Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Acura RDX |
- FRAM, TG7317, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Gasket Inside Diameter: 4.130
- Non Slip Grip: Yes
- Gasket Thickness: 0.125
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 350.000
- Gasket Material: O-ring (1) O-ring 1
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 2.688
- Gasket Outside Diameter: 4.375
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Tough Guard® Oil Filters with SureGrip® deliver premium high mileage engine protection for today's passenger cars and light duty trucks. Tough Guard provides premium engine protection for drivers in stop-and-go traffic and the durability to withstand tougher driving conditions and towing. Top quality engineering makes it an ideal pairing for any oil type. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
230962, D52932, L688, PF1089
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Acura TLX | V | 3471 | 6 Cyl 3.5L | - |
- FRAM, XG7317, Oil Filter
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 3.000
- Torque Nut: No
- Burst Pressure: 350.000
- Replaceable Filter: No
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 2.688
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
46986, 6986BP, B23142M, BE-478, CB33, CF105
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Acura MDX | V | 3471 | 6 Cyl 3.5L | - |
- FRAM, PH7317, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Non Slip Grip: Yes
- Micron Rating: 8.000
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 350.000
- Housing Color: White
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15'
- Marine Approved: No
- Outside Diameter: 2.688
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
1661964, 20514654, BF1366-O, BW5183, FP531, FS19735, H700WK, R260P
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Acura TLX | V | 3471 | 6 Cyl 3.5L | - |
- Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm
- 16 mm Head Package Quantity: 5 Dorman - AutoGrade - Boxed Packaging Type: Box Thread Pitch: 1.5 mm
- Product Attributes:
- Thread Size: M14-1.50
- Threads Per Inch: 0
- SAE or Metric: Metric
- Package Contents: 5 Oil Drain Plugs
- Head Size (SAE/Metric): 16 Mm
- Length: 0.857
- Magnetic: No
- Thread Type: Fine
- Oversized Thread: No
- Bolt Grade: 5.8
- Special Tool Required: No
- Gasket Type: Gasket
- Socket Points: 6
- Head Drive Type: Hex
- Describe Type: Pilot Point
- Program: Universal Oil
- Drain Method: Conventional
-
Features:
- Ideal replacement - this engine oil drain plug matches the fit and function of the original drain plug
- Durable construction - this replacement drain plug is made of corrosion-resistant materials for reliable service
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on testing to ensure a quality seal
- This replacement engine oil drain plug is a direct replacement for a damaged or worn original equipment drain plug, precisely matching the thread pitch to ensure a quality seal.
This Part Fits the Following OEM/Substitute Numbers:
0924714027, 0B6S710404A, 1013938, 1027, 113115193, 1151785Z00, 1151786Z00, 1151786Z02, 11569943, 12582347, 17613pk, 2151221000, 2151221010, 2151223000, 2151223001, 215122X000, 263-917, 323276...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Acura RDX | V | 3471 | 6 Cyl 3.5L | - |
- Interference engine application
- PowerGrip Premium OE Timing Belt
- Product Attributes:
- Top Width:
- .787
- 20
- Belt Material: Hsn
- OE Comparison Rating: Oe Exact
- Timing Marks: No
- Pitch: .315
- Cog Quantity: 197
- Pitch Length:
- 1576
- 62.047
- Profile Type: Modified Curvilinear (iii)
- Cord Material: Fiberglass
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
12581899, 14400R9PA01, 14400RCAA01, 250329, 40329, 95329, 95329FN, B329, CD329, HS620YU20, OHC329, T329, TB329
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Acura MDX | V | 3471 | GAS | 6 Cyl 3.5L | - |
- Interference engine application
- PowerGrip Premium OE Timing Belt Component Kit W/Water Pump
- Product Attributes:
- Springs Included: No
- Bolt Quantity: 0
- Spring Quantity: 0
- Belt Top Color: Black
- Bolt Included: No
- Installation Instructions Included: Yes
- Timing Belt Width (mm): 20
- Contents: Belt, Tensioner, Hydraulic Tensioner, Idler, Water Pump, Rubber Seal Ring, Shim
- Installation Tool Included: No
- Instruction Sheet Number: 0098-1647
- Tensioner Included: Yes
- Timing Belt Timing Marks Included: No
- Timing Belt Included: Yes
- OE Component Comparison Rating: Oe Exact
- Number of Components: 5
- Gasket Quantity: 0
- Gasket Or Seals Included: Yes
- Idler Pulley Included: Yes
- Timing Belt Width (in): .787
- Belt Profile Type: Modified Curvilinear (iii)
- Belt Material: Hsn, Fiberglass Cord
- Tensioner Type: Hydraulic
- Cog Quantity: 197
- Tensioner Quantity: 2
This Part Fits the Following OEM/Substitute Numbers:
20358K, AWK1230, BWPK41184, CK329LK1, GTKWP329, PP329LK2, TB329LK1, TB329LK2, TBK329WP, TCKWP329, TKH002, USTK329, WP329K1A, WP329K1AS, WP329K2A, WP329K2AS, WPK-0013, WPK41184...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Acura RDX | V | 3471 | GAS | 6 Cyl 3.5L | - |
- Oil Filter
- H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.3 Kg)
- Product Box Height: 4.130 In. (105mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 2.810 In. (71 Mm)
- Package Material: Paperboard
- Product Box Length: 2.880 In. (73mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
0410755, 0410769, 0410789, 0410797, 0410812, 0418064, 0418075, 0418076, 0418135, 0986452036, 102827901, 1041426, 1041427, 11715829, 11715849, 120137, 120722, 122497...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Acura MDX | V | 2997 | 6 Cyl 3.0L | - |
- Interference engine application
- Timing Belt Tensioner
- Product Attributes:
- Pulley Quantity: 0
- Tensioner Type: Hydraulic Cylinder
- OE Comparison Rating: Oe Exact
- Contents: Tensioner
This Part Fits the Following OEM/Substitute Numbers:
12581902, 14520RCAA01, 420-127, 85019, 85019FN, 85067, BTH001, T43129
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2018 - Acura MDX | V | 3471 | GAS | 6 Cyl 3.5L | - |
- Timing Belt Adjuster (Adjuster Only)
- Product Attributes:
- Contact Surface Material: Cast Steel
- Adjustable: No
- Package Contents: 1 Tensioner
- Tensioner Style: Automatic - Hydraulic
- Item Grade: Regular
- Pulley Included: No
- Bracket Included: No
-
Features:
- Direct replacement - this engine timing belt tensioner is designed to match the fit and function of the original tensioner on specified applications
- Recommended for replacement when a new timing belt and pulleys are installed
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This engine timing belt tensioner is designed to match the fit and function of the original tensioner on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
This Part Fits the Following OEM/Substitute Numbers:
024-1476, 14520RCAA01, 4355767, 85019, BTH001, HA1413164, KR-114007, SK420127, T43129, T60392
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Acura RDX | V | 3471 | 6 Cyl 3.5L | - |
Showing 1 - 10 of 261 products
Loading...