Image
Product
Price
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K9513 Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Maximum Outside Diameter: 1.630
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: No
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-55001, 101-4105, 104141, 20206AJ000, 21067-GA050, 255001, 260-1402, 32005903, 45D2183, 46D2183A, 505-1183, 505-1183B, 539-031, 610.47002, 61147002, 801-31151, B9513, FA2067...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Subaru XT | H | 2672 | Front Lower | 6 Cyl 2.7L | - |
- Ball Joint
- MOOG K9513 Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Maximum Outside Diameter: 1.630
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: No
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Subaru XT | H | 2672 | Front Lower | 6 Cyl 2.7L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1988 - Subaru XT | Front Lower | XT6 |
- 5 Door Wagon - AK5, AN5
- This kit may be either early-style 1-piece or new updated OE-Style 2 piece.
- with Bump Stop
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1988 - Subaru GL | Rear | Base | 4WD |
- 5 Door Wagon - Excludes Air Suspension - AK5, AN5
- This kit may be either early-style 1-piece or new updated OE-Style 2 piece.
- with Bump Stop
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1988 - Subaru GL | Rear | Turbo |
- This kit may be either early-style 1-piece or new updated OE-Style 2 piece.
- with Bump Stop
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1988 - Subaru GL-10 | Rear | FWD |
- 4 Door Sedan AC5
- This kit may be either early-style 1-piece or new updated OE-Style 2 piece.
- with Bump Stop
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1988 - Subaru GL | Rear | Base | 4WD |
- 4 Door Sedan - Excludes Air Suspension AC5
- This kit may be either early-style 1-piece or new updated OE-Style 2 piece.
- with Bump Stop
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1988 - Subaru GL | Rear | Turbo |
- Excludes Air Suspension
- This kit may be either early-style 1-piece or new updated OE-Style 2 piece.
- with Bump Stop
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Subaru XT | Rear |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 37.9 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Washer; 1 Bolt
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: No
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 12
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Polymer
- Mounting Type: Pinch Bolt
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1014105, 20206AJ000, 45D2183, 610.47002, FA2067, GK9513, JBJ212, K-9513, K9513, MK9513, SB-6642, SK9513, TC959
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1988 - Subaru XT | Front Lower | XT6 |
Showing 1 - 10 of 21 products
Loading...