Image
Product
Price
- Oil Filter
- H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.6 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1973 - Fiat 128 | L | 1116 | 4 Cyl 1.1L | - |
- Oil Filter
- H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.6 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
021115351A, 102318005, 102618005, 111836, 11436936, 11711396, 121965, 1220185, 1220325, 1220893, 122B185, 122P185, 126385A1, 12662862, 129009, 12H3274, 132023, 1336188C1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1973 - Fiat 128 | L | 1290 | 4 Cyl 1.3L | 79 |
- Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
- Uni-Fit Joint Diameter 3.58 In.
- Product Attributes:
- Shaft End Inside Diameter: 0.93
- Boot Color: Black
- Package Contents: 1 Cv Joint Boot; 1 Cv Joint Grease Pack; 2 Camps
- Split Or Solid Type: Solid
- Boot Material: Neoprene
- Rib Quantity: 6
- Vented Boot: No
- Joint End Inside Diameter: 3.58
-
Features:
- Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution - this kit is a reliable replacement for original components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
This Part Fits the Following OEM/Substitute Numbers:
103-2892, 103-8020, 1032145, 1032237, 1032263, 1032265, 1032283, 1032487, 1032491, 1032507, 1032553, 1032620, 1032622, 1032624, 1032653, 1032654, 1032760, 1032762...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Fiat 128 | Front Outer |
- Champion Copper Plus- Boxed - RN9YC
- Resistor Type Gap 0.024in ; Plug Type RN9YC
- Champion Copper Plus 415 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Rn9yc
- Hex Size:
- 0.813
- 20.650
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 9
- Pre-Gap Size:
- 0.032
- 0.82
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14GR22, 4025, 4106117, 4225, 751-10292, 77-312-1, 7900, 7995, 8004, 98079-56846, AG040, AGR22, AGR22C, AGS22C, B6EBL11, BPR6EKA, BPR6ES, BPR6ES11...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1973 - Fiat 128 | L | 1116 | 4 Cyl 1.1L | - |
- Champion Copper Plus- Boxed - RN9YC
- Resistor Type Gap 0.025in ; Plug Type RN9YC
- Champion Copper Plus 415 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Rn9yc
- Hex Size:
- 0.813
- 20.650
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 9
- Pre-Gap Size:
- 0.032
- 0.82
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1973 - Fiat 124 | L | 1438 | 4 Cyl 1.4L | - |
- 13" TRICO Exact Fit Wiper Blade
- 9mm Hook, 3/16" Side Lock, 7mm Bayonet
- TRICO Exact Fit
- Provides original factory quality for vehicles with metal conventional wipers
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1973 - Fiat 124 | Front | Sedan |
- 13" TRICO (30 Series) Wiper Blade
- 9mm Hook, 3/16" Side Lock, 7mm Bayonet
- TRICO 30 Series
- Pre-attached universal adaptor fits most arm types directly
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1973 - Fiat 124 | Front | Sedan |
- NGK Standard Spark Plug
- Gap 0.025" OE Equivalent Design
- Standard Spark Plug
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Center Electrode Core Material: Copper
- Part Number: Bpr6es
- Hex Size: 13/16
- Reach: .75
- Center Electrode Tip Material: Nickel
- Stock Number: 7131
- Ground Electrode Tip Design: Standard
- Manufacturer Heat Range: 6
- Ground Configuration: Standard
- Pre-Gap Size: .036
- Resistance: 5000
- Insulator Height: 55.00
- Ground Electrode Core Material: Nickel
- NGK Spark Plugs (U.S.A.), Inc. is the largest OE supplier and manufacturer of spark plugs for domestic and import vehicles in North America. Its OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist. With over 80 years of automotive expertise NGK has built a reputation for quality and reliability; manufacturing spark plugs for virtually every automotive, motorcycle, marine and small engine application. We are committed to be the premier partner with our customers, while maintaining original equipment standards for the highest durability and operational performance. With state-of-the-art manufacturing, inventory and distribution facilities in North America and across the globe, NGK is dedicated to providing customers with world-class products and services.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0000-18-1690, 08983-999-010, 09482-00299, 09482-00487, 160693-78010, 1690-18-110, 1765084, 1835028T, 1835036T, 1Y01, 22401-V1416, 22401-V1486-PC, 22401-V1491, 22401-W9816, 22401-Y9216, 22401AA220, 2332, 241235602...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1973 - Fiat 124 | L | 1438 | 4 Cyl 1.4L | 88 |
- 15" TRICO Exact Fit Wiper Blade
- 9mm Hook, 7mm Bayonet
- TRICO Exact Fit
- Provides original factory quality for vehicles with metal conventional wipers
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1973 - Fiat 124 | Front | Coupe |
- 14" TRICO NeoForm Beam Blade
- 9mm Hook, 9x4 Hook
- TRICO NeoForm
- Exclusive dual-point coupler helps eliminate streaking
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1973 - Fiat 124 | Front | Coupe |
Showing 1 - 10 of 132 products
Loading...