Image
Product
Price
- Black; Aluminum; Self-adhesive; For Exhaust Cavity Rear Wheel
- Pair of black aluminum exhaust cavity rear wheel self-adhesive heat wrap
- Exhaust Heat Shielding
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Black Coated Aluminum Heat Shield With 1/8 In. Composite Glass Core
- Tested To Withstand Temperatures Up To 1750 °F
- Proprietary High Temp Black Coating
- Flexible And Pre-Shaped To Easily Fit C8 Rear Tire Cavity
- Easy Self-Adhesive Installation Simply Peel And Stick
- Adhesive Not Effected By Temperature
- Wind Or Water
- For Use With Any Branded Exhaust Including Stock
- The C8 Corvette is an engineering marvel with its mid-engine configuration eye catching body lines and incredible performance. Yet with that engine placement comes an abundance of heat. One area Chevrolet added extra heat shielding is behind the rear tire in the exhaust cavity to protect from excessive exhaust heat. While the aluminum reflective substrate heat shielding is effective, it is a complete eye sore. Eliminate that eye sore while adding even more heat protection with black heat shielding from CORSA Performance. When placed behind the rear tire the heat shielding adds an added layer to protection from exhaust heat while eliminating the reflective eye sore seen through the exhaust bezzels on the C8 Corvette.
Additional Fitment Information:
| Vehicle | Body |
|---|---|
| 2021 - Chevrolet Corvette | Coupe |
- Exhaust Insulating Wrap
- Exhaust Insulating Wrap; 2 in. x 1/16 in. x 15 ft.; Graphite Black;
- Product Attributes:
- Overall Length: 180.000 In.
- Width: 2.000 In.
-
Features:
- Creates More Horsepower
- Reduces Temperature Under The Hood
- Withstands Heat Up To 2000 Degrees
- Thermo Conductive Technology
- Controls Heat Build Up And Dissipation
- The original Exhaust Insulating Header Wrap was developed over 23 years ago by Thermo-Tec and The Graphite Black Exhaust Insulating Header Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Header Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.The Thermo-Tec wrap effectively improves the scavenging of exhaust gases by the headers from the engines combustion chambers.Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000-degF, and contains no asbestos.Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation. Fittings
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Adhesive Backed Heat Barrier
- Adhesive Backed Heat Barrier; 12 in. x 24 in.;
- Product Attributes:
- Overall Length: 24.000 In.
- Width: 12.000 In. (1 Ft.)
- Max Temperature Rating: 2000 Degree
-
Features:
- Adhesive Backed Heat Barrier
- Easy Application To Any Surface
- Makes A Professional Appearance
- Withstands Temperatures Up To 2000 Degrees
- The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat.Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000-degreesF.The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.Some Typical uses include: Firewall, hoods, hoses, doors and anywhere you want to control radiant heat.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Adhesive Backed Heat Barrier
- Adhesive Backed Heat Barrier; 12 in. x 12 in.;
- Product Attributes:
- Overall Length: 12.000 In.
- Width: 12.000 In. (1 Ft.)
- Max Temperature Rating: 2000 Degree
-
Features:
- Adhesive Backed Heat Barrier
- Easy Application To Any Surface
- Makes A Professional Appearance
- Withstands Temperatures Up To 2000 Degrees
- The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat.Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000-degreesF.The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.Some Typical uses include: Firewall, hoods, hoses, doors and anywhere you want to control radiant heat.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Express™ Thermo Sleeve
- Express™ Thermo Sleeve; w/Hook and Loop Fastener; 3 ft. ; Fits Small Wires 1/2 in. - 1 in. dia.;
- Product Attributes:
- Inside Diameter: 1.500 In.
- Product Length: 3 Ft.
- Max Temperature Rating: 2000 Degree
-
Features:
- Combination Reflective Foil w/Hook and Loop Fastener
- Protects From Extreme Heat
- Thermal And Abrasion Resistance
- Silicone Coated Fiberglass Fire Sleeving
- Continuous Protection To 500 Degrees
- Short Term Protection Exposure To 2200 Degrees
- Thermo-Tecs new Express Sleeves are just exactly what our customers have been looking for. The new easy to use sleeving is a combination of a high temperature insulation material to a highly reflective mylar foil with a hook and loop fastener. The sleeving is designed to provide maximum protection for wires, hoses, and cables from the very damaging effect of radiant heat with an easy application. Simply pull apart the material, wrap around the wire, and re-close the sleeving. Express Sleeves reflect over 90-percent of radiant heat, is fireproof and fire resistant, and just looks good. Express Sleeves come in 1 1/2-inch diameter in 3-foot, 12-foot, and 50-foot lengths.The mylar foil can be effective with radiant heat up to 2000-deg F and 400-degF for conductive heat.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Express™ Thermo Sleeve
- Express™ Thermo Sleeve; 3 ft. ; Fits Wires/Bundles 1 in. - 1 1/2 in. dia.;
- Product Attributes:
- Inside Diameter: 1.500 In.
- Product Length: 3 Ft.
- Max Temperature Rating: 2000 Degree
-
Features:
- Hook and Loop Fastener
- Protects From Extreme Heat
- Thermal And Abrasion Resistance
- Silicone Coated Fiberglass Fire Sleeving
- Continuous Protection To 500 Degrees
- Short Term Protection Exposure To 2200 Degrees
- Thermo-Tecs new Express Sleeves are just exactly what our customers have been looking for. The new easy to use sleeving is a combination of a high temperature insulation material to a highly reflective mylar foil with a hook and loop fastener. The sleeving is designed to provide maximum protection for wires, hoses, and cables from the very damaging effect of radiant heat with an easy application. Simply pull apart the material, wrap around the wire, and re-close the sleeving. Express Sleeves reflect over 90-percent of radiant heat, is fireproof and fire resistant, and just looks good. Express Sleeves come in 1 1/2-inch diameter in 3-foot, 12-foot, and 50-foot lengths.The mylar foil can be effective with radiant heat up to 2000-deg F and 400-degF for conductive heat.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Thermo Shield™
- Thermo Shield™; 1 1/2 in. x 15 ft.;
- Product Attributes:
- Overall Length: 180.000 In.
- Width: 1.500 In.
- Max Temperature Rating: 2000 Degree
-
Features:
- Prevents Vapor Lock
- Easy To Apply
- Great For Hoses And Wiring
- Reflects Radiant Heat Up To 2000 Degrees
- Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. NOT FOR USE ON EXHAUST.The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance and protect parts from over 90-percent of radiant heat up to 2000 degrees farenheight
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Thermo Guard FR (Flame Retardant)
- Thermo Guard FR (Flame Retardant); 48 in. x 72 in.; One Side Foil;
- Product Attributes:
- Overall Length: 72.000 In.
- Width: 48.000 In. (4 Ft.)
-
Features:
- High Quality Heat And Sound Insulation
- All Materials Are Flame Retardant
- Easy To Apply
- Use In Vehicles And Homes
- Blocks 90 Percent Of Radiant Heat
- Thermo-Guard FR offers the best in heat and sound insulation. This lightweight, durable shield does everything: reduces sound, absorbs vibration, protects from radiant heat and provides an extra layer of insulating padding. The product features 100-percent synthetic fiber felt that provides sound and comfort control and a high-tech foil heat barrier that blocks 70-prcent(One-Sided) to 90-percent(Two-Sided) of radiant heat up to 1500-deg F.Thermo-Guard FR is very easy to apply - it can be trimmed to fit anywhere. Great for use in trucks, RVs, buses, cars, aircraft and homes. Available in two sizes with one or two foil sides. Works very well with Thermo-Tecs new Heavy Duty Spray Adhesive. When restoring a car, this product works great for both heat and sound. Thickness 3/8 of an inch.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Exhaust Insulating Wrap
- Exhaust Insulating Wrap; 2 in. x 1/16 in. x 50 ft.; Natural;
- Product Attributes:
- Overall Length: 600.000 In.
- Width: 2.000 In.
-
Features:
- Creates More Horsepower
- Reduces Temperature Under The Hood
- Withstands Heat Up To 2000 Degrees
- Thermo Conductive Technology
- Controls Heat Build Up And Dissipation
- The original Exhaust Insulating Header Wrap was developed over 23 years ago by Thermo-Tec and The Graphite Black Exhaust Insulating Header Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Header Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.The Thermo-Tec wrap effectively improves the scavenging of exhaust gases by the headers from the engines combustion chambers.Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000-degF, and contains no asbestos.Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation. Fittings
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Exhaust Insulating Wrap
- Exhaust Insulating Wrap; 1 in. x 1/16 in. x 15 ft.; Natural;
- Product Attributes:
- Overall Length: 180.000 In.
- Width: 1.000 In.
-
Features:
- Creates More Horsepower
- Reduces Temperature Under The Hood
- Withstands Heat Up To 2000 Degrees
- Thermo Conductive Technology
- Controls Heat Build Up And Dissipation
- The original Exhaust Insulating Header Wrap was developed over 23 years ago by Thermo-Tec and The Graphite Black Exhaust Insulating Header Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Header Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.The Thermo-Tec wrap effectively improves the scavenging of exhaust gases by the headers from the engines combustion chambers.Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000-degF, and contains no asbestos.Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation. Fittings
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Showing 1 - 10 of 75 products
Loading...