2002 Volkswagen Golf Catalytic Converter Parts
Choose your Engine for your 2002 Volkswagen Golf
Image
Product
Price
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Body Width: 4.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | V | 2771 | 6 Cyl 2.8L | - |
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.25
- Outlet Attachment: Weld-on
- Body Width: 4.25
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | L | 1781 | 4 Cyl 1.8L | - |
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal OEM GRADE Federal (Excludes California)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.25
- Outlet Attachment: Weld-on
- Body Width: 4.25
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | L | 1781 | 4 Cyl 1.8L | - |
- HM Grade Direct-Fit Catalytic Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 44.5
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 2
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Clamp-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23773. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2000-2005 Volkswagen Jetta, 1999-2004 Volkswagen Beetle, and more, this direct-fit catalytic converter also interchanges with OE parts 1J0 254 506 SX and 1J0 254 509 X, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
1J0 254 501 BX, 1J0 254 501 CX, 1J0 254 501 FX, 1J0 254 502 GX, 1J0 254 502 JX, 1J0 254 502 K, 1J0 254 506 SX, 1J0 254 507 AX, 1J0 254 509 X, 1J0254501BX, 1J0254502GX, 1J0254502JX, 1J0254506SX, 1J0254509X, 1J1 253 058 AX, 1J1 253 058 BX, 1J1 253 058 KX, 1J1 253 058 LX...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | L | 1781 | 4 Cyl 1.8L | - |
- HM Grade Direct-Fit Catalytic Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 45.75
- Body Type: Spun
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 1
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Clamp-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23774. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1999-2002 Volkswagen Jetta and 1999-2002 Volkswagen Golf, this direct-fit catalytic converter also interchanges with OE parts 1HM 131 701 HX and 1J0 253 058 TX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
1HM 131 701 HX, 1HM131701HX, 1J0 253 058 TX, 1J0 254 500 N, 1J0 254 501 J, 1J0 254 502 P, 1J0 254 507 KX, 1J0253058TX, 1J0254501J, 1J0254507KX
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Volkswagen Golf | V | 2771 | AFP | 6 Cyl 2.8L | - |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Metallic Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 41.125
- Body Type: Spun
- Inlet Mounting Hardware Included: Yes
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 6
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Clamp-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Direct-Fit Catalytic Converter 16426. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2000-2005 Volkswagen Jetta, 1999-2004 Volkswagen Beetle, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal.
This Part Fits the Following OEM/Substitute Numbers:
1J0 254 501 BX, 1J0 254 502 GX, 1J0 254 502 JX, 1J2 253 058 RX
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | L | 1781 | 4 Cyl 1.8L | - |
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal OEM GRADE Federal (Excludes California)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Body Width: 4.25
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | V | 2771 | 6 Cyl 2.8L | - |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 13
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | L | 1896 | 4 Cyl 1.9L | 116 |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 13
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Volkswagen Golf | V | 2771 | Front | AFP | 6 Cyl 2.8L | - |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit OEM GRADE Federal (Excludes California)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2.25
- Outlet Attachment: Clamp-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
MF#51759
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Volkswagen Golf | L | 1896 | 4 Cyl 1.9L | 116 |
Showing 1 - 10 of 19 products
Loading...