1987 Exhaust Tail Pipe Parts

Choose a Make for your 1987 vehicle

Buick Chevrolet Ford GMC Porsche Saab Volkswagen

Showing 1 - 8 of 8 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1987 Buick Regal Exhaust Tail Pipe 6 Cyl 3.8L Flowmaster

Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required Use Offset Inlet/Offset Outlet Mufflers Only
Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
Tailpipe Set
Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exit Position: Dual Rear
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1987 - Buick Regal	V	3800	6 Cyl 3.8L	Base	231

3 In Stock

$363.17 USD

$435.80 USD

Brand	Flowmaster
Part #	F1315817
Condition	New
Warehouse	B

1987 Chevrolet El Camino Exhaust Tail Pipe 6 Cyl 4.3L Flowmaster

Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
Tailpipe Set
Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exit Position: Dual Rear
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1987 - Chevrolet El Camino	V	-	6 Cyl 4.3L	262

3 In Stock

$363.17 USD

$435.80 USD

Brand	Flowmaster
Part #	F1315817
Condition	New
Warehouse	B

1987 Chevrolet R10 Exhaust Tail Pipe 8 Cyl 5.0L Flowmaster

Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
Tailpipe Set
Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Exit Position: Single Side
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- Gray Color
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1987 - Chevrolet R10	V	-	8 Cyl 5.0L	305

2 In Stock

$315.53 USD

$378.64 USD

Brand	Flowmaster
Part #	F1315803
Condition	New
Warehouse	B

1987 Saab 900 Exhaust Tail Pipe Starla

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle	Aspiration
1987 - Saab 900	Turbocharged

Brand	Starla
Part #	STA1842210
Condition	New
Warehouse	A

1987 Porsche 911 Exhaust Tail Pipe 6 Cyl 3.2L Dansk - JP Group

1987 Porsche 911 Exhaust Tail Pipe 6 Cyl 3.2L Dansk - JP Group

Black

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1987 - Porsche 911	H	3163	6 Cyl 3.2L	-

Brand	Dansk - JP Group
Part #	DSK2212847
Condition	New
Warehouse	A

1987 Volkswagen Vanagon Exhaust Tail Pipe Dansk - JP Group

Additional Fitment Information:

Vehicle	Sub Model
1987 - Volkswagen Vanagon	GL

Brand	Dansk - JP Group
Part #	DSK1733739
Condition	New
Warehouse	A

1987 Ford Mustang Exhaust Tail Pipe 8 Cyl 5.0L Flowmaster

Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Includes Hangers/Stainless Tips; Offset Inlet/Offset Outlet Mufflers Required; 409 Stainless Steel
Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Includes Hangers/Stainless Tips; Offset Inlet/Offset Outlet Mufflers Required; 409 Stainless Steel;
Tailpipe Set
Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Position: Dual Rear
- Tip Diameter: 2.500 In.
- Single or Dual: Dual
- System Type: Tailpipe
- Outlet Diameter: 2.500 In.
Features:
- Mandrel Bent 16 Gauge 409 Stainless Steel Tubing
- Limited Lifetime Warranty
- 2.50 in Pre Bent Tailpipes
- Exits At Rear Of Vehicle
- Premium Flowmaster Quality
- 1 pair
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge stainless steel tubing for maximum flow, tuck up high in the chassis for good clearance, exits straight-out the back under the rear bumper and includes long polished 304 stainless steel tips. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 842548 (Super 44 Series) or 842553 (50 Series) stainless steel mufflers. Covered by our Lifetime Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

45209/45210

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1987 - Ford Mustang	V	-	8 Cyl 5.0L	LX	302

2 In Stock

$492.69 USD

$591.23 USD

Brand	Flowmaster
Part #	F13815814
Condition	New
Warehouse	B

1987 Ford Mustang Exhaust Tail Pipe 8 Cyl 5.0L Flowmaster

2.5 in. Diameter Sold In Pairs; Includes Hangers; Offset Inlet/Offset Outlet Mufflers Required
Tailpipe Set; 2.5 in. Diameter Sold In Pairs; Includes Hangers; Offset Inlet/Offset Outlet Mufflers Required;
Tailpipe Set
Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 49.000 In.
- Outlet Diameter: 2.500 In.
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- Gray Color
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.