2001 Chevrolet Rough Country Parts
Choose a Model for your 2001 Chevrolet
Image
Product
Price
- 2 in. Block And Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black
- U-Bolt Kit; 2 in. Block And U-Bolt Kit; Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black;
- U-Bolt Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
- Tapered To Reduce Drive Shaft Angle
- Single 9/16 in. Pin Blocks
- 2.5 in. Wide
- Powder Coated Black
- U-Bolts Are E-Coated Black
- Corrosion Resistant
- Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat. Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Chevrolet Silverado 1500 |
- Pair; Forged; Tie Rod Assemblies
- Heavy Duty Tie Rod Kit; Pair; Forged; Tie Rod Assemblies;
- Heavy Duty Tie Rod Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Heavy Duty Replacement Tie Rod Assemblies. Bend Resistant
- Replaces The OE Inner And Outer Tie Rod Assembly
- Sold In Pairs
- Forged SAE1045 Steel Outer Tie Rod With Heat-Treated 4140 Ball Stud
- 4140 Inner Adjustment Shaft With A SAE1045 Steel Ball-Joint Housing
- 22mm Adjustment Threads
- Dont settle for weak tie rods! You want your steering and suspension to be as strong as the truck you love. Thats why you need Rough Countrys HD Forged Tie Rod Kit. This upgrade is a great replacement for stock parts, especially if youre going off-road or towing a heavy load. Our tie rod ends give you a smoother ride, better turn-in response, and increased safety. Because sometimes stock just isn't strong enough and Reliable. You never know what kind of terrain you'll encounter or what obstacles may get in your way. Thats why you can rely on the rugged durability of our HD Tie Rod Kit to keep you going where you need to go. They are bend-resistant, have 22mm adjustment threads, and replace the inner, and outer tie rod ends. These heavy-duty tie rod end assemblies are made with forged steel and include an adjustable shaft and steel ball-joint housing. With these heavy-duty replacements, you can keep your vehicle on the road and out of the shop. Installation Rough Countrys Tie Rod Kit is a no-cutting, bolt-on installation. Warranty. Rough Countrys HD Forged Tie Rod Kit comes with our industry-leading warranty.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2001 - Chevrolet Silverado 2500 HD | 4WD |
- Includes Mounting Brackets and Hardware Only Fits Models w/0-3 In. Lift Suspension~Superseded From PN[87326.20]
- N3 Steering Stabilizer; Includes Mounting Brackets and Hardware;
- N3 Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-on Installation.
- Improves Control And Handling.
- Reduces Bump Steer.
- Reduces Tie Rod And Ball Joint Wear And Tear.
- Chrome Hardened 9/16 in. Piston Rod
- Steering stabilizers are designed to restrain in.bump steering in. and front end vibration, giving added life to tires, ball joints, and other steering components and are highly recommended for vehicles running aftermarket tires. The durable 18mm chrome hardened piston rod and large-bodied cylinder dwarfs factory equipment, ensuring a more effective vibration damping each and every time you take to the trails. Rough Countrys N3 Steering Stabilizer kit is easy to install, with a 100% bolt-on installation process that can be installed in a home garage with common tools.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2001 - Chevrolet Silverado 2500 HD | Front | 4WD |
- Includes [1] V2 Hardware
- Steering Stabilizer; Includes [1] V2 Steering Stabilizer; Hardware;
- Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Improves Control And Handling
- Reduces Bump Steer
- Reduces Tie Rod And Ball Joint Wear And Tear
- Superior Design and Comfort. Give yourself peace of mind when upgrading to a larger wheel and tire set up with Rough Country's V2 stabilizers! Steering stabilizers are designed to restrain 'bump steer' and front-end vibration, giving added life to tires, ball joints, and other steering components. Rough Country's V2 stabilizers improve the overall driving experience by providing precise dampening raising the vehicle's overall comfort and functionality. Durable Construction. Rough Country's V2 stabilizers boast a T6061 brushed aluminum body with black anodized accents giving it a striking visual appearance that also dissipates heat faster than other materials. The internal 46mm high-flow piston offers countless years of durability. Rough Country's V2 stabilizers are the pinnacle of a true performance upgrade. Installation. Rough Country's V2 stabilizers can be installed in no time! This full kit can be installed at home using standard tools and can be completed efficiently and quickly! 3-Year Warranty. Rough Country's V2 stabilizers are backed with Rough Country's 3-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2001 - Chevrolet Tahoe | Front | 4WD |
- Rear; 6-8 in.; Monotube; 30.08 in. Extended Length; 17.8 in. Collapse Length; w/6 - 8 in. Lift
- M1 Shock Absorber; Rear; 6-8 in.; Monotube; 30.08 in. Extended Length; 17.8 in. Collapse Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 17.800 In.
- Shock Stroke: 12.280 In.
- WARNING CA Proposition 65: No
- Extended Length: 30.080 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2001 - Chevrolet S10 | Rear | LS |
- 2 in. Lift Install Time 4-6 Hours~Includes The Following Parts~Necessary Installation Hardware~Front And Rear Premium N2.0 Series Shocks~Add-A-Leaf Springs~Coil Springs
- Suspension Lift Kit w/Shocks; 2 in. Lift;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- Incredible Ride Quality And Performance
- Easy Bolt-On Installation
- Includes Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- Suspension Lift Kit w/Shocks; 2 in. Lift;
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2001 - Chevrolet S10 | V | - | 6 Cyl 4.3L | Base | RWD | 262 |
- Front; 6.5-7.5 in.; Monotube; 23.82 in. Extended Length; 14.37 Collapsed Length; w/6.5 - 7.5 in. Lift
- M1 Shock Absorber; Front; 6.5-7.5 in.; Monotube; 23.82 in. Extended Length; 14.37 Collapsed Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 14.370 In.
- Shock Stroke: 9.450 In.
- WARNING CA Proposition 65: No
- Extended Length: 23.820 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2001 - Chevrolet Blazer | Front | LT | 4WD |
- 6 in. Lift Requires Exhaust Modification~Requires Cutting and Drilling~Requires Rear Axle Flip~Install Time 8-10 Hours~Includes The Following Parts~U-Bolts~Necessary Installation Hardware~Front And Rear Premium N2.0 Series Shocks~Axle Perches~Brake Line Bracket~Control Arm Drop Brackets~Crossmembers~Differential Drop Brackets~Skid Plate~Shock Mounts~Steering Stabilizer Bracket~Steering Link~Steering Stabilizer~Sway-Bar Brackets~Torsion Bar Drop Bracket~U-Bolt Plates~Upper Control Arm Brace
- Suspension Lift Kit w/Shocks; 6 in. Lift;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: No
-
Features:
- Increased Ground Clearance
- Laser CNC Precision Parts
- Maintains Factory Geometry And Optimum Component Angles
- Front Skid Plate Is Made From HD 3/16 in. Grade 50 Plate Steel
- Includes Application Valved N2.0 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- Here at Rough Country we think everyone should have an opportunity to enjoy the same off-road lifestyle, so we offer amazing equipment at an incredible value and back it with top quality, unbeatable service, and a life time warranty! Now, S-10 owners have a whole new reason to be excited about their trucks! Rough Country is proud to announce the first affordable, all-inclusive 6in lift kit for 94-04 Chevy S10s! This kit comes with everything you need to go off the pavement and into the mudholes. This lift kit was designed to preserve factory ride quality, featuring several brackets and hardware designed to keep optimum angles of all components after lifting. Engineered by Rough Country, this kit focuses on offering top-notch components at an incredible price. With fabricated brackets, a beefy crossmember, and a 3/16in grade 50 plate steel skid plate, and Laser CNC parts, youre looking at long-lasting satisfaction for your truck! With 6 in. of ride height, thats enough to run up to 265/75-16 tires with a 16x8 wheel!
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2001 - Chevrolet S10 | V | - | 2 | 6 Cyl 4.3L | LS | 262 |
- 1 pc.; 20x9 [6x5.5/6x135]
- Series 93 Wheel; 1 pc.; 20x9 [6x5.5/6x135];
- Series 93 Wheel
- Product Attributes:
- WARNING CA Proposition 65: No
- Wheel Width: 20
- Size: 20x9
- Wheel Diameter: 9
- Backspace: 5
- Bolt Pattern:
- 6x135
- 6x5.5
-
Features:
- Matte Black W/milled Accents Finish
- 7-spoke Design
- Single-piece Aluminum Construction
- Super Light Wheel
- Includes A Rough Country Carbon Fiber Design Center Cap
- Backed By A 1-year Finish
- Limited Lifetime Structural Warranty
- Set yourself apart from the pack with Rough Countrys One-Piece Series 93 Wheels. This 7-spoke black and machined wheel offers an incredible look thats sure to turn heads. This one-of-a-kind wheel features 7 spokes that flare out near the lip for a dramatic visual style thats perfect for any lifted vehicle. This stylish wheel features a gloss black coat with machined accents that pop under any truck or Jeep.Rough Countrys Series 93 is a one-piece wheel design, constructed from a single piece of heavy-duty aluminum for the optimal balance of weight and performance. Each Series 93 Wheel includes dual machined 'œRough Country' logos and a center cap with 'œRC' carbon fiber logo design and includes a limited lifetime warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Chevrolet Tahoe |
- 1 pc.; 20x9 [6x5.5/6x135]
- Series 94 Wheel; 1 pc.; 20x9 [6x5.5/6x135];
- Series 94 Wheel
- Product Attributes:
- WARNING CA Proposition 65: No
- Wheel Width: 20
- Size: 20x9
- Wheel Diameter: 9
- Backspace: 5
- Bolt Pattern:
- 6x135
- 6x5.5
-
Features:
- Matte Black W/milled Accents Finish
- 7-spoke Design
- Single-piece Aluminum Construction
- Super Light Wheel
- Includes A Rough Country Carbon Fiber Design Center Cap
- Backed By A 1-year Finish
- Limited Lifetime Structural Warranty
- Give your vehicle an aggressive, new look with Rough Countrys One-Piece Series 94 Wheels. This 8-spoke black and machined wheel offers an incredible look thats sure to turn heads.This wheel features 8 spokes for a dramatic visual style thats perfect for any lifted vehicle. This spoke design allows you to see more of the components behind the wheel for a sporty look and feel. This stylish wheel features a black coat with machined accents that pop under any truck or Jeep.Rough Countrys Series 94 is a one-piece wheel design, constructed from a single piece of heavy-duty aluminum for the optimal balance of weight and performance.Each Series 94 Wheel includes stamped 'œRough Country' logos and a center cap with 'œRC' carbon fiber logo design as well as a limited lifetime warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Chevrolet Suburban 1500 |
Showing 1 - 10 of 209 products
Loading...