Image
Product
Price
- Propeller Shaft CV Joint Kit
- Propeller Shaft
- Product Attributes:
- Package Contents: 1 Drive Shaft Cv Joint; Boot Clamp; Snap Ring
- Bolt Circle Diameter: 3.38 In
- Spline Diameter (In): 1.009 In
- Item Grade:
- Regular
- Standard Replacement
- Mounting Hole Quantity: 6
- Installation Hardware Included: Yes
- Spline Quantity: 25
- Spline Length (In): 0.903 In
- Boot Color: Natural
- Grease Included: Yes
- Bolt Thread Sizes: M8 X 1.25 Mm
- Housing Outside Diameter (in): 3.931 In
- Bolt Diameter: 0.334 In
- Housing Thickness (in): 1.18 In
-
Features:
- Direct replacement - this drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles
- Restores functionality - reliable replacement for an original part that has failed due to collision damage, water infiltration or road debris contamination
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
52105728AD, 52105758AD, P52853431AA, P52853432AA, SK932303
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2007 - Mitsubishi Raider | Front | 4WD |
- Wheel Hub - Front
- Product Attributes:
- Lug Pattern: 5
- Package Contents:
- 1 Wheel Hub
- Wheel Hub
- Hub Pilot Diameter: 1.08
- Wheel Pilot Diameter: 3.27
- Hub Material: Steel
-
Features:
- Ideal replacement - this wheel hub is a direct replacement for the original equipment hub to ensure proper performance
- Durable construction - this part is made of quality materials for a long service life
- Cost-effective solution - offers original equipment quality at a competitive price
- Quality assured - this wheel hub has undergone dimensional checks and materials and hardness testing to ensure quality standards
- This wheel hub is a direct replacement for the original equipment hub. It has undergone rigorous testing to ensure a proper fit and reliable performance over a long service life.
This Part Fits the Following OEM/Substitute Numbers:
3880A018, SK930005
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Mitsubishi Outlander | Front Left |
- Wheel Hub - Front
- Product Attributes:
- Lug Pattern: 5
- Package Contents:
- 1 Wheel Hub
- Wheel Hub
- Hub Pilot Diameter: 1.08
- Wheel Pilot Diameter: 3.27
- Hub Material: Steel
-
Features:
- Ideal replacement - this wheel hub is a direct replacement for the original equipment hub to ensure proper performance
- Durable construction - this part is made of quality materials for a long service life
- Cost-effective solution - offers original equipment quality at a competitive price
- Quality assured - this wheel hub has undergone dimensional checks and materials and hardness testing to ensure quality standards
- This wheel hub is a direct replacement for the original equipment hub. It has undergone rigorous testing to ensure a proper fit and reliable performance over a long service life.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Mitsubishi Outlander | Front Right |
- New CV Axle Shaft
- New CV Axle Shaft
- CV Axle Shaft
- Product Attributes:
- Outboard Bolt Head Size (mm): N/a
- Axle Nut Height (in): 6/7
- Axle Bolt Hex Size (mm): N/a
- Axle Nut Head Type: Hex
- Number Of Inboard Joint Bolt Holes: N/a
- Outboard Bolt Length (mm): N/a
- Outboard Bolt Head Type: N/a
- Axle Nut Hex Size (mm): 32
- Inboard Shaft Connection Style: Male
- Inboard Bolt Length (in): N/a
- Axle Nut Thread Size: M22*1.5
- Axle Bolt Thread Size: N/a
- Number Of Outboard Joint Bolt Holes: N/a
- Axle Nut Length (mm): 37
- Axle Nut Locking Type: Cotter Pin
- Boot Material: Neoprene
- Inboard Bolt Head Size (in): N/a
- Number Of Inboard Shaft Bolts: N/a
- Outboard Bolt Head Size (in): N/a
- Inboard Joint Type: Male
- Overall Compressed Length (in): 25.1
- Abs Ring Type: N/a
- Axle Nut Hex Size (in): 1 1/4
- Number Of Inboard Splines: 30
- Number Of Outboard Shaft Bolts: N/a
- Outboard Joint Bolt Thread Size: N/a
- Outboard Bolt Length (in): N/a
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Inboard Bolt Head Size (mm): N/a
- Number Of Outboard Splines: 28
- Axle Bolt Length (mm): N/a
- Inboard Bolt Length (mm): N/a
- Outboard Shaft Connection Style: Conventional
- Inboard Bolt Head Type: N/a
- Axle Nut Length (in): 1 1/2
- Overall Compressed Length (mm): 637.5
- Inboard Bolt Thread Size: N/a
- Limited Lifetime Warranty. ABS axles fit non-ABS applications unless otherwise noted. ISO 9001:1007 and TS 16949:2009 Certified Company
This Part Fits the Following OEM/Substitute Numbers:
14606N, 239209, 3815A137, 40737144, 89569, 959408, 9783N, MI-2855, MI-8-8604, MI-8209, MI10521E
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2007 - Mitsubishi Outlander | Front Left | FWD |
- Greaseable Super Strength Universal Joint
- with Lube Fitting in Body Greasable Super Strength U-Joint with Lube Fitting in Body
- MOOG Greaseable Super Strength 280 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2154153, 45U0111
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2007 - Mitsubishi Raider | Front Driveshaft at Front Axle | 4WD |
- Greaseable Super Strength Universal Joint
- with 2 Joint Driveshaft 1.063 (in) Bearing Caps Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 270 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.62
- 91.9
- Length A - Inch: 3.62
- OE Series: Spicer 1330
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.62
- Length B - mm: 91.9
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
215-0354, 45U0115
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2007 - Mitsubishi Raider | At Rear Axle | RWD |
- Non-Greaseable Super Strength Universal Joint
- with 3 Joint Driveshaft 1.063 (in) Bearing Caps Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 254 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.62
- 91.9
- Length A - Inch: 3.62
- OE Series: Spicer 1330
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.62
- Length B - mm: 91.9
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
20064P, 45U0141, U1203HP
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2007 - Mitsubishi Raider | At Rear Axle | RWD |
- Front Axle Shaft
- Product Attributes:
- Differential Case Design Type: Ifs
- Axle Shaft Seal Included: No
- Compressed Length: 6.26 In
- Package Contents: Axle Shaft
- Hub Bearing Included: No
- Wheel Bolt Pattern Size: 6x114
- Length: 6.26 In
- Inboard Spline Quantity: 29
- Wheel Stud Thread Diameter: 0.562
- ABS Tone Ring Included: No
- Brake Dust Shield Included: No
- Rust Resistant Coating: No
- Outboard Spline Quantity: 29
- Brake Hardware Included: No
- Adjustable: No
- Wheel Stud Thread Pitch: 18
- Wheel Studs Included: No
- Brake Backing Plate Included: No
- Shaft Diameter: 1.2
-
Features:
- Direct replacement - this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models
- Ready to install - comes pre-assembled for simple installation with no further assembly required
- Durable construction - designed to rigorous standards and tested to ensure performance
- Trustworthy solution - backed by team of engineers and quality control specialists in the United States
- Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box.
This Part Fits the Following OEM/Substitute Numbers:
52069887AE, AXK416, C8.0FAX-002
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2007 - Mitsubishi Raider | Front Left Inner | 4WD |
- Differential Cover Gasket
- with 10 Bolt Holes with 8.25in Ring Gear ; Chrysler
- FEL-PRO RDS 55047 Differential Cover Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
2852922, 36012, 4049689, DS14211, DT007, P18564, P18564TC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Mitsubishi Raider | Rear |
- Front Axle Shaft
- Includes Bearing
- Product Attributes:
- Differential Case Design Type: Ifs
- Axle Shaft Seal Included: No
- Compressed Length: 19.27 In
- Package Contents: Axle Shaft
- Hub Bearing Included: No
- Wheel Bolt Pattern Size: 6x114
- Length: 19.27 In
- Inboard Spline Quantity: 29
- Wheel Stud Thread Diameter: 0.562
- ABS Tone Ring Included: No
- Brake Dust Shield Included: No
- Rust Resistant Coating: No
- Outboard Spline Quantity: 29
- Brake Hardware Included: No
- Adjustable: No
- Wheel Stud Thread Pitch: 18
- Wheel Studs Included: No
- Brake Backing Plate Included: No
- Shaft Diameter: 1.26
-
Features:
- Direct replacement - this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models
- Ready to install - comes pre-assembled for simple installation with no further assembly required
- Durable construction - designed to rigorous standards and tested to ensure performance
- Trustworthy solution - backed by team of engineers and quality control specialists in the United States
- Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box.
This Part Fits the Following OEM/Substitute Numbers:
52069886AE, AXK415, AXK822, C8.0FAX-001
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2007 - Mitsubishi Raider | Front Right Inner | 4WD |
Showing 1 - 10 of 345 products
Loading...