Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 2.688 In. (68mm)
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | Fuel Delivery Type | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 2015 - Nissan Tiida | L | 1598 | HR16DE | GAS | 4 Cyl 1.6L | FI | Drive | Naturally Aspirated | 98 |
- Dorman DiRECT-FIT Tire Pressure Monitoring System Sensor
- Product Attributes:
- Mounting Location: Wheel Valve Stem Hole
- Mounting Method: Clamp In
- Mounting Hardware Included: Yes
- Package Contents: One Tire Pressure Monitor Sensor With Clamp In Valve Stem
- Frequency: 315
- Activation Type: Magnetic
- Housing Material: Plastic
-
Features:
- Direct replacement - this tire pressure monitoring system (TPMS) sensor is designed to match the fit and function of the original sensor on specified vehicles
- Ideal solution - this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
- Durable construction - this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This tire pressure monitoring system (TPMS) sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
20034, 20064, 20069, 20082, 20135, 20161, 28167, 407001AA0A, 407001AA0B, 407001AA0C, 407003AN0A, 407003AN0B, 407003AN0D, 40700JA00B, 40700JA00C, 40700JA01A, 40700JA01B, 40700JA01C...VIEW MORE
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2012 - Nissan Tiida | Mexico |
- Evaporative Emissions Canister Vent Valve
- Product Attributes:
- Package Contents: 1 Valve
- Vacuum Connector Diameter: 1/2 In
- Connector Quantity: 2
- Connector/Terminal Configuration: 2 Blade
- Housing Material: Plastic
-
Features:
- Direct replacement - this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment function at a lower price
- Quality tested - has undergone simulation and endurance testing to ensure proper fit and performance
- A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle's evaporative emissions system.
This Part Fits the Following OEM/Substitute Numbers:
14935AM600, 14935AM60A, 14935AM60B, CPV77, CVS67
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Nissan Tiida | L | 1798 | 4 Cyl 1.8L | - |
- Tire Pressure Monitoring System Service Kit
- Services factory equipped TPMS Sensors
- Product Attributes:
- Package Contents: 1 Valve Core; 1 Threaded Sleeve; 1 Cap; 1 Grommet
- Valve Core Material: Metal
- Valve Stem Included: No
- Mounting Type: Standard
- Cap Color: Gray
- Grommet Material: Rubber
- Cap Material: Plastic
-
Features:
- Ideal replacement - this TPMS sensor hardware kit matches the fit and function of the original equipment components
- Complete installation - each kit provides the hardware components required for complete TPMS sensor hardware replacement
- Trustworthy construction - these sensor hardware components are engineered with high quality materials
- Quality tested - kit components have undergone extensive testing to ensure proper function and long service life
- Tire pressure warnings a problem? This tire pressure monitoring system (TPMS) sensor hardware kit includes all replacement sensor hardware components for this TPMS-equipped vehicle: a valve stem core, a new rubber seal and a valve stem threaded neck and cap.
This Part Fits the Following OEM/Substitute Numbers:
20014, 2030K, TPM2030K
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2009 - Nissan Tiida | Mexico |
- Fuel Cap
- Vented Black Cap
- Standard
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-290315, 10838, 10838D, 10838Y, 10842, 11838, 11838Y, 12F60, 16447000030, 1644700030, 1644700130, 1664700030, 1664705800, 1711A004, 172511LA0B, 172511PA0B, 172515M000, 172519AA0A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Nissan Tiida | L | 1600 | 4 Cyl 1.6L | 98 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Nissan Tiida |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - Nissan Tiida |
- TPMS Aluminum Clamp-In Valve Stem For Dorman DiRECT-FIT Sensor
- Replacement Clamp-In Valve Kit Fits only Dorman DIRECT-FIT TPMS Sensors
- Product Attributes:
- Package Contents: Replacement Tpms Clamp-in Valve Stem For Dorman Sensors
-
Features:
- Direct replacement - the components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles
- Ideal solution - this kit contains reliable parts to replace original TPS components that have failed due to wear
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- The components in this tire pressure monitoring system valve kit are designed to match the original parts required to service the TPS on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2009 - Nissan Tiida | Mexico |
- Power Steering Oil Cooler
- Power Steering Oil Cooler
- Pwr Strg Oil Cooler
- Product Attributes:
- Depth IN: 0.750
- Height IN: 2.500
- Outlet Size IN: 0.375
- Connector Fitting: 3/8
- Fittings Included?: Included
- Hose Length FT: 4.500
- Length IN: 9.000
- Gasket / Seals?: Not Included
- Mounting Hardware?: Included
- Description: Power Steering Oil Cooler
- Hose Size Number: 11/32
- Contains Spring?: Not Included
- Row Quantity: 2
- With Electric Fan?: Not Included
- O.E. Replacement?: No
- Bracket?: Not Included
This Part Fits the Following OEM/Substitute Numbers:
1009, 11153019, 13213, 14866, 1534157, 212, 241009, 53019, 6919, 77430, 911009, CWK911009
Additional Fitment Information:
| Vehicle |
|---|
| 2008 - Nissan Tiida |
- W/A.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .807
- 20
- Outside Circumference:
- 1216
- 47.875
- OE Comparison Rating: Oe Performance
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
- 1203
- 47.37
- Rib Quantity: 6
- Cord Material: Polyester
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
11720ED80A, 11720ED80B, 11720ED80C, 11720EL00A, 12578001, 25-060473, 30757007, 31110RLVA02, 31251046, 4060473, 4060475, 473K6, 473K6MK, 475K6, 5060473, 5060473DR, 6G9N 8620 BB, 6K1200...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2013 - Nissan Tiida | L | 1798 | Accessory Drive | GAS | 4 Cyl 1.8L | - |
Showing 1 - 10 of 120 products
Loading...