Image
Product
Price
- Oil Filter
- H-4.0 in.; OD-3.656 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 Special Thread X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04884899AB, 04884899AC, 05038041AA, 51372, 872025, 89017527, B329, F1AZ6714A, F1AZ6731BD, FL820, FL820S, L24651, M1210, M1210A, OD5419, PF1250, PH2, PH8A...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chevrolet Silverado 5500 HD |
- Solo Kits Are Replacements To Factory Bump Stops; Capacity 2800 lbs. At 50 Percent Compression; Do Not Exceed GVWR
- SumoSprings; Solo Kits Are Replacements To Factory Bump Stops; Capacity 2800 lbs. At 50 Percent Compression; Do Not Exceed GVWR;
- SumoSprings
- Product Attributes:
- Max Load: 2800 Lbs.
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Enhances Load Carrying Ability
- 2800 Pounds Capacity At 50 Percent Compression
- Reduces And Stabilizes Sway
- Improves Overall Driver Control And Ride Comfort
- Compress Up To 80 Pct Original Height With Full Memory Rebound
- 1 Pc. Attached On Top/Bottom Will Stretch 50 Pct Of Body Height
- Progressive Spring Rate
- Made From Proprietary And Patented Microcellular Urethane
- Worlds Only Leak Proof Air Spring
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- SumoSprings are a patented suspension product designed to enhance load carrying ability, stabilize sway, and improve overall driver control and comfort. SumoSprings are manufactured in a variety of heights, diameters and densities to support multiple front and rear applications. All SumoSprings are manufactured from proprietary closed microcellular urethane designed to suit numerous applications. SumoSprings Compress up to 80% of original height with full memory rebound and stretch 50% of their height. They are maintenance free, do not leak air, and do not require airlines or compressors.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Chevrolet Silverado 5500 HD | Front |
- Rear; Self-Adjusting Suspension Stabilizing System; Provides 1400 lbs Additional Load Leveling Ability; Do Not Exceed GVWR
- SuperSprings; Rear; Self-Adjusting Suspension Stabilizing System; Provides 1400 lbs Additional Load Leveling Ability; Do Not Exceed GVWR;
- SuperSprings
-
Features:
- Sold As Individual Item
- Requires No Maintenance
- Self Adjusting Suspension Stabilizing System
- 1400 Lbs. Additional Load-Leveling Ability
- Reduces Body Roll Up To 30 Pct Without Compromising Ride Quality
- Works In Conjunction w/Original Equipment Leaf Spring Assembly
- Adjustable Shackles Allow Installation To Suit Various Needs
- Typical Installation Completed In Approximately One Hour
- SAE 5160H 51 Pct Alloy/60 Pct Carbon High Grade Steel
- Shot Peened To Relieve Spring Stress And Extend Product Life
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- SuperSprings(R) are a unique and patented self-adjusting suspension stabilizing system for vehicles with rear leaf springs, designed to level loads and reduce body roll. SuperSprings(R) provide users extra load support and reduce body roll without compromising ride quality. They are manufactured using a variety of different sized springs to support multiple applications. All SuperSprings(R) are manufactured in the U.S.A. from SAE5160H high grade, shot peened steel.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chevrolet Silverado 5500 HD |
- Weight Capacity 15000 lbs.
- Suspension Enhancement System; Weight Capacity 15000 lbs.; Rear;
- Suspension Enhancement System
- Product Attributes:
- Usage: Medium Duty Truck
- Axle Style: Single
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Chevrolet Silverado 5500 HD | Rear |
- TOOLBOX LATCH GM CENTER CUT
- The BOLT Toolbox Latch Retrofit Kit allows you to easily replace the existing toolbox latch with an OEM stainless steel latch and the BOLT Lock that works with your truck key. Works with center cut Chevy, GMC, Buick and Cadillac Keys.
- BOLT Truck Tool Box Lock and Key
- Product Attributes:
- Title: Bolt Toolbox Latch Gm Center Cut
- Opens with your vehicle ignition key. Eliminates extra keys on your ring. Plate tumbler sidebar to prevent picking and bumping. Weather resistant stainless steel latch. Limited Lifetime Warranty
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chevrolet Silverado 5500 HD |
- 1/2IN. RECEIVER LOCK GM CENTER CUT
- The BOLT 1/2" Receiver Lock lets you conveniently secure your hitch with your vehicle ignition key! Suitable for class 1-2 towing applications and fits 1-1/4" receivers. Works with center cut Chevy, GMC, Buick and Cadillac Keys.
- BOLT Trailer Hitch Lock
- Product Attributes:
- Title: Bolt 1/2in. Receiver Lock Gm Center Cut
- The only receiver lock that will open with YOUR CHRYSLER, DODGE, or JEEP key, BOLT Receiver Locks feature a solid zinc core, automotive grade cylinder with patented 6 plate-tumbler sidebar to prevent picking and bumping, a stainless steel lock shutter to keep out dirt and moisture, and a rugged jacket and cap.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chevrolet Silverado 5500 HD |
- 5/8IN. RECEIVER LOCK GM CENTER CUT
- The BOLT 5/8" Receiver Lock lets you conveniently secure your hitch with your vehicle ignition key! Suitable for class 3-5 towing applications and fits both 2 and 2.5" receivers. Works with center cut Chevy, GMC, Buick and Cadillac Keys.
- BOLT Trailer Hitch Lock
- Product Attributes:
- Title: Bolt 5/8in. Receiver Lock Gm Center Cut
- The only receiver lock that will open with YOUR CHRYSLER, DODGE, or JEEP key, BOLT Receiver Locks feature a solid zinc core, automotive grade cylinder with patented 6 plate-tumbler sidebar to prevent picking and bumping, a stainless steel lock shutter to keep out dirt and moisture, and a rugged jacket and cap.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chevrolet Silverado 5500 HD |
- COUPLER PIN LOCK GM CENTER CUT
- The BOLT Coupler Pin Lock allows you to secure your trailer with your vehicle ignition key! Adjustable from 1/2" to 3-3/8" the Coupler Pin Lock fits virtually any coupler. Works with center cut Chevy, GMC, Buick and Cadillac Keys.
- BOLT Trailer Hitch Lock
- Product Attributes:
- Title: Bolt Coupler Pin Lock Gm Center Cut
- Opens with your vehicle ignition key. Fits couplers from 1/2 in. to 3 3/8 In. and any size in between. Stainless steel pin. Lock slides back and forth along pin for ease of use. 1/8 in. incremental adjustments allows for a snug fit. Weather proof. Plate tumbler sidebar to prevent picking and bumping. Stainless steel lock shutter to keep out dirt and moisture. Limited lifetime warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chevrolet Silverado 5500 HD |
- OFF-VEHICLE COUPLER LOCK GM CENTER CUT
- The BOLT Off-Vehicle Coupler Lock lets you conveniently secure your unattended trailer with your vehicle ignition key! Suitable for 1-7/8", 2", and 2-5/16" couplers. Works with GM Center Cut Keys.
- BOLT Trailer Hitch Lock
- Product Attributes:
- Title: Bolt Off-vehicle Coupler Lock Gm Center Cut
- Secure unattended trailers with the BOLT Off-Vehicle Coupler Lock with your vehicle ignition key. The BOLT Off Vehicle Coupler Lock provides a visible theft deterrent and maximum security for unattended trailers, all in one convenient system. Designed to fit a wide range of couplers. Powder-coated finish provides durable, and weather resistant security to protect your valuables for years!
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chevrolet Silverado 5500 HD |
- LOCK CYLINDER GM CENTER CUT
- The BOLT Replacement Lock Cylinder works with your vehicle ignition key. BOLT Replacement Cylinder is designed to easily replace the existing cylinders in your BOLT Toolbox Latch. Works with center cut Chevy, GMC, Buick and Cadillac Keys.
- BOLT Accessory Lock Core
- Product Attributes:
- Title: Bolt Lock Cylinder Gm Center Cut
- 6 Plate tumbler sidebar prevents picking and bumping. Automotive grade stainless steel lock shutter keeps out weather and debris.
Additional Fitment Information:
| Vehicle |
|---|
| 2022 - Chevrolet Silverado 5500 HD |
Showing 1 - 10 of 45 products
Loading...