Billet Aluminum Construction For Durability and Good Looks
10AN O-Ring Inlet/Outlet For High Flow and Superior Sealing
Excellent For Use With Carbureted Or EFI Applications
Fully Submersible In Tank
Compatible With 12V To 18.5V Systems For Street Or Race Use
Compact For Easy Installation On Frame Rails Or Other Tight Areas
Twin Pump Design Allows The Use Of Both Pumps
Patent Pending Dual Pump Technology
Proven Durability Beyond 3000 Hours In Gasoline Or Diesel Fuels
Weighs Only 5.1 lbs..
Current Draw At 43 PSI and 13.5 Vdc Is 17.2 Amps
Need to feed some serious horsepower? Have a nitrous or forced induction powerplant that also sees street duty? Holleys Dominator(TM); in-line fuel pumps are the answer! The patent pending twin pump design allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost! By staging the second pump, you eliminate the unnecessary recirculating and heating of extra fuel which can lead to poor performance and hot fuel issues. For hard core race vehicles, both pumps can be wired for full time duty to get maximum performance and are proven with 18.5 volt compatibility at pressures up to 80 psi. At only 5.1 lbs., they weigh half a pound less than competitive 1000+ horsepower pumps yet have twice the features!
Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made
need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Dominator In-Line Billet Fuel Pump; Free Flow GPH 200; Free Flow LPH 757; EFI; 10 AN O-Ring - 78-14 SAE Inlet/Outlet; Supports Up To 1800 EFI Or 2100 Carb HP;
General
GPH@43PSI
156
LPH@8PSI
720
Forced Induction HP@43PSI
1400
LPH@60PSI
590
Naturally Aspirated HP@60PSI
1600
WARNING CA Proposition 65
Yes
Fuel Type
Diesel
E85
Gasoline
Naturally Aspirated HP@43PSI
1800
Outlet Size
10an O-ring - 0.875 In. - 14 Sae
WARNING CA Proposition 65 Message
Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
GPH@8PSI
200
Free Flow GPH
200
Forced Induction HP@60PSI
1200
LPH@43PSI
530
GPH@60PSI
140
Housing Color
Black Anodized
Naturally Aspirated HP@8PSI
2100
Fuel System Type
Carbureted
Efi
Body Color
Black Anodized
Forced Induction HP@8PSI
1600
Packaging
length
11.25
width
7.00
height
3.00
weight
6.01
Information on technical characteristics, the delivery set, the country of manufacture and the appearance
of the goods is for reference only and is based on the latest information available at the time of publication.
MK
22 Oct, 2014
Used as aux pump to pump gas from gas can stores to vehicles and this pump is quiet, runs cool, and very good flow. Empty 5 gal jug in 4-5 minutes.
rcrios
18 Oct, 2014
Other than being lost in transit for a few days pump appears to be in great shape .
Shawn C
19 May, 2014
Purchased this fuel pump to put on a Malibu Sunsetter Carb engine. Now it is easier to start the engine and seems to respond to the throttle a little better.
Paul
15 Feb, 2014
Ordered this for a Chevy diesel to gas 5.7 TBI conversion and received quickly and is a nice heavy unit. Hooked up to replace lift pump and is working fine. Depending on where and how you mount this it can be a little loud but just need to think about that before mounting. Will buy again for the next upcoming project
Edward W., Homer
19 Oct, 2009
The Holley marine fuel pump was as adverticed, and the delivery was excerlent, would use AutoPartsWAY again.