Image
Product
Price
- Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Gasket Included: No
- Outlet Gasket Included: Yes
- Inlet Diameter: 2.5
- MFWeb: Yes
- Heat Shield Attached: Yes
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2001 - Ford Focus | L | 1989 | Manual | 4 Cyl 2.0L | 3 | 121 |
- 2nd Or 3rd Seat Floor Mats
- Black; 2 pc.; Does Not Cover Hump May Require Trimming For Correct Fit/Trim Guides Molded In Mat
- HD 2ND OR 3RD SEAT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Ford Focus | Rear |
- Replacement Air Filter
- Panel; H-1.188 in.; L-13.438 in.; W-5.25 in.
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Width: 5.250 In.
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Machine Washable: Yes
- Product Box Height: 13.560 In. (345mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 1.750 In. (44 Mm)
- Product Box Length: 7.720 In. (196mm)
- Outside Diameter: Oem
- Item Height: 1.188 In. (30mm)
- Prop 65 (C, R or CR): Cr
- Package Content: 1
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Outside Width: 5.313 In. (135mm)
- Package Contents: 1 Air Filter
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Overall Length: N/a
- Package Quantity: 1
- Shape: Panel
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 1.03 Oz (30 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Outside Length: 13.438 In. (341mm)
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
10129620D, 1K01269620D, 1K0129607AG, 1K0129607AS, 1K0129607D, 1K0129620, 1K0129620D, 1K0129620E, 1K0129620L, 1K0129620ZC, 1K129620D, 1KD129620A, 1L0129620E, 2820865, 3320865, 3C0129620D, 42295, 49013...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2013 - Ford Focus | L | 1999 | GAS | 4 Cyl 2.0L | ST | 9 | Turbocharged | 122 |
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2003 - Ford Focus | L | - | 4 Cyl 2.3L | ZX3 | 140 |
- ANCO Conventional 31 Series Wiper Blades 22
- Original Blade Type
- ANCO 31-Series Wiper Blade (Pack of 1)
- 31-Series
- Product Attributes:
- Adapters Required: No
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: J-hook: 9x3mm, 9x4mm; Classic Side-pin: 1/4"
- Blade Material: Duraklear - Natural Rubber
- Frame Material: Metal; Plastic
- Blade Type: Conventional/bridge
- Refillable: Yes
- The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
22-1, 22-4, 22-51, 22-54, 22-59, 22-9, 23-1, 23-51, 30-221, 350-221, 358-220, 359-230, 3722, 38-220, 39-221, 39-230, 40322, 40722A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Ford Focus | Front Left |
- 22" TRICO Exact Fit Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4" Side Lock
- TRICO Exact Fit
- Provides original factory quality for vehicles with metal conventional wipers
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Ford Focus | Left |
- 22" TRICO Tech Beam Blade
- 9mm Hook, 9x4 Hook, 1/4" Side Lock, Side Pin (17mm), Pinch Tab, Pinch Tab Button, Push Button (22mm), Push Button (19mm)
- TRICO Tech
- All-weather durability
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Ford Focus | Left |
- Re-Use Exsisting OE Bolt and Washer
- Product Attributes:
- : 30
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Flat: Y
Additional Fitment Information:
| Vehicle | Position | Engine VIN |
|---|---|---|
| 2002 - Ford Focus | Grooved Pulley | P |
- Re-Use Exsisting OE Bolt and Washer
- Product Attributes:
- : 30
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Flat: Y
This Part Fits the Following OEM/Substitute Numbers:
06003045, 10129561, 10141997, 10179211, 10187650, 12552361, 12555244, 12555245, 12555609, 12557819, 12564505, 12564510, 12580771, 12580773, 15662645, 16603-0W030, 17540-77EA1, 1FP0-32-700...VIEW MORE
Additional Fitment Information:
| Vehicle | Engine VIN |
|---|---|
| 2000 - Ford Focus | P |
- Re-Use Exsisting OE Bolt and Washer
- Product Attributes:
- : 30
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Flat: Y
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2003 - Ford Focus | L | 1989 | Air Conditioning Bypass | 4 Cyl 2.0L | P | 121 |
Showing 1 - 10 of 5388 products
Loading...