Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Acura ILX | Front | Hybrid |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Acura ILX | Front | Base |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2014 - Acura ILX | Front | Base |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included)
- Kit variations : KBB-100225 KBB-101015 KBB-101108 KBB-101195 KBB-101429 KBB-101733 KBB-102034 KBB-102369 KBB-117685 KBB-118262 KBB-118738
This Part Fits the Following OEM/Substitute Numbers:
120.40082, 121.40082, 2488821337, 31601, 488821337, 510089, 7488821337, 7497, 7998, 8502, 901078, 948, 948A, 980952, AD7497, AD7497A, AR58015, ASR-HO-5035...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Acura ILX | L | 1497 | Front | 4 Cyl 1.5L | - |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- SIM Exclusive low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included) + 2x Rear Top Quality Dis
- Kit variations : KBB-113128 KBB-113160 KBB-113176 KBB-113186 KBB-113197 KBB-113212 KBB-113236 KBB-113256 KBB-117330 KBB-117572 KBB-118015
This Part Fits the Following OEM/Substitute Numbers:
120.40040, 120.40082, 121.40040, 121.40082, 248880402, 2488821337, 31420, 31601, 48880402, 488821337, 510089, 512469, 512503, 537, 7256, 7418, 748880402, 7488821337...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Acura ILX | L | 1497 | Front and Rear | 4 Cyl 1.5L | - |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G-Coating avoids corrosion
- PPF USA-engineered low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Genius Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set (Hardware Included) + 2x Rear Coa
- Kit variations : KBB-113128 KBB-113144 KBB-113160 KBB-113176 KBB-113186 KBB-113197 KBB-113236 KBB-113256 KBB-117330 KBB-117572 KBB-118015
This Part Fits the Following OEM/Substitute Numbers:
120.40040, 120.40082, 121.40040, 121.40082, 248880402, 2488821337, 31420, 31601, 48880402, 488821337, 510089, 512469, 512503, 537, 7256, 7418, 748880402, 7488821337...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Acura ILX | L | 1497 | Front and Rear | 4 Cyl 1.5L | - |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive high-density ceramic formula for optimal braking power and quietness. Our formula provides unmatched braking power in hot or cold weather with optimal pad life
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Ceramic TEC Brake Pad Set (Hardware Included) + 2x Rear Top Quality Disc Brak
- Kit variations : KBB-113128 KBB-113144 KBB-113176 KBB-113186 KBB-113197 KBB-113212 KBB-113236 KBB-113256 KBB-117330 KBB-117572 KBB-118015
This Part Fits the Following OEM/Substitute Numbers:
120.40040, 120.40082, 121.40040, 121.40082, 248880402, 2488821337, 31420, 31601, 48880402, 488821337, 510089, 512469, 512503, 537, 7256, 7418, 748880402, 7488821337...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Acura ILX | L | 1497 | Front and Rear | 4 Cyl 1.5L | - |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive Drill and Slot design for left or right installation
- PPF USA-engineered low-resin Semi-Metallic formula eliminates brake fade and glazing for optimal braking power
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- INCLUDES: 2x Rear Kugel Wheel Bearing and Hub Assembly (Both Side) + 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Coated Drilled Slotted DS-One Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set (Hardware Include
- Kit variations : KBB-113128 KBB-113144 KBB-113160 KBB-113186 KBB-113197 KBB-113212 KBB-113236 KBB-113256 KBB-117330 KBB-117572 KBB-118015
This Part Fits the Following OEM/Substitute Numbers:
120.40040, 120.40082, 121.40040, 121.40082, 2164634, 2164725, 248880402, 2488821337, 31420, 31601, 48880402, 488821337, 510089, 512469, 512503, 537, 7256, 7418...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Acura ILX | L | 1497 | Front and Rear | 4 Cyl 1.5L | - |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with multiple alloys for improved heat dissipation and performance
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic Positive Plus Brake Pad Set (Hardware Included)
This Part Fits the Following OEM/Substitute Numbers:
120.40057, 121.40057, 126054, 248880060, 248880317, 31347, 31381, 48880060, 48880317, 510111, 748880060, 748880317, 7795, 7844, 901080, 914, 980060, 980317...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Acura ILX | L | 2354 | Front | 4 Cyl 2.4L | 144 |
- Transit Auto offers the most comprehensible brake and bearing kits on the market. The unmatched performance coupled with longer lasting components make our kits the best sellers in every category. Transit Auto kits are the go-to kits for thousands of reputed mechanical shops in North America and are now available to customers.
- Transit Auto
-
Features:
- Kugel Bearings use premium quality Chevron Grade 2 molybdenum grease
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Exclusive multi-lip seals are made with Nitrile Rubber (NBR) which can successfully function at temperatures of-40°C while resisting contaminants from fluids and debris
- Manufactured with multiple alloys for improved heat dissipation and performance
- INCLUDES: 2x Front Kugel Wheel Bearing (Both Side) + 2x Front Top Quality Disc Brake Rotor (Both Side) + 1x Front Semi-Metallic SIM Brake Pad Set (Hardware Included)
This Part Fits the Following OEM/Substitute Numbers:
120.40057, 121.40057, 126054, 248880060, 248880317, 31347, 31381, 48880060, 48880317, 510111, 748880060, 748880317, 7795, 7844, 901080, 914, 980060, 980317...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Acura ILX | L | 2354 | Front | 4 Cyl 2.4L | 144 |
Showing 1 - 10 of 64 products
Loading...