Image
Product
Price
- 5 in. Lift; w/Stealth
- Radius Arm Lift System; 5 in. Lift; w/Stealth;
- Radius Arm Lift System
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Unsurpassed Strength And Performance
- Patent Pending Radius Arms
- Fully Tubular Structure
- Dimple Die Side Plates
- Adjustable Alignment Cam Allows Caster Adjustment
- Improving On The Ram Suspension Design, Fabtech Offers Their Trademark Radius Arms In A Complete Lift Kit System. These Exclusive Tubular Radius Arms Have Recognizable Dimple Die Side Plates For Superior Strength And A Signature Of Quality. The Rugged Arms Provide Increased Caster For Use With Oversized Tires And Lifted Suspension Heights. The Factory Front Ram Coil Spring Has A Noticeable Bow To It With A Very High Spring Rate For The Weight Rating Of The Vehicle. This Creates A Harsh Ride With A Nervous Feel From The Suspension. To Correct This, Fabtech Uses A Straight Vertical Coil Design. In Order To Utilize A Straight Coil, The Lower Spring Seat Mount Must Be Modified Via A Fabtech Patented Angular Spring Mount That Attaches To The Stock Seat. This Eliminates The Bow To The Spring And Allows For A Lower Rate With A Straight Coil For A Supple Ride Without Sacrificing Load Carrying Capacity. A Fabtech Exclusive. For The Rear, This Lift Kit Has The Perfect Balance Between Ride Quality And Retaining The Factory Carrying Capacity. By Utilizing A Dual Rate Spring Design, It Provides A Good Highway Ride In The First Stage Of Compression And Then The Second Stage Handles Heavy Loads. Heavy Duty 1/4 in. Thick Steel Front And Rear Track Bar Drop Brackets Center The Axles Under The Vehicle With The New Ride Height. A Fabtech Innovation With This Ram Lift Kit Is The Heavy Duty Steel Front Bump Extensions. They Retain The Stock Bump Stop Cushions For Progressive Damping And Will Not Allow The Suspension To Over Travel. This Is A Superior Feature Compared To Replacement Long Length Urethane Bump Stops As They Can Push Out Under Harsh Conditions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2022 - Ram 2500 | V | 6424 | 8 Cyl 6.4L | 4WD | 392 |
- Box 1 of 2 /Rear Dirt Logic 2.25 Shocks; For PN[K3184DL] Will Not Fit w/Power Wagon Models~Does Not Fit Standard Cab Models~Will Not Fit Factory Air Suspension
- Component Box; Box 1 of 2 /Rear Dirt Logic 2.25 Shocks; For PN[K3184DL];
- Component Box
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Component box for a specific part number. Contains necessary parts for your lift kit needs.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2019 - Ram 2500 | 4WD |
- Box 1 of 2; For PN[K3180DL/K3180M/K3180] Will Not Fit w/Power Wagon Models~Does Not Fit Standard Cab Models~Will Not Fit Factory Air Suspension
- Component Box; Box 1 of 2; For PN[K3180DL/K3180M/K3180];
- Component Box
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Component box for a specific part number. Contains necessary parts for your lift kit needs.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2019 - Ram 2500 | 4WD |
- Box 2 of 2; For PN[K3180DL/K3180M/K3180] Will Not Fit w/Power Wagon Models~Does Not Fit Standard Cab Models~Will Not Fit Factory Air Suspension
- Component Box; Box 2 of 2; For PN[K3180DL/K3180M/K3180];
- Component Box
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Component box for a specific part number. Contains necessary parts for your lift kit needs.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2019 - Ram 2500 | 4WD |
- Box 2 of 2; For PN[K3184DL] Will Not Fit w/Power Wagon Models~Does Not Fit Standard Cab Models~Will Not Fit Factory Air Suspension
- Component Box; Box 2 of 2; For PN[K3184DL];
- Component Box
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Component box for a specific part number. Contains necessary parts for your lift kit needs.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2019 - Ram 2500 | 4WD |
- For PN[K3173/K3173DL/K3173M] Will Not Fit w/Power Wagon Models~Does Not Fit Standard Cab Models~Will Not Fit Factory Air Suspension
- Component Box; For PN[K3173/K3173DL/K3173M];
- Component Box
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Other Parts Required For A Complete Set
- The Kits Are Made From The Highest Quality Materials
- Guarantee Superior Performance And Functionality
- Component box for a specific part number. Contains necessary parts for your lift kit needs.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2019 - Ram 2500 | 4WD |
- For 3 in. Lift Crawler System; For PN [K4171DL/K4172DL]
- Long Arm Box Kit; For 3 in. Lift Crawler System; For PN [K4171DL/K4172DL];
- Long Arm Box Kit
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Front And Rear Lower 5 Ton Link Arms
- Front Link Arm Crossmember And Skid Plate
- Rear Lower Link Arm Mounts
- Front And Rear Corner Specific Dual Rate Coil Springs
- Front And Rear Bump Stop Extensions
- Front And Rear Sway Bar Links
- Front And Rear Brake Line Drops
- Front And Rear Track Bar Bracket
- Heavy Duty Flipped Draglink
- Front Shock Mount Brackets
- Front And Rear Stealth Monotube Shocks
- Fabtechs JL Crawler long arm systems are built to meet the most experienced drivers expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawlers 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2 in. OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtechs legendary 5 Ton joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Jeep Gladiator |
- For 3 in. Lift Crawler System; For PN[K4169M/K4169DL/K4170DL] Exhaust Modification Required. Order Loop Delete Pipe (FTS94060)~Installation Requires Welding~Heavy Offroad Requires Driveshafts Front (FTS94057) Rear (FTS94068)
- Long Arm Box Kit; For 3 in. Lift Crawler System; For PN[K4169M/K4169DL/K4170DL];
- Long Arm Box Kit
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Front And Rear Lower 5 Ton Link Arms
- Front Link Arm Crossmember And Skid Plate
- Rear Lower Link Arm Mounts
- Front And Rear Corner Specific Dual Rate Coil Springs
- Front And Rear Bump Stop Extensions
- Front And Rear Sway Bar Links
- Front And Rear Brake Line Drops
- Front And Rear Track Bar Bracket
- Heavy Duty Flipped Draglink
- Front Shock Mount Brackets
- Front And Rear Stealth Monotube Shocks
- Fabtechs JL Crawler long arm systems are built to meet the most experienced drivers expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawlers 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2 in. OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtechs legendary 5 Ton joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Jeep Gladiator |
- For 5 in. Lift Crawler System; For PN [K4179DL/K4180DL]
- Long Arm Box Kit; For 5 in. Lift Crawler System; For PN [K4179DL/K4180DL];
- Long Arm Box Kit
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
-
Features:
- Front And Rear Lower 5 Ton Link Arms
- Front Link Arm Crossmember And Skid Plate
- Rear Lower Link Arm Mounts
- Front And Rear Corner Specific Dual Rate Coil Springs
- Front And Rear Bump Stop Extensions
- Front And Rear Sway Bar Links
- Front And Rear Brake Line Drops
- Front And Rear Track Bar Bracket
- Heavy Duty Flipped Draglink
- Front Shock Mount Brackets
- Front And Rear Stealth Monotube Shocks
- Fabtechs JL Crawler long arm systems are built to meet the most experienced drivers expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawlers 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2 in. OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtechs legendary 5 Ton joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Jeep Gladiator |
- For 5 in. Lift Crawler System; For PN[K4177M/K4177DL/K4178DL] Exhaust Modification Required. Order Loop Delete Pipe (FTS94060)~Installation Requires Welding~Heavy Offroad Requires Driveshafts Front (FTS94057) Rear (FTS94068)
- Long Arm Box Kit; For 5 in. Lift Crawler System; For PN[K4177M/K4177DL/K4178DL];
- Long Arm Box Kit
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov
-
Features:
- Front And Rear Lower 5 Ton Link Arms
- Front Link Arm Crossmember And Skid Plate
- Rear Lower Link Arm Mounts
- Front And Rear Corner Specific Dual Rate Coil Springs
- Front And Rear Bump Stop Extensions
- Front And Rear Sway Bar Links
- Front And Rear Brake Line Drops
- Front And Rear Track Bar Bracket
- Heavy Duty Flipped Draglink
- Front Shock Mount Brackets
- Front And Rear Stealth Monotube Shocks
- Fabtechs JL Crawler long arm systems are built to meet the most experienced drivers expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawlers 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2 in. OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtechs legendary 5 Ton joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Jeep Gladiator |
Showing 1 - 10 of 1630 products
Loading...