0
1975 Chrysler Cordoba
The Smart WAY to Buy Auto Parts Online!
About us
Feedback
Retrieve Quote
Phone: (800) 594-0237 CA
Log In My Account
0 Shopping Cart $0.00
May Promo 1975 Chrysler Cordoba Carburetor 8 Cyl 5.9L Holley

1975 Chrysler Cordoba Carburetor 8 Cyl 5.9L Holley

★★★★☆ 4.9/5 22 ratings
  • Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
4 bbl; 670 cfm; Model 4150; Vacuum Secondary; Electric Choke; Gasoline; Dual Fuel Inlet; 1.563 in. Throttle Bore; Shiny Zinc Finish
1 Timed Spark Vacuum Port; 2 Full/1 PCV Vacuum Port~Straight Booster
Street Avenger Carburetor; 4 bbl; 670 cfm; Model 4150; Vacuum Secondary; Electric Choke; Gasoline; Dual Fuel Inlet; 1.563 in. Throttle Bore; Shiny Zinc Finish;
Street Avenger Carburetor
4 In Stock
Best Price:
$785.27 USD $942.32 USD
BrandHolley
Part #H190-80670
ConditionNew
WarehouseB
Cordoba Holley Carburetor 1975 Chrysler
Why shop at AutoPartsWAY?
Fast Warehouse ShippingFast shipping from our warehouse network. Free ShippingOn orders over $100 USD shipped from the same warehouse. Full WarrantyWarranty details for this brand and warehouse source. Order 24/7Order anytime — our system works 24/7 to get your parts moving fast. 100% Safety & Security- Enjoy 100% safe, secure ordering every time you shop.
Additional Fitment Information:
Vehicle Engine CC CID Block Type
1975 Chrysler Cordoba 8 Cyl 5.9L - 360 V
Description Specifications Reviews (22)
  • 4 bbl; 670 cfm; Model 4150; Vacuum Secondary; Electric Choke; Gasoline; Dual Fuel Inlet; 1.563 in. Throttle Bore; Shiny Zinc Finish
    1 Timed Spark Vacuum Port; 2 Full/1 PCV Vacuum Port~Straight Booster
  • Street Avenger Carburetor; 4 bbl; 670 cfm; Model 4150; Vacuum Secondary; Electric Choke; Gasoline; Dual Fuel Inlet; 1.563 in. Throttle Bore; Shiny Zinc Finish;
  • Street Avenger Carburetor

General

Barrel
Four
Booster Type
Straight
Carburetor Type
4150
CFM
670
Choke
Electric
Emission
Without Egr
Flange
Square Bore
Fuel Inlet
Dual
Fuel Type
Gasoline
Primary Main Jet
65
Primary Power Valve
6.5
Secondary Main Jet
72
Secondary Type
Vacuum
Supercharged Application
No
Throttle Bore
1.563 In.
Usage
Street/hi-performance
Vacuum Port Quantity
1 Timed (spark); 2 Full; 1 Pcv
WARNING CA Proposition 65
Yes
Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
  1. TY
    30 Dec, 2014
    A
  2. plinkerman
    25 Nov, 2014
    First time ever that I got a plug and play carb that really worked that way. Hook it up and it worked the first time and didn't have to do anything but adjust the idle just a little bit. Been running good every since. This was a change over from a Rochester 2 barrow to this holley 2300 350cfm and it did require an adapter plate and was a real improvement for my 225 cu in dodge slant six. Added a manual choke kit but so far has started up without it even in cold weather, just a couple of pumps on the throttle and it cranks right over and starts, stays running until warmed up. I love this setup!
  3. Mike
    29 Aug, 2014
    Friend has this carb and told me about about it for my 79 ford f250 4x4 with a 460. Bolted it on and works great. Engine breathes much better. More performance (dropped my gas mileage though) all in all a great buy.
  4. Rodney Witt
    15 Aug, 2014
    Awesome carbutator!
  5. hector salazar
    20 Jul, 2014
    Excellent carburetor, I installed it on my 2005 Larson Senza 203 boat, I am very impressed on how well it runs now, it idles very well, and it has a lot more power, the boat performs as well as it did when it was brand new.
  6. Pilar Enneper "Pilar L Enneper"
    07 Jun, 2014
    Works well .
  7. Roger Erickson
    08 Mar, 2014
    I owned one like it before on my high performance big truck with a 5.0 V-8 in a Ford Ranger pickup with bored out racing engine. Forged pistons, high lift cam. My top speed 105+ mph, and 11 secs. in a 1/4 mile. need I say more.
  8. Tim
    05 Feb, 2014
    If you are running a carburetor then look no further than Holley!Over the years I have used many different brands but Holley delivers everything I need in performance hands down!unless you are going to fuel injection the truck avenger is worth every penny.
  9. OGZ
    02 Jan, 2014
    Fantastic plug and play carb for the International 345 in my 78 Scout. Only two vacuum lines needed...no emissions testing where I live so I was able to remove all smog controls and greatly simplify the routing. My stock throttle and kickdown cable assembly bolted right up, no adjustments needed. Added Holley electronic choke kit and Holley gasket 108-52, both highly recommended for easy startups and to protect the carb from heat far better than the stock gasket.Night and day difference between the stock Holley 2210 and this 7448! It feels like a completely different truck. Very well worth the money.
  10. Stuart Trent Shepherd
    24 Oct, 2013
    Awesome purchase. Put on and no adjusting and great performance. Just what the dr ordered. Would order from them all over again.
  11. Scott
    28 Aug, 2013
    Works great on my 454 engine in my 21' Ultra Boat. I highly recommend this product, has not let me down.
  12. nicholas a. ours
    20 Aug, 2013
    very nice carb, lots of cool features for simple tuning, would have given 5stars but bowls were not as shiny as I would have liked. but great product, looks good on my tunnelram
  13. SB
    09 Jun, 2013
    Unboxed it, installed it, and my car runs great.I was upgrading from a 600cfm holley unit and didn't expect that I would need to buy the $50 fuel rail.This unit has two fuel inlet ports, you will need to split off your fuel lines somehow to get to both of them. The holley rail looks nice and has a provision for a fuel gauge, but I noticed there are cheaper off-brand alternatives.
  14. S. Maldonado "smal86"
    02 May, 2013
    The Husband bought this carb to put in his truck and he has had a great time working on both the truck and the carb. It works great according to The Husband.
  15. aakhunter
    30 Mar, 2013
    JJust right for my application bolt on and go only a little adjusting done. Packaged very well and good warranty information.
  16. Jess Galiher
    21 Dec, 2012
    Bought this for my 68 327 chevy. Used a weiand street warrior manifold. Great carb for a dual plane manifold. Super smooth, very happy with the Holley.
  17. Jeff Speicher
    17 Dec, 2012
    looks good mounted on any muscle car engine good street and strip application runs good right out of the box.
  18. jordan
    15 Aug, 2011
    i had a 600 edelbrock Performer 600 on my 355 and it just didnt have the get up that i wanted .this carb changed everything performance, style, and setup. i love this carb easy to put on too. i would recommend this carb to anyone.
  19. Mike M
    11 Jul, 2011
    1970 K5 Blazer 307CI. The 450 Truck Avenger worked a lot better than 650 Spread Bores or 600 Edebrock. I think the key is most of the time is spent at low RPMs, and the smaller carb really improves starting and low RRM response and torque.
  20. Uranus Speaks "Uranus"
    23 Sep, 2010
    Nothing much to say if you're familiar with Holley carburators. The one I purchased expectedly lives up to their long-time great reputation. This specific Holley has mechanical secondaries, and as such I immediately noticed substantially improved throttle response Vs. the Vacuum secondary model the new Holley replaced.Secondly, AutoPartsWAY surprisingly provided this carburator at a savings of around $40 over several other sellers ($30 less cost and free shipping).Considering it's a Holley and receiving it at a cost around 10 percent less than the best popular sellers, that's a great deal.
  21. Edward Thomas
    05 Sep, 2009
    I bought this to replace the carb on my 1960 International Harvester B110 truck. The old one on the 266 v8 had a broken throttle plate and needed a rebuild in the worst way so I figured I should just buy a new one. Puting it on was pretty easy; the only issue there was is that the fuel line and choke cable inpute are on the other side compaired to the older 2300 models. As for tuning, the idle mixture seemed to be spot on, the only thing I adjusted was the float level, it was a bit low. The carb runns great, I expected it to be way too rich for for my 266 but it turned out to be perfect at 44ft above sea level. If you have heat issues, you may want to swing by Napa and buy a thicker mounting gasket with a bowl heat sheild as the one that comes in the box is paper thin.
  22. Andy R. Barela "ARB"
    13 Dec, 2007
    Received 1st carb. and it was nothing but trouble, it was bogging when accelerated and would idle very hi and could not be adjusted. Since it was under warranty I sent it back and received the other one a few days later. It was also sticking on hi idle, but it would run great on the road so I decided to keep it and fixed problem by filing down linkage on auto choke side of carb. Carb now runs great and has not given me any problems since. Thanks AutoPartsWAY for the quick and easy return on first product.

Loading...