Image
Product
Price
- Tapered Roller Bearing Cone and Cup Assembly
- Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1983 - Lincoln Mark VI | Front Inner | RWD |
- 18" TRICO Exact Fit Wiper Blade
- With hole on side of blade
- 9mm Hook, 3/16" Side Lock, 7mm Bayonet
- TRICO Exact Fit
- Provides original factory quality for vehicles with metal conventional wipers
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Lincoln Mark VI | Front |
- 18" TRICO (30 Series) Wiper Blade
- 9mm Hook, 9x4 Hook, 3/16" Side Lock, 7mm Bayonet
- TRICO 30 Series
- Pre-attached universal adaptor fits most arm types directly
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Lincoln Mark VI | Front |
- Bosch DirectConnect Wiper Blade
- DirectConnect
- Product Attributes:
- Length: 18
- Blade Material: Natural Rubber W/graphite
- Frame Material: Steel
- Heated (Wiper Blade): No
- Adapters Included: Yes
- Unit(s) per Car Qty (ORLY): 2
- Cases Per Pallet (ORLY): 92
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: No
- Blade Type: Bracket
-
Features:
- Dual steel tension springs supports the wiping edge for a consistent clean wipe
- Graphite-treated wiping edge reduces friction and noise
- Flow-through frame reduces blade lift-off
- Quick and easy installation
- All steel frame construction for dependable wiping
- Pluma limpiaparabrisas Bosch DirectConnect
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Lincoln Mark VI | Front |
- 18" TRICO Tech Beam Blade
- 9mm Hook, 9x4 Hook, 3/16" Side Lock, 7mm Bayonet, Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- TRICO Tech
- All-weather durability
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Lincoln Mark VI | Front |
- Champion Copper Plus- Boxed - RV15YC4
- Gap 0.050in OE Type ; Plug Type RV15YC4
- Champion Copper Plus 18 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Rv15yc4
- Hex Size:
- 0.625
- 15.880
- Reach: 0.441
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 15
- Pre-Gap Size:
- 0.045
- 1.15
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14F42, 14F52, 14RF42, 3851859, 3851861, 3851868, 3874934, 41-905, 4339413, 43TS, 7985, 7986, 875803, AF52, AF52C, ARF52, ASF52, ASF52C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Lincoln Mark VI | V | - | 8 Cyl 5.0L | 302 |
- Bosch Evolution Wiper Blade
- Evolution
- Product Attributes:
- Adapters Included: No
- Quick Connect Hardware Included: Yes
- Frame Color: Black
- Wiper Blade Design: All-season
- Attached Spoiler / Aerofoil: Yes
- Blade Material: Natural Rubber W/graphite
- Heated (Wiper Blade): No
- Blade Type: Beam
-
Features:
- Patented beam technology with dual tension springs provide even force distribution for optimal wiping performance
- Blended natural rubber with graphite treated wiping edge reduces friction and improves wiping durability
- Quick and easy installation with pre-mounted adapter
- An aerodynamic wind spoiler to create a downward force which ensures consistent wiping at high speeds
- Double locking connector provides quick, easy and secure connection
- Pluma Limpiaparabrisas Bosch Evolution
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Lincoln Mark VI | Front |
- 18" TRICO NeoForm Beam Blade
- 9mm Hook, 9x4 Hook, 3/16" Side Lock, 7mm Bayonet
- TRICO NeoForm
- Exclusive dual-point coupler helps eliminate streaking
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1982 - Lincoln Mark VI | Front |
- Class 3 Trailer Hitch; 2in. Receiver; Select Ford; Lincoln; Mercury Sedans
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 13707 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford; Lincoln; Mercury Sedans
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Country Squire, Ford Crown Victoria, Lincoln Mark VI, Lincoln Town Car, Mercury Grand Marquis and Mercury Marauder (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1982 - Lincoln Mark VI | V | - | Rear | 8 Cyl 5.0L | 302 |
- High Pressure Monotube Gas Shock
- Monotube Performance Upgrade
- Gas-a-just
- Product Attributes:
- Feature and Benefit 5: Fluid Leaking Can Be A Cause Of Shock Failure, The Kyb Gas-a-just Has An Ultra-smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- Feature and Benefit 4: High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Feature and Benefit 7: Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The Kyb Gas-a-just Helps Keep Electronic Safety Systems Performing As Designed.
- Upper Mount Type: S1
- Feature and Benefit 6: The Higher Gas Pressure Of The Kyb Gas-a-just Responds Quickly To Improve Steering Response
- Compressed Length: 9.65
- Dust Cover Included: N
- Feature and Benefit 1: Adds Up To 25% More Damping Performance Over Original Equipment Shocks
- B-stop: N
- Feature and Benefit 3: Gas-a-just Monotubes Include Additional Damping Over Oe Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- Feature and Benefit 2: Components And Valving Designed Specifically For Classic Cars
- Lower Mount Type: E3(51.6x82x20)
- R-stop: Y
- Extended Length: 14.57
- Stroke Length: 4.92
- The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5906, 69675
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Lincoln Mark VI | Front |
Showing 1 - 10 of 532 products
Loading...