Differential Rebuild Kit Yukon Gear Parts

Choose a Year for your vehicle

Showing 1 - 10 of 59 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2003 Isuzu Ascender Differential Rebuild Kit 8 Cyl 5.3L Yukon Gear

Yukon Master Overhaul kit for 99-08 GM 8.6in. differential.
8.6 in. 10 Bolt; Pin/Car Brngs; Inst GM 8.6 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; Uses M802048 Inner Pinion Bearing~GM 8.6 in.; Pin/Car Brngs; Inst
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known In The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov
- Model: Gm 8.6 In.
Features:
- Fits 1999-2008 GM 8.6 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Drive Type	CID
2003 - Isuzu Ascender	V	5328	8 Cyl 5.3L	4WD	325

5 In Stock

$379.05 USD

$454.86 USD

Brand	Yukon Gear
Part #	Y11YK GM8.6-A
Condition	New
Warehouse	B

2001 Dodge Dakota Differential Rebuild Kit 8 Cyl 4.7L Yukon Gear

Yukon Master Overhaul kit for 01/up Chrysler 9.25in. rear differential
9.25 in. 12 Bolt; Rear Chrysler 9.25 in.~Chrysler 9.25 in. Rear; Differential Rebuild Kit; Timken Bearings
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Chrysler 9.25 In.
Features:
- Fits 2001 And Up Chrysler 9.25 in. Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Kit Are Carrier Bearings And Races
- Pinion Bearings And Races
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve
- Thread Locker
- Marking Compound w/Brush And Silicone
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

This Part Fits the Following OEM/Substitute Numbers:

ZK C9.25-R-B

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Drive Type	CID
2001 - Dodge Dakota	V	-	8 Cyl 4.7L	Base	4WD	287

1 In Stock

$435.54 USD

$522.65 USD

Brand	Yukon Gear
Part #	Y11YK C9.25-R-B
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Master Overhaul kit for Dana 30 reverse rotation diff for use with+07 JK
Dana; For Use w/Reverse Rotation Diff Dana 30~Dana 30 JK Front; Differential Rebuild Kit; Timken Bearings; Includes Inner Axle Seals
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model:
  - Dana 30 Reverse
  - Dana 30 Standard
Features:
- Fits Dana Spicer 30 JK
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Axle Seals
- Complete Shim Kit
- Ring Gear Bolts
- Includes Pinion Nut
- Crush Sleeve
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Drive Type	CID
2007 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Unlimited Sahara	4WD	231

14 In Stock

$544.95 USD

$653.94 USD

Brand	Yukon Gear
Part #	Y11YK D30-JK
Condition	New
Warehouse	B

2013 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.6L Yukon Gear

Yukon Gear/Install Kit package for Jeep JK Rubicon; 4.88 ratio.
Dana 44; Dana 35; 4.88 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; Dana 35; 4.88 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit
Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
Yukon Gear And Install Kit
Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
  - Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  - Warnings: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Model:
  - Dana 35 Standard
  - Dana 44
Features:
- Fits Jeep Rubicon JK
- Includes Front And Rear Ring Pinion Sets And Master Overhaul Kits
- 4.88 Ratio
Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.

This Part Fits the Following OEM/Substitute Numbers:

ZGK015

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2013 - Jeep Wrangler	V	3604	6 Cyl 3.6L	Rubicon	220

1 In Stock

$1,949.45 USD

$2,339.34 USD

Brand	Yukon Gear
Part #	Y11YGK015
Condition	New
Warehouse	B

2009 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Gear/Install Kit package for Jeep JK Rubicon; 4.11 ratio.
4.11 Ratio 4.11 Ratio
Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
Yukon Gear And Install Kit
Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
  - Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  - Warnings: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Model: Chrysler 11.5 In.
Features:
- Fits Jeep Rubicon JK
- Includes Front And Rear Ring Pinion Sets And Master Overhaul Kits
- 4.11 Ratio
Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.

This Part Fits the Following OEM/Substitute Numbers:

ZGK056

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2009 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Rubicon	231

5 In Stock

$1,935.76 USD

$2,322.91 USD

Brand	Yukon Gear
Part #	Y11YGK056
Condition	New
Warehouse	B

2010 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

This Part Fits the Following OEM/Substitute Numbers:

ZK D44-JK-STD

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2010 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Rubicon	231

8 In Stock

$674.19 USD

$809.03 USD

Brand	Yukon Gear
Part #	Y11YK D44-JK-STD
Condition	New
Warehouse	B

2012 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.6L Yukon Gear

Yukon Gear/Install Kit package for Jeep JK Rubicon; 5.38 ratio
Dana 44; 5.38 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; 5.38 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit
Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
Yukon Gear And Install Kit
Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
  - Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  - Warnings: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Model:
  - Dana 35 Standard
  - Dana 44
Features:
- Fits Jeep Rubicon JK
- Includes Front And Rear Ring Pinion Sets And Master Overhaul Kits
- 5.38 Ratio
Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.

This Part Fits the Following OEM/Substitute Numbers:

ZGK017

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2012 - Jeep Wrangler	V	3604	6 Cyl 3.6L	Unlimited Rubicon	220

2 In Stock

$1,949.45 USD

$2,339.34 USD

Brand	Yukon Gear
Part #	Y11YGK017
Condition	New
Warehouse	B

2007 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Gear/Install Kit package for Jeep JK Rubicon; 5.13 ratio
Dana 44; Dana 35; 5.13 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; Dana 35; 5.13 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit
Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
Yukon Gear And Install Kit
Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
  - Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  - Warnings: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Model:
  - Dana 35 Standard
  - Dana 44
Features:
- Fits Jeep Rubicon JK
- Includes Front And Rear Ring Pinion Sets And Master Overhaul Kits
- 5.13 Ratio
Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.

This Part Fits the Following OEM/Substitute Numbers:

ZGK016

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2007 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Rubicon	231

1 In Stock

$1,949.45 USD

$2,339.34 USD

Brand	Yukon Gear
Part #	Y11YGK016
Condition	New
Warehouse	B

2011 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Master Overhaul kit for Dana 30 reverse rotation diff for use with+07 JK
Dana; For Use w/Reverse Rotation Diff Dana 30
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model:
  - Dana 30 Reverse
  - Dana 30 Standard
Features:
- Fits Dana Spicer 30 JK
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Axle Seals
- Complete Shim Kit
- Ring Gear Bolts
- Includes Pinion Nut
- Crush Sleeve
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2011 - Jeep Wrangler	V	3778	6 Cyl 3.8L	Rubicon	231

14 In Stock

$544.95 USD

$653.94 USD

Brand	Yukon Gear
Part #	Y11YK D30-JK
Condition	New
Warehouse	B

2008 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.8L Yukon Gear

Yukon Gear/Install Kit package for Jeep JK Rubicon; 4.56 ratio
4.56 Gear Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit 4.56 Gear Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kits
Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
Yukon Gear And Install Kit
Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
  - Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  - Warnings: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Model: Dana 44
Features:
- Fits 2007 And Newer Jeep JK Rubicon
- Includes Front And Rear Ring Pinions And Master Install Kits
- 4.56 Ratio
Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.