Toyota Parts


Showing 1 - 10 of 139531 products
Image
SKU
Product
Rating
Price

CURT
  • Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Tacoma
  • 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 5500lbs. Weight Distributing; 550lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 45 Minutes
  • CURT 13323 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Tacoma
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 5000 Lbs.
    • Visibility: Concealed
    • Weight Carrying Capacity: 5000
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • WD Tongue Weight: 550
    • Drilling Required: No
    • Install Time: 45 Minutes
    • WC Tongue Weight: 500
    • Weight Distribution: 5500
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tacoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,500 lbs. WD and 550 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Toyota Tacoma V 3956 Rear 6 Cyl 4.0L Pre Runner 241

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Transmission Engine CID
1999 - Toyota Solara V 2995 Manual 6 Cyl 3.0L -

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2007 - Toyota Solara L 2362 Rear 4 Cyl 2.4L -

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2013 - Toyota 4Runner V 3956 Right 6 Cyl 4.0L 241

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - Toyota Solara V 2995 6 Cyl 3.0L -

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2008 - Toyota FJ Cruiser V 3956 Left 6 Cyl 4.0L 241

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2014 - Toyota Tundra V 5663 Rear Left 8 Cyl 5.7L 345

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal HM Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Heat Shield Attached: Yes
    • Body Width: 4.375
    • Overall Length: 13
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Heat Shield Included: Yes
    • Outlet Orientation: Straight
    • Body Shape: Round
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Air Tube Adaptable: No
    • Body Length: 9
    • Outlet Diameter: 2.25

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Toyota Prius L 1497 Front 4 Cyl 1.5L -

Truxedo
  • TruXport-05-15 Tacoma 6ft.
  • Black
  • Toyota Tacoma
  • TruXport(R) Tonneau Cover
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Cancer And Reproductive
      • Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Front Opening: No
    • Style: Roll-up Soft Cover
    • Install Time: 15 Minutes
    • Rails To Install: Yes
    • Low Profile: Yes
    • Actual Color: Black
    • Paintable: No
    • Works w/Toolbox: No
    • Key Lockable: No
    • Full Bed Access: No
  • Features:
    • Cover Sits 1.5 in. Above The Truck Bed
    • Providing Distinctive Good Looks
    • Dual Paddle Latches Easily Accessed At Both Sides Of The Truck
    • Securely Fastening The Cover To The Bed
    • No Drilling Or Special Tools Required
    • Quality Leather Grain Fabric
    • Helps Protect Your Cargo From The Harshest Of Elements
    • Integrated Pre-Set Tension Control
    • Dual-Latching System To Keep The Cover Tight
    • Made In The USA
    • 5-Year Warranty
  • TruXport is an attractive roll-up truck bed cover that includes top quality features and benefits with a price that won't break the bank. It's easy to install, and operation is simple. The TruXport mounts on top of the truck bed rails providing distinctive good looks that will truly complement your truck. Once installed, the pre-set tension control will help maintain the TruXport's great looks all year round.

Additional Fitment Information:
Vehicle Bed Bed Length Sub Model
2010 - Toyota Tacoma Fleetside 73.5 X-Runner

Truxedo
  • TruXport-05-15 Tacoma 6ft.
  • Black
  • Toyota Tacoma
  • TruXport® Tonneau Cover
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
    • Front Opening: No
    • Style: Roll-up Soft Cover
    • Install Time: 15 Minutes
    • Rails To Install: Yes
    • Low Profile: Yes
    • Actual Color: Black
    • Paintable: No
    • Works w/Toolbox: No
    • Key Lockable: No
    • Full Bed Access: No
  • Features:
    • Cover Sits 1.5 in. Above The Truck Bed
    • Providing Distinctive Good Looks
    • Dual Paddle Latches Easily Accessed At Both Sides Of The Truck
    • Securely Fastening The Cover To The Bed
    • No Drilling Or Special Tools Required
    • Quality Leather Grain Fabric
    • Helps Protect Your Cargo From The Harshest Of Elements
    • Integrated Pre-Set Tension Control
    • Dual-Latching System To Keep The Cover Tight
    • Made In The USA
    • 5-Year Warranty
  • TruXport is an attractive roll-up truck bed cover that includes top quality features and benefits with a price that won't break the bank. It's easy to install, and operation is simple. The TruXport mounts on top of the truck bed rails providing distinctive good looks that will truly complement your truck. Once installed, the pre-set tension control will help maintain the TruXport's great looks all year round.

Additional Fitment Information:
Vehicle Bed Bed Length Sub Model
2010 - Toyota Tacoma Fleetside 73.5 Base
Showing 1 - 10 of 139531 products

Loading...