Image
Product
Price
- Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings Install Time 3-4 Hours
- X-Flex Control Arm Set; Front Lower; Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings;
- X-Flex Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fully Greaseable.
- Upper Joints Pivot Up To 20 Degrees.
- Lower Joints Pivot Up To 35 Degrees.
- Allows For Greater Articulation Off-road.
- With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thirty-five degrees pivot range.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Jeep Wrangler | Front Lower | Unlimited X |
- Rear Upper
- Control Arm Kit; Rear Upper;
- Control Arm Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Control Arm Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2004 - Jeep TJ | Rear | Rubicon |
- Does Not Includes Front Axle Side Upper Control Arm Bushings
- Control Arm Kit; Front; Does Not Includes Front Axle Side Upper Control Arm Bushings;
- Control Arm Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Control Arm Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1990 - Jeep Cherokee | Front |
- Use Up To 33 (in) x 11.50 (in) Tires with Aluminum Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- These upper control arms feature ICON's patented Delta Joint, a heavy-duty high-angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball.
- 19-21 RANGER TUBULAR UCalifornia DJ KIT (AL KNUCKLE ONLY)
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Control Arm Material: Dom Steel
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: Yes
- Adjustable: No
- Pre-Greased: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Title: Icon 2019-2021 Ford Ranger Tubular Upper Control Arm/delta Joint Kit, Al Knuckle
- Control Arm Color: Black
- Bushing Material: Polyurethane
- Service Parts: 614519 - Delta Joint Install Press Adapter Tube
-
Features:
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700)
- 1026 DOM Steel Construction
- These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford Ranger | Front Upper | XL |
- Use Up To 33 (in) x 11.50 (in) Tires with 0 (in) - 3.5 (in) Suspension Lift with Aluminum Steering Knuckles ; Recommended Aftermarket Wheel Size: 17x8.5" with 5.75” Backspace / 25mm Offset
- ICON billet UCAs are made from CNC machined 6061 aluminum and feature PTFE-lined rod ends and ICON’s Delta Joint, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
- 19-21 RANGER BILLET UCalifornia DJ KIT (AL KNUCKLE ONLY)
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Control Arm Material: Aluminum
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Billet
- Grease Fitting Included: Yes
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Title: Icon 2019-2021 Ford Ranger Billet Upper Control Arm/delta Joint Kit, Al Knuckle
- Control Arm Color: Silver
- Bushing Material: Rod End Bearing
- Service Parts: 614519 - Delta Joint Install Press Adapter Tube
-
Features:
- CNC machined 6061 billet aluminum construction for light weight and exceptional strength
- Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700)
- Camber and caster adjustability allows for precise wheel alignment
- ICON double adjuster sleeves allow for on-vehicle adjustment
- Vehicle specific taper pin provides OE-like fitment
- PTFE Lined 7/8” FK Rod Ends for improved response
- Built in o-ring sealed dust cover cap
- These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2020 - Ford Ranger | Front Upper | XLT |
- 2007-2018 JEEP JK FRONT LOWER FIXED LINK KIT
- 07-18 JK FRONT LOWER FIXED LINK KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Dom Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: Yes
- Adjustable: No
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-18 Jk Front Lower Fixed Link Kit
- Control Arm Color: Black
- Bushing Material: Polyurethane
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushings offer vibration isolation, controlled deflection, with maximum articulation and responsiveness
- No grease required for life of bushings
- Dual stage powder coat for excelled corrosion resistance
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel front lower link arms for the Jeep Wrangler JK are a significant upgrade over the factory units due to increases in strength and performance as well as improved alignment specs. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This front lower link arm kit features multi durometer bushings that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The increased range of motion provided by these bushings allows the suspension function as intended, without the bushing bind that limits the vehicle in stock form.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Jeep Wrangler | Front Lower |
- Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings Install Time 3-4 Hours
- X-Flex Control Arm Set; Front Upper; Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings;
- X-Flex Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fully Greaseable.
- Upper Joints Pivot Up To 20 Degrees.
- Lower Joints Pivot Up To 35 Degrees.
- Allows For Greater Articulation Off-road.
- With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thrity-five degrees pivot range.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Jeep Wrangler | Front Upper | Unlimited Sahara |
- Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings Install Time 3-4 Hours
- X-Flex Control Arm Set; Rear Upper; Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings;
- X-Flex Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fully Greaseable.
- Upper Joints Pivot Up To 20 Degrees.
- Lower Joints Pivot Up To 35 Degrees.
- Allows For Greater Articulation Off-road.
- With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thirty-five degrees pivot range.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Jeep Wrangler | Rear Upper | Rubicon |
- Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings Install Time 3-4 Hours
- X-Flex Control Arm Set; Rear Lower; Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings;
- X-Flex Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fully Greaseable.
- Upper Joints Pivot Up To 20 Degrees.
- Lower Joints Pivot Up To 35 Degrees.
- Allows For Greater Articulation Off-road.
- With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications.Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thirty-five degrees pivot range.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Jeep Wrangler | Rear Lower | Unlimited Sahara |
- 4 in.; Front/Rear/Upper/Lower; Adjustable Flex Joints w/Cleveite Rubber Bushings; Durable Heavy Wall DOM Tubing; 1/4in Thick Tensile Strength Plate Steel
- Control Arm Upgrade Kit; 4 in.; Front/Rear/Upper/Lower; Adjustable Flex Joints w/Cleveite Rubber Bushings; Durable Heavy Wall DOM Tubing; 1/4in Thick Tensile Strength Plate Steel;
- Control Arm Upgrade Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- True 4-Link Setup With New Longer Travel Arms
- Prevents Binding And Rear-Steer
- Coil Correction Plates Correct The Rear Coil Spring Angle
- Clevite Brand OEM Style Rubber Bushings
- Flex Joints Are Fully Rebuildable
- Flex Joints Feature A 2.5 in. Diameter Body And 1.25 in. Thread
- Fully Greasable
- Transform your 4in kit into a full-fledge long arm setup with Rough Countrys 4in Long Arm Upgrade Kit. This incredible upgrade converts your Rough Country 4in standard or 4in X-series kit into an extremely capable 4-link Long Arm suspension design.This upgrade gives your Jeep incredible flex and unbelievable clearance at a fraction of the cost of buying an entirely new kit. The 4-link setup includes a full set of front and rear upper and lower adjustable control arms giving you full control to adjust the wheelbase and pinion angle. Each arm features Rough Countrys adjustable flex joints with Clevite rubber bushings and is constructed out of durable heavy-wall DOM tubing for a long lifespan of flex and performance. All brackets are made of a thick 1/4in thick high tensile strength plate steel.Rough Countrys 4in kit boasts an easier install process than most long arm kits, with no welding and no removal of the factory crossmember required for installation. The kit also includes extended stainless steel brake lines and coil correction plates making it that much faster and easier to install. Includes a Lifetime Replacement Guarantee!
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2007 - Jeep Wrangler | Front and Rear | Unlimited Sahara | 4WD |
Showing 1 - 10 of 223 products
Loading...