Shop By Product Matching "Ks"
Choose a Model for your 2013 Jeep
Image
Product
Price
- Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
- Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
-
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Rubicon | 220 |
- Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
- Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts~Dana 44. Non-Rubicon JK; Differential Rebuild Kit; Timken Bearings; 25523 / 25590 Carrier Bearings
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
-
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Sport | 220 |
- Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
- Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44. Non-Rubicon JK; Differential Rebuild Kit; Timken Bearings; 25523 / 25590 Carrier Bearings~Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
-
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
This Part Fits the Following OEM/Substitute Numbers:
ZK D44-JK-STD
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Sahara | 220 |
- Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
- Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
-
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Unlimited Rubicon | 220 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing/Hardware; Estimated Horsepower Gain 27.86 HP At 5700 RPM;CARB E.O. D-269-107 77 Series - Metal Intake Kit For Truck or SUV; Silver
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 27.86 Hp @ 5700 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 10.400 Lbs. (4.7 Kg)
- RPM: 5700
- Product Box Height: 12.500 In. (318mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 14.250 In. (362 Mm)
- Air Filter Outlet Length: 1.000 In. (25mm)
- Product Box Length: 22.250 In. (565mm)
- Clamp Quantity: 5
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Silver
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 28 Hp
- Intake Pipe Inlet Length: 9.000 In. (229mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 4.000 In. (102mm)
- Intake Pipe Outlet Length: 9.000 In. (229mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 4.000 In. (102mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Jeep Grand Cherokee | V | 6424 | 8 Cyl 6.4L | SRT | 392 |
- Transit Auto offers the most comprehensible shock absorber and suspension kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Precision engineered suspension strut with G-Force technology for the ultimate in safety and performance
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Manufactured with ISO 5725 precision and designed for a direct fit to restore factory ride height
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- INCLUDES: 1x Rear TMC Suspension Strut + 1x Rear TOR Suspension Stabilizer Bar Link Kit
- Kit variations : KSS-107612 KSS-106766 KSS-107607
This Part Fits the Following OEM/Substitute Numbers:
18071, 18205, 2651299, 2652033, 3410018, 345844, 535-582, 536-655, 72952, 802952, GK90308, GK9231, K700530, K90308, K9231, MK90308, MK9231, N/A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Patriot | Rear |
- Transit Auto offers the most comprehensible shock absorber and suspension kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Precision engineered suspension strut with G-Force technology for the ultimate in safety and performance
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Manufactured with ISO 5725 precision and designed for a direct fit to restore factory ride height
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- INCLUDES: 2x Front TMC Suspension Strut (Both Side) + 2x Front TOR Suspension Stabilizer Bar Link Kit (Both Side)
This Part Fits the Following OEM/Substitute Numbers:
2653204, 2653205, 335883, 3417504, 72546, 802546, K750578, K750579, MS25879, MS25880, N/A, SL81413XL, SL81414XL, TK750578, TK750579
Additional Fitment Information:
| Vehicle | Block | CC | Position | Front Spring | Engine | CID |
|---|---|---|---|---|---|---|
| 2013 - Jeep Grand Cherokee | V | 3604 | Front | Coil | 6 Cyl 3.6L | 220 |
- Transit Auto offers the most comprehensible shock absorber and suspension kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Precision engineered suspension strut with G-Force technology for the ultimate in safety and performance
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Manufactured with ISO 5725 precision and designed for a direct fit to restore factory ride height
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- INCLUDES: 1x Front TMC Suspension Strut + 1x Front TOR Suspension Stabilizer Bar Link Kit
This Part Fits the Following OEM/Substitute Numbers:
2653205, 335883, 3417504, 72546, 802546, K750579, MS25880, N/A, SL81414XL, TK750579
Additional Fitment Information:
| Vehicle | Block | CC | Position | Front Spring | Engine | CID |
|---|---|---|---|---|---|---|
| 2013 - Jeep Grand Cherokee | V | 3604 | Front Right | Coil | 6 Cyl 3.6L | 220 |
- Transit Auto offers the most comprehensible shock absorber and suspension kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Precision engineered suspension strut with G-Force technology for the ultimate in safety and performance
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Manufactured with ISO 5725 precision and designed for a direct fit to restore factory ride height
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- INCLUDES: 1x Front TMC Suspension Strut + 1x Front TOR Suspension Stabilizer Bar Link Kit
This Part Fits the Following OEM/Substitute Numbers:
2653204, 335883, 3417504, 72546, 802546, K750578, MS25879, N/A, SL81413XL, TK750578
Additional Fitment Information:
| Vehicle | Block | CC | Position | Front Spring | Engine | CID |
|---|---|---|---|---|---|---|
| 2013 - Jeep Grand Cherokee | V | 3604 | Front Left | Coil | 6 Cyl 3.6L | 220 |
- Transit Auto offers the most comprehensible brake kits on the market. The unmatched braking performance coupled with longer lasting components make our brake kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- TQ OE-matched friction material gives our brake shoe the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- High density friction material to ensure a long pad life and excellent stopping power
- Precision ground maximizes friction-to-drum contact
- INCLUDES: 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic SIM Brake Pad Set (Hardware Included) + 1x Rear Top Quality Parking Brake Shoe
- Kit variations : KCN-100099 KFN-100743 KTN-100701
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1455, 1455A, 1498, 1904A, 8655, 8698, 8856, 9259, 986, 986B, AD8655, AD8698, AD8856A, CMF-D1455, CMF-D1498, D1455, D1455A, D1498...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Jeep Grand Cherokee | V | 3604 | Front and Rear | 6 Cyl 3.6L | 220 |
Showing 1 - 10 of 72 products
Loading...