Suspension Control Arm Parts


Showing 1 - 10 of 11355 products
Image
SKU
Product
Rating
Price

Skunk2 Racing
  • Lower; 40 Percent Lighter Than OEM; Includes Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 6061-T6 Aluminum; Black Anodized; Set of 2
  • Ultra Series Control Arm Set; Lower; 40 Percent Lighter Than OEM; Includes Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 6061-T6 Aluminum; Black Anodized; Set of 2;
  • Ultra Series Control Arm Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
  • Features:
    • Forged 6061-T6 Billet Aluminum
    • CNC Machined To A Precise Fit And Finish
    • 15% Lighter Than Previous Skunk2 LCAs
    • 40% Lighter Than OEM Arms
    • 7% Stronger Than Previous Skunk LCAs
    • Tuned Durometer Elastomeric Bushings To Damp Out Harshness
    • Delrin Shock Bushings For Low Friction w/Minimal Deflection
  • Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Alpha Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years and are a must-have for enthusiast looking to fine-tune their suspension for maximum handling performance while keeping budget in mind. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. When deciding on a material to base our new design on, we chose very carefully, as there are many inferior annealed and cheap versions of aluminum available on the market today. We chose 6061-T6 because of its excellent strength to weight ratio. With an ultimate tensile strength of over 42,000 PSI, and fatigue strength of 14,000 psi for 500 million cycles – we knew this would be perfect for the Alpha Series Lower Control Arms. The result of our re-engineered lower control arm is a 6061-T6 Forged Aluminum LCA, that is 15% lighter and 7% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this specific combination of bushings allows the most comfort and control under any driving conditions. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2's Rear Lower Control Arms are both..

Additional Fitment Information:
Vehicle Position
1992 - Acura Integra Rear Lower

MAS Industries
  • Suspension Control Arm
  • Product Attributes:
    • Ball Joint Stud Type: Threaded
    • End 2 Type: Press In
    • Grade Type: Regular
    • Bushing Inside Diameter: 14.3
    • Construction: Stamped
    • Ball Joint Mounting Type: Welded
    • Linkage End Type: Bushing
    • Bushing Length: 92
    • Bushing Outside Diameter: 39.6 Mm
  • Features:
    • Direct replacement - fits and performs like the original equipment on specific vehicles
    • Reliable fit - precision-engineered to match the design and dimensions of original components
    • Durable construction - manufactured to strict standards using sturdy, safe materials
    • Rigorously tested - thorough quality control measures ensure longevity
  • This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
2608037, 4CB90389, 552103Q500, 552103S050, CMS901151, RK643150, TC7414

Additional Fitment Information:
Vehicle Position Drive Type
2013 - Kia Sportage Rear Lower FWD

MAS Industries
  • Suspension Control Arm
  • w/Stamped Steel Arms
  • Product Attributes:
    • Ball Joint Stud Type: Threaded
    • End 2 Type: Press In
    • Grade Type: Regular
    • Bushing Inside Diameter: 14.3
    • Construction: Stamped
    • Ball Joint Mounting Type: Welded
    • Linkage End Type: Bushing
    • Bushing Length: 92
    • Bushing Outside Diameter: 39.6 Mm
  • Features:
    • Direct replacement - fits and performs like the original equipment on specific vehicles
    • Reliable fit - precision-engineered to match the design and dimensions of original components
    • Durable construction - manufactured to strict standards using sturdy, safe materials
    • Rigorously tested - thorough quality control measures ensure longevity
  • This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Fuel Type
2012 - Kia Optima Rear Lower GAS

MAS Industries
  • Suspension Control Arm
  • Product Attributes:
    • Ball Joint Stud Type: Threaded
    • End 2 Type: Press In
    • Grade Type: Regular
    • Bushing Inside Diameter: 14.3
    • Construction: Casting/forged
    • Ball Joint Mounting Type: Press In
    • Linkage End Type: Bushing
    • Bushing Length: 92
    • Bushing Outside Diameter: 39.6 Mm
  • Features:
    • Direct replacement - fits and performs like the original equipment on specific vehicles
    • Reliable fit - precision-engineered to match the design and dimensions of original components
    • Durable construction - manufactured to strict standards using sturdy, safe materials
    • Rigorously tested - thorough quality control measures ensure longevity
  • This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

This Part Fits the Following OEM/Substitute Numbers:
1643501406, 2607110, CMS101293, RK642636, TC3281

Additional Fitment Information:
Vehicle Position
2007 - Mercedes-Benz ML63 AMG Rear Left Upper Forward

MAS Industries
  • Suspension Control Arm
  • Product Attributes:
    • Ball Joint Stud Type: Threaded
    • End 2 Type: Press In
    • Grade Type: Regular
    • Bushing Inside Diameter: 14.3
    • Construction: Casting/forged
    • Ball Joint Mounting Type: Press In
    • Linkage End Type: Bushing
    • Bushing Length: 92
    • Bushing Outside Diameter: 39.6 Mm
  • Features:
    • Direct replacement - fits and performs like the original equipment on specific vehicles
    • Reliable fit - precision-engineered to match the design and dimensions of original components
    • Durable construction - manufactured to strict standards using sturdy, safe materials
    • Rigorously tested - thorough quality control measures ensure longevity
  • This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Additional Fitment Information:
Vehicle Position
2006 - Mercedes-Benz R350 Rear Right Upper Forward

MAS Industries
  • Suspension Control Arm
  • Product Attributes:
    • Ball Joint Stud Type: Threaded
    • End 2 Type: Press In
    • Grade Type: Regular
    • Bushing Inside Diameter: 14.3
    • Construction: Stamped
    • Ball Joint Mounting Type: Welded
    • Linkage End Type: Bushing
    • Bushing Length: 92
    • Bushing Outside Diameter: 39.6 Mm
  • Features:
    • Direct replacement - fits and performs like the original equipment on specific vehicles
    • Reliable fit - precision-engineered to match the design and dimensions of original components
    • Durable construction - manufactured to strict standards using sturdy, safe materials
    • Rigorously tested - thorough quality control measures ensure longevity
  • This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

This Part Fits the Following OEM/Substitute Numbers:
102-5917, 2606489, 552204D150, CA1394, CB90132, CMS901016, RK641681, TC5212

Additional Fitment Information:
Vehicle Position
2008 - Hyundai Entourage Rear Right Lower

MAS Industries
  • Suspension Control Arm
  • Product Attributes:
    • Ball Joint Stud Type: Threaded
    • End 2 Type: Press In
    • Grade Type: Regular
    • Bushing Inside Diameter: 14.3
    • Construction: Casting/forged
    • Ball Joint Mounting Type: Bolt In
    • Linkage End Type: Bushing
    • Bushing Length: 92
    • Bushing Outside Diameter: 39.6 Mm
  • Features:
    • Direct replacement - fits and performs like the original equipment on specific vehicles
    • Reliable fit - precision-engineered to match the design and dimensions of original components
    • Durable construction - manufactured to strict standards using sturdy, safe materials
    • Rigorously tested - thorough quality control measures ensure longevity
  • This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

This Part Fits the Following OEM/Substitute Numbers:
1643501306, 2607108, CMS101282, RK642926, TC3268

Additional Fitment Information:
Vehicle Position
2006 - Mercedes-Benz R500 Rear Left Upper Rearward

MAS Industries
  • Suspension Control Arm
  • Product Attributes:
    • Ball Joint Stud Type: Threaded
    • End 2 Type: Press In
    • Grade Type: Regular
    • Bushing Inside Diameter: 14.3
    • Construction: Stamped
    • Ball Joint Mounting Type: Bolt In
    • Linkage End Type: Bushing
    • Bushing Length: 92
    • Bushing Outside Diameter: 39.6 Mm
  • Features:
    • Direct replacement - fits and performs like the original equipment on specific vehicles
    • Reliable fit - precision-engineered to match the design and dimensions of original components
    • Durable construction - manufactured to strict standards using sturdy, safe materials
    • Rigorously tested - thorough quality control measures ensure longevity
  • This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

This Part Fits the Following OEM/Substitute Numbers:
1643501606, 2607109, CMS101283, RK642770, TC3269

Additional Fitment Information:
Vehicle Position
2006 - Mercedes-Benz R500 Rear Right Upper Rearward

MAS Industries
  • Suspension Control Arm
  • Product Attributes:
    • Ball Joint Stud Type: Threaded
    • End 2 Type: Press In
    • Grade Type: Regular
    • Bushing Inside Diameter: 14.3
    • Construction: Casting/forged
    • Ball Joint Mounting Type: Welded
    • Linkage End Type: Bushing
    • Bushing Length: 92
    • Bushing Outside Diameter: 39.6 Mm
  • Features:
    • Direct replacement - fits and performs like the original equipment on specific vehicles
    • Reliable fit - precision-engineered to match the design and dimensions of original components
    • Durable construction - manufactured to strict standards using sturdy, safe materials
    • Rigorously tested - thorough quality control measures ensure longevity
  • This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

This Part Fits the Following OEM/Substitute Numbers:
2183300711, NI, TC3918

Additional Fitment Information:
Vehicle Position Drive Type
2013 - Mercedes-Benz CLS550 Front Left Lower Rearward RWD

MaxTrac
  • CONTROL ARMS
  • ALL 8 ARMS ARE FULLY ADJUSTABLE FOR WHEEL BASE ADJUSTMENT, DRIVE LINE CORRECTION & CASTER CORRECTION THESE ARMS ALLOW FOR MORE SUSPENSION FLEX WHEN OFFROADING REBUILDABLE ENDS FEATURE A CHROMOLY HOUSING, URETHANE BUSHINGS, A SPHERICAL CENTER SUPPORT & GREASE FITTINGS FOR EASY LUBING COMES W/ FACTORY RUBBER BUSHINGS AT FIXED END THAT DO NOT REQUIRE SERVICING & ALLOW FOR ROAD NOISE REDUCTION MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
  • ADJUSTABLE CONTROL ARM KIT (8 PCS)
  • MAXTRAC SUSPENSION'S PART# 859700-8 IS A COMPLETE 8 PIECE SET OF ADJUSTABLE CONTROL ARMS FABRICATED FROM STEEL & POWDER COATED GREY

Additional Fitment Information:
Vehicle
2014 - Jeep Wrangler
Showing 1 - 10 of 11355 products

Loading...