Dodge Magnum Parts

Choose a Year for your Dodge Magnum


Showing 1 - 10 of 3797 products
Image
SKU
Product
Rating
Price

EBC Brakes
  • FMSI Pad No. D1053; Pad Dimensions: 110 x 69 x 14mm
  • Redstuff Ceramic Low Dust Brake Pads; FMSI Pad No. D1053; Pad Dimensions: 110 x 69 x 14mm;
  • Redstuff Ceramic Low Dust Brake Pads
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Caliper Type: Oem
  • Features:
    • Lowest Dust Pad In Range
    • High Friction Low Heat Fade
    • Great For Fast Street And Premium Sedan
    • Ideal European Vehicle Brake Upgrade
  • There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
  • They are sold as a set and only quantity 1 is required for both wheels

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2006 - Dodge Magnum V 6059 Rear 8 Cyl 6.1L SRT8 370

K&N
  • Performance Air Intake System
  • Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 21.09 HP At 5216 RPM;CARB E.O. D-269-58 57 Series - High Density Polyethylene Tube w/Heat Shield
  • K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
  • Filtercharger Injection Performance Kit
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Air Filter Height: 6.500 In. (165mm)
    • Clamp Style: Regular
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 21.09 Hp @ 5216 Rpm
    • TUV Approved (Europe): No
    • Replacement Filter: Ru-1042
    • Item Weight: 10.400 Lbs. (4.7 Kg)
    • RPM: 5216
    • Product Box Height: 12.500 In. (318mm)
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Product Box Width: 18.250 In. (464 Mm)
    • Air Filter Outlet Length: 6.000 In. (152mm)
    • Product Box Length: 18.250 In. (464mm)
    • Clamp Quantity: 6
    • Air Filter Large End Diameter: 7.500 In. (191mm)
    • Intake Pipe Color: Black
    • Clamp Color: Natural
    • Clamp Material: Stainless Steel
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: High-density Cross-linked Polyethylene
    • Air Filter Outlet Width: 6.000 In. (152mm)
    • Horse Power Increase: 21 Hp
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Paperboard
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Alternate Replacement Filter: Rf-1042
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: Yes
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Washable And Reusable Lifetime Air Filter
    • Easy To Install Usually In 90 Minutes or Less
    • Replaces Entire Factory Air Intake System
    • K&N Million Mile Limited Warranty
  • A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - Dodge Magnum V 6059 8 Cyl 6.1L SRT8 370

K&N
  • Universal Clamp-On Air Filter
  • Round Tapered; OD-4.5 in./7.5 in.; Flange L-5/8; Inside Flange 6 in; Centered; Chrome End; Filter Length 6 in. Replacement Filter For Performance Intake Kit [PN57-1543]~Replacement Filter For Performance Intake Kit [PN57-1544]
  • Regardless of the angle or offset diameter of an air intake; there is probably a K/N Universal air filter for your equipment. K/N universal air filters are washable and reusable.
  • Universal Air Cleaner Assembly
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Flange Length: 0.625 In. (16mm)
    • Flange Offset: 0.000 In. (0mm)
    • WARNING CA Proposition 65: Yes
    • Base Outside Diameter: 7.500 In. (191mm)
    • Item Weight: 1.400 Lbs. (0.6 Kg)
    • Machine Washable: Yes
    • Product Box Height: 8.600 In. (218mm)
    • Filter Material: Cotton Gauze
    • Product Box Width: 8.300 In. (211mm)
    • Product Box Length: 8.400 In. (213mm)
    • Air Filter Large End Diameter: 7.500 In. (191mm)
    • Item Height: 6.000 In. (152mm)
    • Prop 65 (C, R or CR): Cr
    • Number of Flanges: 1
    • Package Content: 1
    • Top Style: Metal
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Package Contents: 1 Air Filter
    • Top Material: Chrome
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Flange Angle: 0 Degree
    • CARB/Air Horn Diameter: 6.000 In.
    • Package Quantity: 1
    • Shape: Round Tapered
    • Top Outside Diameter: 4.500 In. (114mm)
    • Package Material: Paperboard
    • Frame Design: Flexible
    • Filter Re-Oiling Amount: 1.27 Oz (38 Ml)
    • Flange Inside Diameter: 6.000 In. (152mm)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Flange Type: Centered
    • Package Type: Box
  • Features:
    • Designed To Increase Horsepower And Acceleration
    • High Air Flow With Excellent Filtration
    • Clamp-On Washable and Reusable Air Filter
    • Malleable Flanges
    • One Year Limited Warranty
  • K&N's Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2007 - Dodge Magnum V 2736 6 Cyl 2.7L SE 167

K&N
  • Oil Filter
  • H-4.0 in.; OD-3.656 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut~22mm Thread
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M22 Special Thread X 1.500 In.
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 1.200 Lbs. (0.5 Kg)
    • Product Box Height: 4.500 In. (114mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.880 In. (98mm)
    • Package Material: Paperboard
    • Product Box Length: 3.880 In. (98mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.656 In. (93mm)
    • Removal Nut: Yes
    • Item Height: 4.000 In. (102mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
04884899AB, 04884899AC, 05038041AA, 51372, 872025, 89017527, B329, F1AZ6714A, F1AZ6731BD, FL820, FL820S, L24651, M1210, M1210A, OD5419, PF1250, PH2, PH8A...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2008 - Dodge Magnum V - 8 Cyl 5.7L 345

K&N
  • Oil Filter
  • H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: .750 In. - 16unf-2b
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 1.200 Lbs. (0.6 Kg)
    • Product Box Height: 4.500 In. (114mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.880 In. (98mm)
    • Package Material: Paperboard
    • Product Box Length: 3.880 In. (98mm)
    • PSI Relief Valve: 8-11
    • Outside Diameter: 3.656 In. (93mm)
    • Removal Nut: Yes
    • Item Height: 4.000 In. (102mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
2008 - Dodge Magnum V 6059 8 Cyl 6.1L 370

K&N
  • Oil Filter
  • H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: .750 In. - 16unf-2b
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 1.200 Lbs. (0.6 Kg)
    • Product Box Height: 4.500 In. (114mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.880 In. (98mm)
    • Package Material: Paperboard
    • Product Box Length: 3.880 In. (98mm)
    • PSI Relief Valve: 8-11
    • Outside Diameter: 3.656 In. (93mm)
    • Removal Nut: Yes
    • Item Height: 4.000 In. (102mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
021115351A, 102318005, 102618005, 111836, 11436936, 11711396, 121965, 1220185, 1220325, 1220893, 122B185, 122P185, 126385A1, 12662862, 129009, 12H3274, 132023, 1336188C1...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1978 - Dodge Magnum V - 8 Cyl 5.9L 360

Anco
  • ANCO Conventional 31 Series Wiper Blades 22
  • Original Blade Type
  • ANCO 31-Series Wiper Blade (Pack of 1)
  • 31-Series
  • Product Attributes:
    • Adapters Required: No
    • Adapters Included: Yes
    • Frame Color: Black
    • Wiper Blade Connection Type: J-hook: 9x3mm, 9x4mm; Classic Side-pin: 1/4"
    • Blade Material: Duraklear - Natural Rubber
    • Frame Material: Metal; Plastic
    • Blade Type: Conventional/bridge
    • Refillable: Yes
  • The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
22-1, 22-4, 22-51, 22-54, 22-59, 22-9, 23-1, 23-51, 30-221, 350-221, 358-220, 359-230, 3722, 38-220, 39-221, 39-230, 40322, 40722A...VIEW MORE

Additional Fitment Information:
Vehicle Position
2007 - Dodge Magnum Front

Trico
  • 22" TRICO Exact Fit Wiper Blade
  • 9mm Hook, 9x4 Hook, 1/4" Side Lock
  • TRICO Exact Fit
  • Provides original factory quality for vehicles with metal conventional wipers

Additional Fitment Information:
Vehicle Position
2006 - Dodge Magnum Front

Champion
  • Champion Copper Plus- Boxed - RE14MCC4
  • 2 Plugs Per Cylinder Required Gap 0.044in ; Plug Type RE14MCC4 Actual OE Part
  • Champion Copper Plus 570 Spark Plug (Carton of 4)
  • Copper Plus
  • Product Attributes:
    • Seat Type: Tapered
    • Electrical Terminal Type: Non-removable Nut
    • Classification: Champion Copper Plus
    • Resistor Type: Yes
    • Plug Type: Re14mcc4
    • Hex Size:
      • 0.625
      • 15.880
    • Reach: 0.984
    • Center Electrode Tip Material: Nickel
    • Manufacturer Heat Range: 14
    • Pre-Gap Size:
      • 0.045
      • 1.15
    • Ground Electrode Core Material: Nickel
    • Insulator Height: 0.12
  • Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
  • Suggested Purchase Quantity: 16
    • Most jobs typically require 16 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
RE14MCC4

Additional Fitment Information:
Vehicle Block CC Engine CID
2006 - Dodge Magnum V - 8 Cyl 5.7L 345

Trico
  • 22" TRICO Tech Beam Blade
  • 9mm Hook, 9x4 Hook, 1/4" Side Lock, Side Pin (17mm), Pinch Tab, Pinch Tab Button, Push Button (22mm), Push Button (19mm)
  • TRICO Tech
  • All-weather durability

Additional Fitment Information:
Vehicle Position
2005 - Dodge Magnum Front
Showing 1 - 10 of 3797 products

Loading...