Image
Product
Price
- HD-M/Perf Street Sprung
- HD-M/Perf Street Sprung
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 45%
- Torque Capacity (ft/lbs.): 530
- Alignment Tool Included: Yes
- Disc Material: Organic
- Input Shaft Diameter: 1
- Part Fitment Requirement:
- Includes Act Monoloc.
- Includes Monoloc.
- Input Spline Quantity: 23
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Product Weight (lbs.): 17.3
- Clutch Disc Diameter:
- 240
- 9.4
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- ME3-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance street discs are the most popular disc purchased. They feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs feature a reduced marcel for faster shift action to complement ACT pressure plates. Quiet operation with increased strength and reliability. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
This Part Fits the Following OEM/Substitute Numbers:
05803A, 5153-2100, FX100 05110-HD00, SM102
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2012 - Mitsubishi Lancer | L | 1998 | DOHC | 4 Cyl 2.0L | Evolution GSR | 122 |
- Sport Pressure Plate
- Sport Pressure Plate
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Diameter:
- 10.5
- 266
- Product Weight (lbs.): 16.6
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- F013S uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Sport pressure plates increase clamp load by 20 to 40 percent . ACT's Sport pressure plates are recommended for use with a street disc.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | OHV | United States | 8 Cyl 5.0L | LX | Naturally Aspirated | 302 |
- Pilot Bearing
- Pilot Bearing
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Product Weight (lbs.): 0.1
- Part Fitment Requirement:
- Must Be Used With Act Flywheel (not Included).
- Must Be Used With Act Flywheel.
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- PB1010 is a high quality replacement bearing that is placed in the end of the crankshaft or in the center of the flywheel, depending on the vehicle. It is used to support the end of the transmission input shaft.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2018 - Honda Civic | L | 1996 | DOHC | 4 Cyl 2.0L | Type R | 122 |
- 6 Pad Rigid Race Disc
- 6 Pad Rigid Race Disc
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Splined Bore Diameter: 0.875
- Diameter:
- 212
- 8.3
- SFI: 1.1
- Disc Material: Ceramic
- Product Weight (lbs.): 2.3
- Spline Quantity: 20
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 6212004 is a 6-pad rigid race disc made with high quality ceramic friction materials. The disc engagement is harsher, but shifting is faster. The race disc features top grade rivets to securely fasten the part together. The rivet design and materials are carefully selected for maximum strength. The 6-pad rigid race disc is recommended for larger clutch sizes to absorb more heat and for smoother engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2001 - Acura EL | L | 1668 | SOHC | 4 Cyl 1.7L | Base | - |
- Must use with 90-01 SOHC Flywheel.
- 6 Pad Rigid Race Disc
- 6 Pad Rigid Race Disc
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Splined Bore Diameter: 0.875
- Diameter:
- 212
- 8.3
- SFI: 1.1
- Disc Material: Ceramic
- Product Weight (lbs.): 2.3
- Spline Quantity: 20
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 6212004 is a 6-pad rigid race disc made with high quality ceramic friction materials. The disc engagement is harsher, but shifting is faster. The race disc features top grade rivets to securely fasten the part together. The rivet design and materials are carefully selected for maximum strength. The 6-pad rigid race disc is recommended for larger clutch sizes to absorb more heat and for smoother engagement.
Additional Fitment Information:
| Vehicle | Transmission | Sub Model | Drive Type |
|---|---|---|---|
| 1989 - Honda Civic | Manual | Si | FWD |
- Fitment begins 02/09.
- HD/Race Sprung 6 Pad
- HD/Race Sprung 6 Pad
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 94%
- Torque Capacity (ft/lbs.): 596
- Pressure Plate Type: Heavy Duty
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Input Shaft Diameter: 1.375
- Product Weight (lbs.): 16.4
- Part Fitment Requirement:
- Must Be Used With Act Flywheel (not Included). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Must Be Used With Act Flywheel.
- Clutch Disc Diameter:
- 240
- 9.4
- Input Spline Quantity: 26
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- BM14-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Manuf. Body Code | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|
| 2009 - BMW 335i | L | 2979 | Manual | DOHC | 6 Cyl 3.0L | E93 | Base | - |
- Fitment ends 01/09. Must use ACT flywheel with sprung hub discs (flywheel not included).
- HD/Race Sprung 6 Pad
- HD/Race Sprung 6 Pad
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 94%
- Torque Capacity (ft/lbs.): 596
- Pressure Plate Type: Heavy Duty
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Input Shaft Diameter: 1.375
- Product Weight (lbs.): 16.4
- Part Fitment Requirement:
- Must Be Used With Act Flywheel (not Included). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Must Be Used With Act Flywheel.
- Clutch Disc Diameter:
- 240
- 9.4
- Input Spline Quantity: 26
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- BM14-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
Additional Fitment Information:
| Vehicle | Transmission | Sub Model |
|---|---|---|
| 2009 - BMW 535i | Manual | Base |
- HD/Race Sprung 6 Pad
- HD/Race Sprung 6 Pad
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 94%
- Torque Capacity (ft/lbs.): 596
- Pressure Plate Type: Heavy Duty
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Input Shaft Diameter: 1.375
- Product Weight (lbs.): 16.4
- Part Fitment Requirement:
- Must Be Used With Act Flywheel (not Included). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Must Be Used With Act Flywheel.
- Clutch Disc Diameter:
- 240
- 9.4
- Input Spline Quantity: 26
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- BM14-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Manuf. Body Code | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|
| 2011 - BMW 135i | L | 2979 | Manual | DOHC | 6 Cyl 3.0L | E88 | Base | - |
- Must use ACT flywheel with sprung hub discs (flywheel not included).
- HD/Race Sprung 6 Pad
- HD/Race Sprung 6 Pad
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 94%
- Torque Capacity (ft/lbs.): 596
- Pressure Plate Type: Heavy Duty
- Alignment Tool Included: Yes
- Disc Material: Ceramic
- Input Shaft Diameter: 1.375
- Product Weight (lbs.): 16.4
- Part Fitment Requirement:
- Must Be Used With Act Flywheel (not Included). Pressure Plate Bolts Included (m8-1.25 X 20mm).
- Must Be Used With Act Flywheel.
- Clutch Disc Diameter:
- 240
- 9.4
- Input Spline Quantity: 26
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- BM14-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to properly damp torsional vibrations and resist failure under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad, spring-centered race disc, engagement is harsher, but shifting is faster. The 6-pad, spring-centered disc is recommended for larger clutch sizes to absorb more heat.
This Part Fits the Following OEM/Substitute Numbers:
FX400 03055-HDC6-D, SB533-2
Additional Fitment Information:
| Vehicle | Transmission | Sub Model |
|---|---|---|
| 2008 - BMW 535xi | Manual | Base |
- 212mm conversion. Must use with 90-01 SOHC flywheel.
- 6 Pad Rigid Race Disc
- 6 Pad Rigid Race Disc
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Splined Bore Diameter: 0.875
- Diameter:
- 212
- 8.3
- SFI: 1.1
- Disc Material: Ceramic
- Product Weight (lbs.): 2.3
- Spline Quantity: 20
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 6212004 is a 6-pad rigid race disc made with high quality ceramic friction materials. The disc engagement is harsher, but shifting is faster. The race disc features top grade rivets to securely fasten the part together. The rivet design and materials are carefully selected for maximum strength. The 6-pad rigid race disc is recommended for larger clutch sizes to absorb more heat and for smoother engagement.
Additional Fitment Information:
| Vehicle | Transmission | Cylinder Head Type | Sub Model |
|---|---|---|---|
| 1996 - Honda Civic del Sol | Manual | SOHC | Si |
Showing 1 - 10 of 185 products
Loading...