Image
Product
Price
- Stabilizer Bar Link Kit
- Thermoplastic Bushings
- Product Attributes:
- Spacer Included: No
- Mounting Hardware Included: Yes
- Grade Type: Regular
- Bushing Color: Red
- Length: 8.7
- End 1 Type: Male Threaded
- Link Material: Steel; Rubber
- Bushings Included: Yes
- Greaseable: No
- End 2 Type: Hex Head
- Locking Nuts Included: No
- Sleeve Included: No
- Weight: 0.59 Lb
- Bushing Material: Rubber
- Bolt Thread Size:
- 0.5
- 0.625
- 0.75
- 0.375
- Sleeve Length: 4
- Package Contents: 1 Bolt; 1 Nut; 4 Bushings; 4 Washers; 1 Sleeve
- Bushing Inside Diameter: 0.375
- Washers Included: No
- End 1 Attachment Size : 3/8 In; 1/2 In; 5/8 In; 3/4 In; 1 In
- Bushing Outside Diameter: 1.2
- Threaded End: Yes
- Grease Fittings Included: No
- Pre-Greased: No
- Bolts Included: No
- Dust Boot Included: No
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10385580, 2103008, 45G20642, 606.66002, GK6428, JTS1383, K6428, K700537, K8987, MK6428, SK80631, SL742E, TC1833
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Chevrolet Express 2500 | Front |
- with 3.0 (in) Maximum Lift Rear
- Optimize your rig’s handling and rear axle alignment to avoid premature tire wear and unwanted handling characteristics, especially on lifted vehicles. Bar installs easily and can be adjusted on the vehicle to properly center the rear axle.
- 18-UP JL REAR ADJ TRACK BAR KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Bushing
- Bushings Included: Yes
- Greaseable: No
- Grease Fitting Included: No
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Title: 18-up Jl Rear Adj Track Bar Kit
- Bushing Material: Polyurethane
-
Features:
- Easy install into OEM mounts with application specific hardware
- Allows for full suspension articulation without binding
- Dual stage powder coat finish provides excellent corrosion resistance
- “ICON 1K” tested under rigorous off-road conditions to validate performance, strength, and durability
- Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing
- On vehicle adjustable for precise track alignment using ICON’s Double Adjuster
- Maintenance free, multi-durometer bushing and JM12T rod end minimize deflection while maximizing responsiveness
- Upgrading your Jeep Wrangler's rear track bar is a great solution ensure that the Jeep’s axle is properly centered under the vehicle in addition to providing other useful benefits. ICON’s Double Adjuster allows for on vehicle adjustment to streamline the rear-end alignment after installation. A maintenance free, multi-durometer bushing paired with a 3/4” rod end bearing virtually eliminate the deflection that is common in the stock track bar bushings for improved vehicle handling. Overall articulation is also improved by allowing the suspension to cycle fully without binding.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2022 - Jeep Wrangler | Rear | DIESEL | Unlimited Sport Altitude |
- with 2.5 (in) - 3.0 (in) Suspension Lift
- These billet aluminum front sway bar links correct the sway bar angle in vehicles with 2.5" of lift. High-quality FK rod end bearings eliminate bushing deflection for confidence inspiring handling and maximum articulation without binding.
- 18-UP JL/20-UP JT FRONT SWAY BAR LINK KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Bushing Color: Gold
- Washers Included: Yes
- End 1 Type: Rod End Bearing
- Front Or Rear Suspension: Front
- Greaseable: No
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Grease Fittings Included: No
- Locking Nuts Included: Yes
- Pre-Greased: No
- Bolts Included: Yes
- Dust Boot Included: No
- Title: 18-up Jl/20-up Jt Front Sway Bar Link Kit
- Bushing Material: Rod End Bearing
-
Features:
- Billet aluminum sway bar links with laser etched ICON logos
- Adjustable while installed on vehicle to fine tune sway bar angle
- High quality FK rod ends eliminate bushing deflection for improved handling
- These billet aluminum front sway bar links for your 2018-Up Jeep Wrangler JL and 2020-Up Jeep Gladiator JT correct the sway bar angle for use with 2.5" of lift while on vehicle adjustment allows for further fine tuning of the sway bar angle. High quality FK rod end bearings also eliminate bushing deflection common with stock bushings for confidence inspiring handling characteristics and allow for maximum articulation without binding.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2022 - Jeep Wrangler | Front | GAS | Unlimited Sport S |
- Adjustable Rear Sway Bar End Links
- Not compatible with aftermarket sway bars Requires Front 3" to 6" of Lift Rear 0" to 6" of Lift Front installation requires drilling
- Adjustable Rear Sway Bar End Links | Wrangler JK and JL
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- Installation Time: 1-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 15.00
- Title: Adjustable Rear Sway Bar End Links
-
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Maintain proper balance between front and rear sway bars for safer, more predictable on-road driving
- Tension-free rod ends offer 45 degrees of mounting alignment for reduced wear on related components
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
- Also fits Wrangler JK right hand drive models
- Retain the handling of your Jeep Wrangler JK with rear adjustable sway bar links to retain proper sway geometry after lifting your Jeep. The adjustable rear sway bar end links allow for proper use of the rear sway bar and improve handling on and off road. A common misconception among Jeep owners is that the rear sway bar is unnecessary off-road and should be removed. This is not true however, as the rear sway bar is small and flexible enough to allow plenty of suspension articulation.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Jeep Wrangler | Rear | Rubicon |
- Adjustable Rear Sway Bar End Links
- Not compatible with aftermarket sway bars Requires Front 3" to 6" of Lift Rear 0" to 6" of Lift
- Adjustable Rear Sway Bar End Links | Wrangler JK and JL
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- Installation Time: 1-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 15.00
- Title: Adjustable Rear Sway Bar End Links
-
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Maintain proper balance between front and rear sway bars for safer, more predictable on-road driving
- Tension-free rod ends offer 45 degrees of mounting alignment for reduced wear on related components
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
- Also fits Wrangler JK right hand drive models
- Retain the handling of your Jeep Wrangler JK with rear adjustable sway bar links to retain proper sway geometry after lifting your Jeep. The adjustable rear sway bar end links allow for proper use of the rear sway bar and improve handling on and off road. A common misconception among Jeep owners is that the rear sway bar is unnecessary off-road and should be removed. This is not true however, as the rear sway bar is small and flexible enough to allow plenty of suspension articulation.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Jeep Wrangler | Rear | Willys |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Mini Cooper Clubman | Front |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- anufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
18750154, 2653018, 545-1732, 58180039, GS25818, JTS651, K750154, MS25818, SL81335, TK750154
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2022 - Dodge Challenger | Front | AWD |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- anufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
GS90899, K750891, MS90899, N/A, SL63165, SL63165PR, TK750891
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Hyundai Santa Fe | Front |
- Quicker Disconnect Sway Bar Links
- Not compatible with aftermarket sway bars Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel 2.5-6" Lift
- Quicker Disconnect Sway Bar Links | 2.5"-6.0" Lift | Wrangler JL and Gladiator JT
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- Installation Time: 1-2
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
-
Features:
- Fits vehicles with 2.5"-6.0" Lift Only
- Includes a pair of frame mounted retention brackets to keep the links and sway bar in place when disconnected
- Gain up to 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Enhance your Jeep Wrangler JL or Gladiator JT's articulation up to 30% with JKS Quicker Disconnect Sway Bar End Links. Designed for JL or JT Jeeps with 2.5"-6" lift, JKS Quicker Disconnect Sway Bar End Links feature quick-release pins that make it easy to decouple and reconnect your sway bar. The variable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2022 - Jeep Gladiator | United States |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- Use To Depletion, Then Use TOR-K90344
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- anufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
18299, 2653499, GK90344, K750913, MK90344, N/A, See
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Toyota Avalon | Front |
Showing 1 - 10 of 59 products
Loading...