2006 Mercedes-Benz SL65 AMG Disc Brake Rotor - Front Brembo

  • Sold Each. Purchase quantity 1 for 1 wheel

Additional Fitment Information:
Vehicle Position
2006 Mercedes-Benz SL65 AMG Front
20 In Stock
Best Price:

$675.66 USD
$810.79 USD
Brand Brembo
Part # BRE1778022
Condition New
Warehouse A

Brembo

  • Composite UVCoated High Carbon
  • 390mm - Drilled
  • Rear
  • BREMBO S.p.A.
    Brembo, headquartered in Italy, is a world leader and design innovator of high-performance braking systems. Brembo supplies brake systems to the most prestigious brands of passenger cars and motorcycles worldwide.
    Brembo Ignition Wire Set

    The Brembo ignition wire set utilizes OE connectors and a copper core silicone wire that is waterproof, resistant to corrosion, high temperatures and vibration.

    • OE-Equivalent.
    • OEM style connectors for easy Installation.
    • Resistant to high temperatures, corrosion and vibration.
    • Ignition noise suppressed.
    Warranty Information: 12 Month - 12,000 mile limited warranty against defects in material and workmanship.



    Brembo Brake Disc

    Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

    Easy Check:
    Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

    High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

    PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.
    • OE-Equivalent and a direct fit replacement
    • Made of special cast iron with high carbon content
    • Pillar Venting Technology (Vented Rotors Only)
    • Easy Check wear indicator system
    • Provides a higher friction coefficient.
    • Resistant to vibrations and noise.
    TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

    Warranty Information: 12 month - 12,000 mile limited warranty.



    Brembo Cross Drilled Brake Disc

    The Brembo Sport Cross Drilled brake discs are an OE-quality replacement that drastically improves the performance and the look of the vehicle without having to change any of the remaining braking components and are fully compatible with the vehicles hubs, calipers and wheels.

    The Brembo Sport discs provide excellent performance in both day to day as well as more aggressive styles of driving and are highly recommended when using a performance or racing style brake pad or the vehicle is submitted to extreme braking duties such as towing or hauling heavy loads.
    • OE-Equivalent and a direct fit replacement.
    • Racing inspired Cross Drilled or Slotted Rotors
    • Replaces the vehicle’s O.E. rotors without any modifications.
    • Improved initial pad “bite” and break in
    • Adds bold, aggressive appearance to the vehicle
    • 40% better resistance to cracking than OE discs.
    • Made of special cast iron with high carbon content.
    • Provides a higher friction coefficient.
    • Resistant to vibrations and noise.
    • Reduces operating temperatures and fade
    Warranty Information: 12 month - 12,000 mile limited warranty.



    Brembo Brake Disc - Anti Corrosion Coated

    Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

    Easy Check:
    Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

    High Carbon: With their optimised thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

    Anti-Corrosion Coating: Brembo coated discs are protected by a special anti-corrosion coating on the hat and outer rim of the rotor which preserves the original visual appearance and functional characteristics, while also saving time during installation as the disc no longer requires cleaning and degreasing. These discs are ideal for vehicle with alloy wheels and for motorists for whom attention to detail is a prerequisite.

    PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.
    • OE-Equivalent and a direct fit replacement
    • Made of special cast iron with high carbon content
    • Pillar Venting Technology (Vented Rotors Only)
    • Easy Check wear indicator system
    • Provides a higher friction coefficient.
    • Resistant to vibrations and noise.
    TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

    Warranty Information: 12 month - 12,000 mile limited warranty.



    Brembo Sport Brake Disc Set

    The Brembo sport disc set provide the race-bred engineering of cross drilling or gas slotting to provide multiple paths to disperse built-up heat and gasses created under sever braking conditions.

    The Brembo sport rotors are engineered to improve pad bite, improve wet weather performance, continuously refresh the brake pad and prevent gas from building up between the brake pad and rotor.

    The Brembo Sport discs are premium OEM replacement units that meet or exceed all vehicle manufacturers specifications and tolerances. They are fully compatible with stock calipers wheels and other chassis components, easily mounting onto the vehicle.

    The Brembo rotors are specially coated for corrosion resistance to help eliminate rust and to offer a bold, aggressive appearance to enhance the look of the vehicles road wheels.
    • The drilled and slotted design prevents the formation of a film of water on the disc surface in case of rain.
    • 100% compatible with the standard components.
    • The discs are designed for top performance and minimum additional wear to the brake pads.
    • The protective galvanizing treatment improves the disc's appearance and prevents corrosion.
    • The discs used are produced with high carbon cast iron.
    Warranty Information: 12 month - 12,000 mile limited warranty.



    Brembo Cross Drilled Sport Brake Set

    The Brembo Cross Drilled Rotors provide the race-bred engineering of cross drilling to provide multiple paths to disperse built-up heat and gasses created under sever braking conditions.

    The Brembo Sport discs are premium OEM replacement units that meet or exceed all vehicle manufacturers specifications and tolerances. They are fully compatible with stock calipers wheels and other chassis components, easily mounting onto the vehicle.

    The Cross-Drilled Style Rotors will operate at a slightly cooler temperature than the slotted style because of the added air surface created by the drill pattern. The rotor design was engineered by Brembo to improve pad bite, improve wet weather performance, continuously refreshes the brake pad and prevents gas from building up between the brake pad and rotor.
    • Cross Drilled design prevents the formation of a film of water on the disc surface in case of rain.
    • 100% compatible with the standard components.
    • The disc hole shape is designed for top performance and minimum additional wear to the brake pads.
    • The protective galvanizing treatment improves the disc's appearance and prevents corrosion.
    • The discs used are produced with high carbon cast iron.
    Warranty Information: 12 month - 12,000 mile limited warranty.



    Brembo Gas Slotted Sport Brake Set

    Brembo gas slotted brake rotors are for drivers who want to improve the looks and performance of their vehicles original braking system without having to change additional brake components.

    Brembo gas slotted brake rotors provide the race-bred engineering of machining multiple slots into the rotors surfaces to continuously refresh the brake pad and prevent gas from building up between the brake pad and rotor.

    The gas slotted rotors are recommended when using racing brake pad materials or the vehicle is submitted to extreme braking duties such as towing or hauling heavy loads.

    The Brembo Sport discs are premium OEM replacement units that meet or exceed all vehicle manufacturers specifications and tolerances. They are fully compatible with stock calipers wheels and other chassis components, easily mounting onto the vehicle.
    • The Gas Slotted design prevents the formation of a film of water on the disc surface in case of rain.
    • 100% compatible with the standard components.
    • The disc slot is designed for top performance and minimum additional wear to the brake pads.
    • The protective galvanizing treatment improves the disc's appearance and prevents corrosion.
    • The discs used are produced with high carbon cast iron.
    Warranty Information: 12 month - 12,000 mile limited warranty.



    Packaging

    length
    17.00
    width
    16.00
    height
    4.00
    weight
    31.75
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.

    Loading...