4-Wire Flat Tester; LED Tester For 4 Wire Flats; LEDs Confirm Electrical Continuity;
Product Attributes:
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
Red LED Light Will Glow If Connection Is Correct
Tests Left Turn And Right Turn
Tests Brake And Tail Lights
Tests Marker Lights
90 Day Warranty From The Date Of Original Purchase
Quickly and easily confirm if your vehicle 4 flat connector wiring is properly installed and functional. Fits on your keychain to keep it handy! LEDs test left/right turn, brake and taillight.
Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made
need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Perfect For Installing And Troubleshooting Wiring Systems
Test Wiring For Battery Voltage Brake Voltage/Signal Circuits
Volt Meter Indicator Measures Tow Vehicle And Electric Brakes
Current Meter Uses Magnets To Measure Brake Control Output
Includes A 20 ft. Cable For Easy Single-User In-Cab Testing
Constructed w/Durable Components For Long Life And Dependability
Can Be Used For Two-Axle Or Three-Axle Trailers
Made In USA
For any type of trailer, part of towing responsibly is making sure your trailer lights are working properly. With heavy-duty trailers, such as a large boat trailer or 5th wheel camper, that responsibility is even greater. Giving safety its proper priority is easy with the CURT 7-way RV blade trailer brake controller tester. This sophisticated towing electrical tester plugs into any 7-way RV blade socket and allows you to check your vehicle wiring for battery voltage, brake voltage and signal circuits. The CURT 7-way RV blade brake controller tester accurately measures the brake and battery voltage output at your 7-way connector. It features a volt meter and a current meter for testing brake power and allows you to test the power output of your trailer brake controller unit. The 7-way brake controller tester can be used for trailers with two or more axles, and because it uses a special magnet system, brake controller output can be measured even without a trailer attached. It includes easy-to-follow testing instructions and a 20 cable for single-user, in-cab testing to make it even easier to get to the bottom of any electrical problem. Operating the CURT 7-way RV blade electrical tester is simple and does not require an additional power source. Simply plug the 7-way RV blade into your vehicles electrical socket, select your settings with the axle and voltage switches, and you are ready to begin. The tester is able to check your left and right turn signals, brake lights, tail lights and reverse lights if applicable. It also provides the voltage and current of your vehicles brake controller output. The CURT RV blade tester also offers a number of potential causes of electrical failure, including fuse issues, inadequate wiring, damaged wires or a defective brake controller. The CURT 7-way brake controller tester is compatible with all CURT trailer brake controllers and gives you the peace of mind to Bring It on any towing adventure.
Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made
need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more