2006 Nissan Altima Fuel Pump Module Assembly Parts
Choose your Engine for your 2006 Nissan Altima
Image
Product
Price
- Fuel Pump Module Assembly
- without California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 10
- Voltage: 13.0
- Maximum Pressure: 52.0
- Fuel Type: Gas
- Pump Type: Electric
- Resistance Ohms Full: 5.0
- Outlet Outside Diameter: 0.375
- Terminal Quantity: 5
- Outlet Quantity: 2
- Internal Or External Strainer: Internal
- Resistance Ohms Empty: 80.0
- System Pressure: 48 Psi
- Terminal Type: Blade
- Fuel Level Sender Assembly Included: Yes
- Vapor Pressure Sensor: No
- Terminal Gender: Male
- Lock Ring Included: No
- Average Flow Rating: 23
- Regulator Included: Yes
- Strainer Included: Yes
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
17040-7Y000, 17040-9J300, 17040-9J400, 17040-ZB00A, 17040-ZD80B, 17040ZD80B, 67991, A27057, CFG0987, E8545M, M2287394, P76169M, SP4013M
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Nissan Altima | L | 2488 | 4 Cyl 2.5L | 152 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Lifetime Warranty
- with California Emissions
- Includes Fuel Tank Sending Unit
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Nissan Altima | L | 2488 | 4 Cyl 2.5L | 152 |
- with California Emissions
- DREIK, Made in Japan
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Nissan Altima | L | 2488 | 4 Cyl 2.5L | 152 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Nissan Altima | L | 2488 | 4 Cyl 2.5L | 152 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Nissan Altima | V | 3498 | 6 Cyl 3.5L | - |
- Fuel Pump Module Assembly
- with California Emission System; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 7
- Voltage: 12.0
- Maximum Pressure: 94.0
- Fuel Type: Gas
- Pump Type: Electric
- Resistance Ohms Full: 6.0
- Outlet Outside Diameter: 0.375
- Terminal Quantity: 5
- Internal Or External Strainer: Internal
- Resistance Ohms Empty: 81.0
- System Pressure: 51 Psi
- Terminal Type: Blade
- Fuel Level Sender Assembly Included: Yes
- Vapor Pressure Sensor: No
- Terminal Gender: Male
- Lock Ring Included: No
- Regulator Included: Yes
- Strainer Included: Yes
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
17040-8J020, 17040-ZD90A, 69906, A27057, CFG1783, E8660M, P76174M, SP4065M
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Nissan Altima | L | 2488 | 4 Cyl 2.5L | 152 |
Showing 1 - 6 of 6 products
Loading...