1985 Exhaust Tail Pipe Parts
Choose a Make for your 1985 vehicle
Image
Product
Price
- Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required Use Offset Inlet/Offset Outlet Mufflers Only
- Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exit Position: Dual Rear
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Chevrolet El Camino | V | - | 8 Cyl 5.0L | 305 |
- Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
- Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exit Position: Dual Rear
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Chevrolet El Camino | V | - | 6 Cyl 4.3L | 262 |
- Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
- Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Exit Position: Single Side
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- Gray Color
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Chevrolet C10 | V | - | 8 Cyl 5.0L | 305 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Pipe Offset Left Late-design tail pipe (pipe is offset to the left) will replace the early- design straight pipe used on models through '86 ch#s G2021146, G3015680, and G7024051. Those that prefer the early-design pipe, use #484-755. Either design now uses the late-style hook-type hanger mount first used after the ch#s above. If customer's car still uses the threaded stud-type mount and nuts, bracket #75 38 440 and hanger #93 65 404 will also be required.
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1985 - Saab 900 | Turbocharged |
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1985 - Porsche 911 | Carrera |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Volkswagen Vanagon |
Showing 1 - 6 of 6 products
Loading...