These replacement pressure sensors and included 1/4 in. adapter bushings are designed specifically for use with AutoMeter short sweep electric air core gauges.
Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made
need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
SENSOR; OIL PRESSURE; 0-100PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.
SENSOR; OIL PRESSURE; 0-100 PSI; 1/8in. NPT MALE; FOR SHORT SWEEP ELEC.
General
Thread Size
1/8npt
Dimensions
4.000 In. X 1.500 In. X 1.500 In.
Pressure
100 Psi
Connector Gender
Male
Voltage
12 V
Temperature
N/a
WARNING CA Proposition 65
Yes
WARNING CA Proposition 65 Message
Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
Attachment Method
Screw-in
Packaging
length
2.00
width
5.75
height
7.75
weight
0.41
Information on technical characteristics, the delivery set, the country of manufacture and the appearance
of the goods is for reference only and is based on the latest information available at the time of publication.
Rick
17 Apr, 2014
The sensor works great but you need to be aware of a possible grounding issue. If you use Teflon tape the sensor my not ground with the oil housing and the gauge will not work. So be sure to use Teflon paste in stead or you will need to run a jumper wire from the sensor housing (I used a hose clamp to hold the wire to the housing of the sensor) then to a known ground.
William R Goodridge
18 Dec, 2013
sent in timely fashion, as described. Bought to replace original unit that had failed. Too much of a description needed for this post, I can understand why people don't want to do the reveiws
Johann
21 Jan, 2013
Works as advertised. Tested all the way up to 80 PSI and functions as it should. Please note this unit is registered to 100 PSI.