Shop By Product Matching "Curt"
Image
Product
Price
- Replacement TruTrack Weight Distribution L-Pins/Clips
- CURT 17513 Replacement TruTrack Weight Distribution Hitch L-Pins and Clips
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- For TruTrack Weight Distribution System
- Helps Hold Spring Bars In Place
- While many weight distribution hitches are made to be compatible with a sway control attachment, the CURT TruTrack is an advanced WD system that integrates the sway control function into the design of the hitch. It combines precise weight distributing with integrated sway control to deliver the smoothest, safest ride possible. This replacement pack of L-pins and clips is used for holding the spring bars of the TruTrack in place on the adjustable support brackets. After the spring bars are leveraged onto the support brackets, these pins and clips easily drop into the brackets and are secured with the wire clips. Two L-pins and two clips are included in this package.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Adjustable Weight Distribution Shanks
- CURT 45933 Dual Ball Attachment for Weight Distribution Shank; 2 and 2-5/16-Inch; Up to 15;000 lbs
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Instantly Transforms Your WD Shank Into An Adjustable Hitch
- Fits Standard WD Shanks With Holes Spaced 2-1/2 in. On-Center
- Adjustable Design Allows For Quick And Precise Trailer Leveling
- Compatible With All CURT WD Shanks
- Built-In Anti-Rattle Helps Promote Quiet Towing
- Unique Clip Design Installs Easily Over Both Pins And Is Vibration-Resistant
- High-Strength Forged Steel Construction For Dependable Towing
- Durable Carbide Powder Coat Finish With Chrome-Plated Trailer Balls
- 2 in. Ball Rated For 10000 Lbs. And 2-5/16 in. Rated For 15000 Lbs. [With 2 in. Shank]
- The CURT dual ball attachment provides the benefit of having two trailer ball sizes in one. Make adjustments on the go with its 2 in. and 2-5/16 in. balls, and tow up to 15,000 lbs. The dual ball design allows your CURT WD shank to adjust for raising and lowering your ball height for quick and precise trailer leveling.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Replacement Weight Distribution Hookup Brackets (2-Pack)
- CURT 17208 Replacement Weight Distribution Hitch Hookup Brackets
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Allows For Secure Mounting Of Spring Bar On The Trailer Frame
- Perfect For Use On Trailers w/Lp Tanks Or Other Obstructions
- Replaces Factory Brackets
- Snap-Up Design Allows For Easy Leveraging Of Spring Bar
- Bracket Protected By A Highly Durable Carbide Powder Coat Finish
- The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailers and vehicles axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads. These replacement weight distribution hookup brackets make it easy to attach spring bars to the tongue frame of your trailer and get the exact tension needed to level your towing setup. They feature a bolt-on mounting system for secure attachment to your trailer and offer a snap-up design that can be leveraged into place with a weight distribution lift handle #17112. To ensure long-lasting use, these replacement spring bar hangers come with a durable powder coat finish.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Replacement Weight Distribution Hookup Bracket
- CURT 17008 Replacement Weight Distribution Hitch Hookup Bracket
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Allows For Secure Mounting Of Spring Bar On The Trailer Frame
- Replaces Factory Spring Bar Brackets Or Hangers
- Snap-Up Design Allows For Easy Leveraging Of Spring Bar
- Bracket Protected By A Highly Durable Carbide Powder Coat Finish
- The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailers and vehicles axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads. This replacement weight distribution hookup bracket makes it easy to attach a spring bar to the tongue frame of your trailer and get the exact tension needed to level your towing setup. It features a bolt-on mounting system for secure attachment to your trailer and offers a snap-up design that can be leveraged into place with a weight distribution lift handle #17112. To ensure long-lasting use, this replacement spring bar hanger comes with a durable powder coat finish. One hanger is included in this package. Two spring bars are always required when using a weight distribution hitch.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- 2in. x 24in. Raw Steel Hitch Bar
- CURT 49536 2-Inch x 24-Inch Weld-On Raw Steel Trailer Hitch Bar Shank
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits All 2 In. X 2 In. Receiver Tube Openings
- Rounded Corners For Easier Insertion Into The Receiver
- Constructed From High-Strength Hot-Rolled Steel
- Raw Finish Allows For Immediate Welding
- Features A Pre-Drilled Hitch Pin Hole
- Made In USA
- For the do-it-yourselfer, CURT offers an entire line of towing fabrication components to supply you with the quality building blocks you need. These raw steel components are made from solid steel for maximum strength, and they come ready to be welded together in whatever form you need to get the job done. This fabrication steel hitch bar features a standard 2 in. x 2 in. shank and comes with rounded corners for easier mounting. It has an overall length of 24 in. and comes with a pre-drilled hole in the shank to accept a hitch pin and clip.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- 2in. x 8in. Raw Steel Hitch Bar
- CURT 49537 2-Inch x 8-Inch Weld-On Raw Steel Trailer Hitch Bar Shank
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits All 2 In. X 2 In. Receiver Tube Openings
- Rounded Corners For Easier Insertion Into The Receiver
- Constructed From High-Strength Hot-Rolled Steel
- Raw Finish Allows For Immediate Welding
- Features A Pre-Drilled Hitch Pin Hole
- Made In USA
- For the do-it-yourselfer, CURT offers an entire line of towing fabrication components to supply you with the quality building blocks you need. These raw steel components are made from solid steel for maximum strength, and they come ready to be welded together in whatever form you need to get the job done. This fabrication steel hitch bar features a standard 2 in. x 2 in. shank and comes with rounded corners for easier mounting. It has an overall length of 8 in. and comes with a pre-drilled hole in the shank to accept a hitch pin and clip.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- TruTrack Weight Distribution Hardware Kit for #17501
- CURT 17554 Replacement TruTrack 4P Weight Distribution Hitch Hardware Kit for #17501
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Replacement Hardware For The Curt Trutrack Wd Hitch #17501
- While many weight distribution hitches are made to be compatible with a sway control attachment, the CURT TruTrack is an advanced WD system that integrates the sway control function into the design of the hitch. It combines precise weight distributing with integrated sway control to deliver the smoothest, safest ride possible. This replacement hardware kit for the TruTrack trunnion bar weight distribution hitch #17501 includes the necessary hardware for attaching the weight distribution head, the adjustable shank and the spring bars. It includes nuts, bolts, safety pins and a pin & clip.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Weight Distribution Shank (2in. Shank; 2in. Drop; 6in. Rise)
- CURT 17103 Replacement Weight Distribution Hitch Shank; 2-Inch Receiver; 2-In Drop; 6-Inch Rise
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Provides Adjustable Mount For Most Weight Distribution Hitches
- Features Multiple Holes For Adjustable Head Height
- Can Be Flipped To Provide Necessary Drop Or Rise
- 3/4 In. Diameter Holes Are Spaced 1 1/4 In. From Center To Center
- Fits 2 In. X 2 In. Receiver Tube Openings
- Constructed From Solid Steel For Reliable Strength
- Protected By A Durable Powder Coat Finish
- When it comes to enjoying your passion, we think towing equipment should never be the limiting factor. This CURT weight distribution replacement shank is designed for heavy-duty towing, versatile adjustment of your weight distribution hitch and long-lasting reliability. Made from high-strength steel and tested for safety, this WD replacement shank is perfect for a variety of tough jobs and long journeys. It is compatible with all CURT weight distribution hitches and has a 2 in. shank with a 5/8 in. hitch pin hole to fit any 2 in. x 2 in. receiver tube opening with a 5/8 in. hitch pin hole, including most CURT class 3, class 4 and Xtra Duty class 5 trailer hitches. While the receiver tube shank measures 2 in. x 2 in., the vertical shank offers a universal fit to be compatible with all CURT weight distribution hitches. Holes in the vertical shank are spaced 1-1/4 in. center-to-center and have a 3/4 in. diameter, allowing for flexible adjustment of the WD head for precise leveling of the vehicle-trailer combination. This weight distribution shank can be positioned in the rise position for a maximum rise of 6 in. or flipped into the drop position for a maximum drop of 2 in.. To ensure durability and long-lasting use, CURT weight distribution replacement shanks are constructed from solid steel and shielded with a highly durable carbide black powder coat finish. This protects them from rain, snow, dirt, road salt and much more for lasting corrosion resistance.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Weight Distribution Spring Bar
- CURT 19276 Replacement TruTrack 2P Weight Distribution Hitch Spring Bar; 10K
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Mounts To A Trutrack 2P WD Hitch To Help Level The Trailer And Tow Vehicle
- Fits CURT Round Bar Weight Distribution Hitches PN [17600/17601]
- Constructed From Forged Steel For Optimum Strength
- Protected By A Highly Durable Carbide Powder Coat Finish
- Your route is planned and the trails are calling, but before you can cover any ground, you need to start with a solid connection between your tow vehicle and trailer. The CURT round bar weight distribution hitch with integrated lubrication offers a smooth ride and level towing with its heavy-duty components and built-in lubrication system. From travel trailers to popup campers, the CURT WD hitch is the perfect camping companion to let you Bring It. This replacement spring bar is designed to fit CURT round bar weight distribution hitches #17600 and #17601. It features forged steel construction and a durable powder coat finish for long-lasting use. It offers a gross trailer weight capacity of 8,000 - 10,000 lbs. and a tongue weight capacity of 800 - 1,000 lbs.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Weight Distribution Shank (2in. Shank; 2in. Drop; 6in. Rise)
- CURT 17100 Replacement Weight Distribution Hitch Shank; 2-Inch Receiver; 2-In Drop; 6-Inch Rise
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Provides Adjustable Mount For Most Weight Distribution Hitches
- Features Multiple Holes For Adjustable Head Height
- Can Be Flipped To Provide Necessary Drop Or Rise
- 3/4 In. Diameter Holes Are Spaced 1 1/4 In. From Center To Center
- Fits 2 In. X 2 In. Receiver Tube Openings
- Constructed From Solid Steel For Reliable Strength
- Protected By A Durable Powder Coat Finish
- When it comes to enjoying your passion, we think towing equipment should never be the limiting factor. This CURT weight distribution replacement shank is designed for heavy-duty towing, versatile adjustment of your weight distribution hitch and long-lasting reliability. Made from high-strength steel and tested for safety, this WD replacement shank is perfect for a variety of tough jobs and long journeys. It is compatible with all CURT weight distribution hitches and has a 2 in. shank with a 5/8 in. hitch pin hole to fit any 2 in. x 2 in. receiver tube opening with a 5/8 in. hitch pin hole, including most CURT class 3, class 4 and Xtra Duty class 5 trailer hitches. While the receiver tube shank measures 2 in. x 2 in., the vertical shank offers a universal fit to be compatible with all CURT weight distribution hitches. Holes in the vertical shank are spaced 1-1/4 in. center-to-center and have a 3/4 in. diameter, allowing for flexible adjustment of the WD head for precise leveling of the vehicle-trailer combination. This weight distribution shank can be positioned in the rise position for a maximum rise of 6 in. or flipped into the drop position for a maximum drop of 2 in.. To ensure durability and long-lasting use, CURT weight distribution replacement shanks are constructed from solid steel and shielded with a highly durable carbide black powder coat finish. This protects them from rain, snow, dirt, road salt and much more for lasting corrosion resistance.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Showing 1 - 10 of 51 products
Loading...