1999 Mazda Parts

Choose a Model for your 1999 Mazda


Showing 1 - 10 of 4601 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.50in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Gasket Included: No
    • Outlet Gasket Included: Yes
    • Inlet Diameter: 2.5
    • MFWeb: Yes
    • Heat Shield Attached: Yes
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Oval
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Outlet Diameter: 2.5

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1999 - Mazda B3000 V 2986 Rear 6 Cyl 3.0L 182

CURT
  • Class 3 Hitch; 2in.; Select Mazda B-Series; Ford Ranger (Drilling Required)
  • 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
  • CURT 13019 Class 3 Trailer Hitch; 2-Inch Receiver; Drilling Required; Fits Select Mazda B2300; B3000; B4000; Ford Ranger
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 4000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 4000
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • WD Tongue Weight: 600
    • Drilling Required: No
    • Install Time: 30 Minutes
    • WC Tongue Weight: 400
    • Weight Distribution: 6000
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Mazda B2300, B3000, B4000 and Ford Ranger (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1999 - Mazda B4000 V - Rear 6 Cyl 4.0L 245

Husky Liners
  • 2nd Or 3rd Seat Floor Mats
  • Black; 2 pc.; Does Not Cover Hump May Require Trimming For Correct Fit/Trim Guides Molded In Mat
  • HD 2ND OR 3RD SEAT FLOOR MATS
  • Heavy Duty Floor Mat
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position Doors Body
1999 - Mazda B4000 Rear 2 Extended Cab Pickup

K&N
  • Universal Clamp-On Air Filter
  • Round Tapered; OD-4.5 in./7.5 in.; Flange L-5/8; Inside Flange 6 in; Centered; Chrome End; Filter Length 6 in. Replacement Filter For Performance Intake Kit [PN57-2527]
  • Regardless of the angle or offset diameter of an air intake; there is probably a K/N Universal air filter for your equipment. K/N universal air filters are washable and reusable.
  • Universal Air Cleaner Assembly
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Flange Length: 0.625 In. (16mm)
    • Flange Offset: 0.000 In. (0mm)
    • WARNING CA Proposition 65: Yes
    • Base Outside Diameter: 7.500 In. (191mm)
    • Item Weight: 1.400 Lbs. (0.6 Kg)
    • Machine Washable: Yes
    • Product Box Height: 8.600 In. (218mm)
    • Filter Material: Cotton Gauze
    • Product Box Width: 8.300 In. (211mm)
    • Product Box Length: 8.400 In. (213mm)
    • Air Filter Large End Diameter: 7.500 In. (191mm)
    • Item Height: 6.000 In. (152mm)
    • Prop 65 (C, R or CR): Cr
    • Number of Flanges: 1
    • Package Content: 1
    • Top Style: Metal
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Package Contents: 1 Air Filter
    • Top Material: Chrome
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Flange Angle: 0 Degree
    • CARB/Air Horn Diameter: 6.000 In.
    • Package Quantity: 1
    • Shape: Round Tapered
    • Top Outside Diameter: 4.500 In. (114mm)
    • Package Material: Paperboard
    • Frame Design: Flexible
    • Filter Re-Oiling Amount: 1.27 Oz (38 Ml)
    • Flange Inside Diameter: 6.000 In. (152mm)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Flange Type: Centered
    • Package Type: Box
  • Features:
    • Designed To Increase Horsepower And Acceleration
    • High Air Flow With Excellent Filtration
    • Clamp-On Washable and Reusable Air Filter
    • Malleable Flanges
    • One Year Limited Warranty
  • K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Mazda B4000 V - 6 Cyl 4.0L 245

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Mazda Protege L 1839 4 Cyl 1.8L -

K&N
  • Oil Filter
  • H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M20 X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.2 Kg)
    • Product Box Height: 3.630 In. (92mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.160 In. (80 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.160 In. (80mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 2.875 In. (73mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Mazda 626 V 2497 6 Cyl 2.5L -

Husky Liners
  • Front Floor Mats
  • Black; 2 pc. May Require Trimming For Correct Fit/Trim Guides Molded In Mat
  • HD FRONT FLOOR MATS
  • Heavy Duty Floor Mat
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position
1999 - Mazda Millenia Front

Husky Liners
  • Front Floor Mats
  • Black; 2 piece
  • HD FRONT FLOOR MATS
  • Heavy Duty Floor Mat
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position
1999 - Mazda 626 Front

K&N
  • Oil Filter
  • H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 0.600 Lbs. (0.3 Kg)
    • Product Box Height: 4.130 In. (105mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 2.810 In. (71 Mm)
    • Package Material: Paperboard
    • Product Box Length: 2.880 In. (73mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 2.688 In. (68mm)
    • Removal Nut: Yes
    • Item Height: 3.750 In. (95mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
0410755, 0410769, 0410789, 0410797, 0410812, 0418064, 0418075, 0418076, 0418135, 0986452036, 102827901, 1041426, 1041427, 11715829, 11715849, 120137, 120722, 122497...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1999 - Mazda Millenia V 2497 6 Cyl 2.5L -

Husky Liners
  • Center Hump Floor Mat
  • Black; Universal; For Use w/o Shifter Or Console May Require Trimming For Correct Fit/Trim Guides Molded In Mat
  • HD CENTER HUMP FLOOR LINER
  • Heavy Duty Floor Mat Center Hump
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Style: Not Molded
  • Features:
    • Guaranteed Not To Crack Or Break
    • 0.3750 in. High Ridges
    • Up To 40 percent Taller Ridges
    • Extra Thick Driver Heal Pad
    • Nibs On Back-Prevent Slippage
    • Easily Cleaned
    • Made In USA
    • Year Round Protection
  • Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.

Additional Fitment Information:
Vehicle Position
1999 - Mazda B4000 Floor Hump
Showing 1 - 10 of 4601 products

Loading...