 3/8 in. NPT Inlet/Outlet; Silver;
Mechanical Fuel Pump
26 In Stock
Best Price:
$233.20 USD $279.84 USD
BrandHolley
Part #H1912-460-11
ConditionNew
WarehouseB
Ranchero Holley Mechanical Fuel Pump 1975 Ford
Additional Fitment Information:
Vehicle Engine CC CID Block Type
1975 Ford Ranchero 8 Cyl 7.5L - 460 V
  • Free Flow GPH 110; Gasoline; 3/8 in. NPT Inlet/Outlet; Silver
    Not Legal For Sale Or Use In California On Any Pollution Controlled
  • Mechanical Fuel Pump; Free Flow GPH 110; Gasoline; 3/8 in. NPT Inlet/Outlet; Silver;
  • Mechanical Fuel Pump

General

Free Flow GPH
110
Fuel Type
Gasoline
Fully Open
416
WARNING CA Proposition 65
Yes
Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
  1. Capedbandit
    11 Apr, 2015
    Looked good. Came with gasket and a sticker, but no instructions. Also, did not fit my '55 Chevy with 327, so I cannot comment on its performance.
  2. Nancy M Jones
    29 Oct, 2014
    just what we needed
  3. Rzrman "Dr. Hogan"
    20 Oct, 2014
    Good quality!
  4. Patrick Taylor
    23 Sep, 2014
    Great pump looks great and performs great, I only wish they would include everything to use it right out of the box, not have to buy fittings extra.
  5. Ak70stang
    17 Aug, 2014
    Nice fuel pump on my 347 stroker.
  6. Dh
    05 Aug, 2014
    Well made. Fit and finish is great. The angles of the in and out were not a good match for my car. Even with moving the bottom to a close spot it required a harsh bend. So I used a 90 and a locally built steel braided flex with ptfe inner coating section. Other than that, advertised psi is spot on. Would by another in a heartbeat.
  7. James M Barker
    03 Aug, 2013
    My boat runs great, this solved a problem of hard starting and poor running I fought for over a year that my mechanic attributed to carb problems. The only issue I had was that the fittings did not line up with the old one. I could line up the outlet fitting, but the inlet was off and I had to bend new fuel line to fit. The pressure I measured from this pump is about 8 psi.
  8. Chris Crossont
    24 Feb, 2012
    If you have an engine that is making less than 500HP, and you prefer a mechanical pump, then this will work well for you. I recommend at least a 3/8" fuel line from the tank to the pump for best efficiency.

Loading...