1993 Jeep Yukon Gear Parts
Choose a Model for your 1993 Jeep
Image
Product
Price
- Yukon replacement standard open carrier case for Dana 30; 3.73/up
- Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Reverse Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
- Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
- Carrier Case
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
- Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1993 - Jeep Wrangler | L | - | Front | 6 Cyl 4.0L | 242 |
- Yukon replacement standard open carrier case for Dana 30; 3.73/up
- Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Reverse Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
- Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
- Carrier Case
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
- Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1993 - Jeep Grand Wagoneer | V | 5211 | Rear | 8 Cyl 5.2L | 318 |
- Yukon Rear Axle Bearing/Seal Kit for Various Differentials
- 8.2 in./8.5 in. 10 Bolt; AMC 35 Reverse/AMC 35/AMC 20; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles AMC Model 35; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 1 Year Warranty Against Manufacturer Defects
- Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1993 - Jeep Cherokee | Rear | 4WD |
- Yukon replacement standard open carrier case for Dana 30; 3.73/up
- Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
- Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
- Carrier Case
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
- Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1993 - Jeep Grand Cherokee | V | 5211 | Front | 8 Cyl 5.2L | 4WD | 318 |
- Yukon replacement standard open carrier case for Dana 30; 3.73/up
- Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
- Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
- Carrier Case
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
- Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1993 - Jeep Grand Cherokee | V | 5211 | Rear | 8 Cyl 5.2L | 4WD | 318 |
- Yukon Chromoly Front Axle Kit; Dana 30; Both Sides; 27 Spline; 1310 U-Joints
- 4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints Dana 30 Front Axle Kit; 4340 Chrome-Moly Shafts; 27 Spline Inner and Outer Axles; Spicer U-Joints; and Disconnect Block Off Kit with Axle Seals~Dana 30; Crush Sleeve Design; 4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Axle Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Jeep Wrangler And Cherokee Front w/Dana Spicer 30
- Front Axle Kit
- 4340 Chromoly Axles
- 27 Spline Inner Axles
- Includes Inner And Outer Axle Shafts w/Spicer U-Joints
- Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.
This Part Fits the Following OEM/Substitute Numbers:
ZA W24110
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1993 - Jeep Grand Cherokee | Front | 4WD |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1993 - Jeep Cherokee | L | - | Front | 6 Cyl 4.0L | 4WD | 242 |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1993 - Jeep Cherokee | L | - | Rear | 6 Cyl 4.0L | 4WD | 242 |
- Yukon standard open spider gear kit for Model 35 with 27 spline axles
- Dana 35; 27 Spline; 1.560 in. Side Gear Bore AMC Model 35; Dana 35; 27 Spline; 1.560 in. Side Gear Bore~Model 35; Dana 35; Standard Open Spider Gear Kit; 27 Spline; 1.560 in. Side Gear Journal
- Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits AMC Model 35 Open Differential w/1.560 in. Side Gear Bore
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
This Part Fits the Following OEM/Substitute Numbers:
ZIKM35-S-27-1.5
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1993 - Jeep Grand Cherokee | RWD |
- Yukon standard open spider gear kit for Dana 30 with 27 spline axles
- Dana 30/Reverse; 27 Spline Dana 30; Reverse Rotation; 27 Spline~Dana 30; Spider Gear Set; 27 spline; Fits Standard Open Carrier
- Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fit Dana Spicer 30 Open Differential w/27 Spline Axles
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
This Part Fits the Following OEM/Substitute Numbers:
ZIKD30-S-27
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - Jeep Wrangler |
Showing 1 - 10 of 46 products
Loading...