Image
Product
Price
- Lower; 40 Percent Lighter Than OEM; Includes Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 6061-T6 Aluminum; Black Anodized; Set of 2
- Ultra Series Control Arm Set; Lower; 40 Percent Lighter Than OEM; Includes Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 6061-T6 Aluminum; Black Anodized; Set of 2;
- Ultra Series Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Forged 6061-T6 Billet Aluminum
- CNC Machined To A Precise Fit And Finish
- 15% Lighter Than Previous Skunk2 LCAs
- 40% Lighter Than OEM Arms
- 7% Stronger Than Previous Skunk LCAs
- Tuned Durometer Elastomeric Bushings To Damp Out Harshness
- Delrin Shock Bushings For Low Friction w/Minimal Deflection
- Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Alpha Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years and are a must-have for enthusiast looking to fine-tune their suspension for maximum handling performance while keeping budget in mind. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. When deciding on a material to base our new design on, we chose very carefully, as there are many inferior annealed and cheap versions of aluminum available on the market today. We chose 6061-T6 because of its excellent strength to weight ratio. With an ultimate tensile strength of over 42,000 PSI, and fatigue strength of 14,000 psi for 500 million cycles – we knew this would be perfect for the Alpha Series Lower Control Arms. The result of our re-engineered lower control arm is a 6061-T6 Forged Aluminum LCA, that is 15% lighter and 7% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this specific combination of bushings allows the most comfort and control under any driving conditions. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2's Rear Lower Control Arms are both..
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Honda Civic | Rear Lower |
- Front Tender/Main Spring Rate 123 lb-in./260 lb-in.; Rear Tender/Main Spring Rate 156 lb-in./313 lb-in.; Lowers Front/Rear 2.25 in./2.0 in.; Set of 4
- Lowering Coil Spring Set; Front Tender/Main Spring Rate 123 lb-in./260 lb-in.; Rear Tender/Main Spring Rate 156 lb-in./313 lb-in.; Lowers Front/Rear 2.25 in./2.0 in.; Set of 4;
- Lowering Coil Spring Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Front Spring Rate (Tender/Main) 123 lb.-in/260 lb.-in
- Rear Spring Rate (Tender/Main) 156 lb.-in/313 lb.-in
- Drop (Front/Rear) 2.25 in./2.00 in.
- Corner faster, stop quicker, and improve the look of your vehicle with Skunk2s legendary Lowering Springs.Skunk2 Lowering Springs for the '02-'05 Civic Si are designed to dramatically improve handling performance and driver feel through significantly increased cornering grip and reduced body roll. What's more, Skunk2 Lowering Springs also help counteract squatting under acceleration as well as nose-diving while braking. All Skunk2 Lowering Springs are CNC-wound using the highest quality SAE 9254V spring steel, shot-peen stress relieved, and corrosion-protected thanks to powdercoating and specialized phosphate treating processes. The results are a lower center of gravity and race car-like handling, yet smooth, comfortable ride characteristics—the perfect balance between performance and comfort. Skunk2 Lowering Springs are compatible with OEM or aftermarket shock absorbers and look great on vehicles with stock or aftermarket wheels. When applicable, Skunk2 Lowering Springs should be paired with Skunk2 Sport Shocks and other fine Skunk2 suspension components.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2004 - Honda Civic | L | 1998 | 4 Cyl 2.0L | Si | 122 |
- Shorter Shock Body; For Use w/Lowering Springs Or Sleeve Coilovers; Includes Shocks/Bumpstops/Rae Bushings; Requires Re-use Of OEM Components; Set of 4;Front w/1.2-2.3 in. Drop And Rear w/1.2-2.5 in. Drop
- Sport Shock Absorber Kit; Shorter Shock Body; For Use w/Lowering Springs Or Sleeve Coilovers; Includes Shocks/Bumpstops/Rae Bushings; Requires Re-use Of OEM Components; Set of 4;
- Sport Shock Absorber Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Shortened Shock Body
- Super-Finished Hard Chrome Shaft
- Reduced Shaft Stroke For Full Travel On Lowered Vehicles
- Fixed Dampening For Skunk2 Lowering Springs
- Polyurethane Top Hat Bushing For Improved Shock Feedback
- Set Of 4
- Featuring the same engineering practices as the, industry-leading, Pro-C and Pro-S II Coilovers. Skunk2 Racings high-performance, factory-replacement Sport Shocks for the '12-'13 Civic use most of the same technologies and manufacturing processes found in Skunk2's more advanced, full coilover suspension systems. Each Sport Shock's dual-tube design features a hardened, chrome-plated, super-finished shaft and precision valving dialed in by Skunk2's suspension engineers. This design results in exceptional durability, reliability, and smooth operation. Sport Shocks offer an integrated approach to suspension tuning at a cost-effective level. Designed to compliment Skunk2 Lowering Springs or Adjustable Sleeve Coilovers, Sport Shocks feature shortened shock bodies and reduced shaft strokes to help maintain adequate suspension travel on lowered vehicles, improving performance without sacrificing comfort.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Honda Civic | Front and Rear |
Showing 1 - 3 of 3 products
Loading...