Image
Product
Price
- 3" Leaf Spring
- Bushing kit part number J7008 is also required.
- This spring is a 5-leaf pack with anti-friction pads and center leaf spacer plates between each leaf to significantly decrease leaf pack internal friction. This rear XJ leaf spring provides 3" of lift and allows for the max amount of compression travel, which translates to increased wheel travel. Sold Individually, bushings sold separately.
- In the box: 1 Leaf Spring
- Product Attributes:
- Horizontal Position: Rear
- Number of Leafs: 5
- Length: 48-5/8"
- Eye to Center Front: 21.89"
- Width: 2-1/2"
- Rear Eye Diameter: 1.75
- Eye to Eye: 48.63
- Eye to Center Rear: 26.74"
- Overload Spring: No
- Center Pin Size: 0.313
- Front Eye Diameter: 2.5
- Free Height: 6.5
-
Features:
- Anti-friction pads included.
- Center leaf spacer plates between each leaf.
- Improves ride and handling over your old tired factory XJ rear springs.
- Sold Individually, bushings sold separately.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1993 - Jeep Cherokee XJ | 4WD |
- Quicker Disconnect Sway Bar Links
- Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel. Not compatible with aftermarket sway bars.
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- For Use With Lift Heights: 0-4"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 6-5/8 To 9-3/8
- Title: Quicker Disconnect Sway Bar Links
-
Features:
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 1987 - Jeep Cherokee XJ |
- Quicker Disconnect Sway Bar Links
- Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs. JKS Quicker Disconnect sway bar end links fits various models and lift heights. See list below
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderately Easy
- Is Adjustable: Yes
- Length: 8 To 11-5/8
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
-
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Jeep Cherokee XJ |
- Control Arm Skid Plate
- These MiniSkids are specifically designed for the front axle of the Jeep JK and will work with both factory and aftermarket control arms. Using heavy-duty 1/4" steel plate construction, the low-profile design allows you to add protection for your lower control arms with the added benefit of a significant strength upgrade to the factory bracket design.
- Product Attributes:
- Welding Required: Yes
- Metal Cutting Required: No
-
Features:
- Prevents misalignment of adjustment cam bolts to ensure reliable caster settings.
- Spans OE bracket to form a much stronger boxed structure.
- Ultra-protective design utilizes thick 1/4" plate steel construction that is folded for extra rigidity and proper clearance.
- Protect your truck or Jeep off road with Zone skid plates built for lift kits and control arm protection. Zone Offroad skid plates are built from high strength steel and designed to protect versus impact from rocks and debris. The underbody and engine of your Truck or Jeep are the most vulnerable when driving off road and adding a Zone skid plate will prevent damage. Front skid plates are designed to be installed with Zone Offroad lift kit suspension systems for maximum safety and protection of your vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Jeep Cherokee XJ |
- Adjustable Front Track Bar
- Suggested Starting Length - 33" Min. Adjusted Length - 32.91" Max Adjusted Length - 35.91" *See Instructions for further details. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference. Not compatible with right hand drive vehicles.
- Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
- In the box: Bushings Jam Nut Track Bar
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.91
- For Use With Lift Heights: Over 4"
- Installation Time: 2-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 35.91
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 33.00
-
Features:
- Fits vehicles with more than 4" Lift
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Jeep Cherokee XJ |
- Adjustable Front Track Bar
- Suggested Starting Length - 32" Min. Adjusted Length - 30.2" Max Adjusted Length - 33.2" *See Instructions for further details. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference. Not compatible with right hand drive vehicles.
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
- In the box: Bushings Jam Nut Track Bar
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 30.20
- For Use With Lift Heights: 1-3.5"
- Installation Time: 2-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 33.20
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 32.00
-
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - Jeep Cherokee XJ |
- HD Leaf Spring Shackle
- Installation on Wagoneer SJ models require minor product modification.
- Lift your Jeep Cherokee XJ, MJ or Wagoneer SJ approximately +1? with JKS heavy duty leaf spring shackles. The boomerang-style design optimizes travel with full compression and extension while making room for larger tires. Greaseable Dura-Thane bushings provide smooth, quiet operation while preventing bind and bushing fatigue common. Heavy duty construction with durable powder coat finish. Fits: Jeep XJ, MJ rear leaf spring eyes and SJ front leaf spring eyes. Sold in pairs.
- In the box: Lift Shackles
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Horizontal Position: Front Or Rear
- Title: Hd Leaf Spring Shackle
- Width: N/a
- Height: 1-1/2"
-
Features:
- Boomerang style shackle optimizes rear suspension travel by allowing full compression and extension of leaf springs
- Extended length increases rear ride height 1 in. for improved tire clearance
- Greaseable Dura-Thane chassis bushing is included for smooth, quiet operation and easy lubrication
- Rigid design prevents binding and bushing fatigue commonly associated with OE and inferior shackle designs
- Heavy duty construction ensures correct operation of springs and bushings under severe off-road conditions
- Durable powder coat finish provides long-lasting protection
- Lift your Jeep Cherokee XJ, MJ or Wagoneer SJ approximately +1” with JKS heavy duty leaf spring shackles. The boomerang-style design optimizes travel with full compression and extension while making room for larger tires. Greaseable Dura-Thane bushings provide smooth, quiet operation while preventing bind and bushing fatigue common. Heavy duty construction with durable powder coat finish. Fits: Jeep XJ, MJ rear leaf spring eyes and SJ front leaf spring eyes. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 1990 - Jeep Cherokee XJ |
Showing 1 - 7 of 7 products
Loading...