Image
Product
Price
- Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Gasket Included: No
- Outlet Gasket Included: Yes
- Inlet Diameter: 2.5
- MFWeb: Yes
- Heat Shield Attached: Yes
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2001 - GMC Jimmy | V | - | Rear | 4 | 6 Cyl 4.3L | RWD | 262 |
- 2nd Or 3rd Seat Floor Mats
- Black; 2 pc.; Does Not Cover Hump May Require Trimming For Correct Fit/Trim Guides Molded In Mat
- HD 2ND OR 3RD SEAT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2001 - GMC Jimmy | Rear | 4WD |
- Universal Catalytic Converter - 3.00in.
- California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Heat Shield Attached: Yes
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Outlet Diameter: 3
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2001 - GMC Jimmy | V | - | 4 | 6 Cyl 4.3L | 4WD | 262 |
- Universal Catalytic Converter - 3.00in.
- Federal Emissions Equipped Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Heat Shield Attached: Yes
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Outlet Diameter: 3
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2001 - GMC Jimmy | V | - | 4 | 6 Cyl 4.3L | 4WD | 262 |
- ANCO Conventional 31 Series Wiper Blades 20
- Original Blade Type
- ANCO 31-Series Wiper Blade (Pack of 1)
- 31-Series
- Product Attributes:
- Adapters Required: No
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: J-hook: 9x3mm, 9x4mm; Classic Side-pin: 1/4"
- Blade Material: Duraklear - Natural Rubber
- Frame Material: Metal; Plastic
- Blade Type: Conventional/bridge
- Refillable: Yes
- The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
20-1, 20-2, 20-3, 20-4, 20-51, 20-52, 20-53, 20-54, 20-58, 20-59, 20-8, 20-9, 358-200, 358-201, 359-210, 3719, 38-200, 38-201...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - GMC Jimmy | Front |
- 20" TRICO Exact Fit Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4" Side Lock
- TRICO Exact Fit
- Provides original factory quality for vehicles with metal conventional wipers
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - GMC Jimmy | Front |
- Re-Use Exsisting OE Bolt and Washer
- Product Attributes:
- : 30
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Flat: Y
This Part Fits the Following OEM/Substitute Numbers:
06003045, 10129561, 10141997, 10179211, 10187650, 12552361, 12555244, 12555245, 12555609, 12557819, 12564505, 12564510, 12580771, 12580773, 15662645, 16603-0W030, 17540-77EA1, 1FP0-32-700...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - GMC Jimmy | Smooth Pulley |
- Class 3 Hitch; 2in. Receiver; Select Blazer; Jimmy; Bravada (Square Tube Frame)
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13020 Class 3 Trailer Hitch; 2-Inch Receiver; Square Tube Frame; Fits Select Chevrolet Blazer; GMC Jimmy; Oldsmobile Bravada
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Blazer, GMC Jimmy and Oldsmobile Bravada (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2001 - GMC Jimmy | V | - | Rear | 6 Cyl 4.3L | 262 |
- Spectre Differential Cover
- Chrome Plated Steel; w/o Drain Plug; Includes /Gasket/10 Triple Chrome Plated Bolts
- Spectre s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Spectre s covers add an extra layer of protection to the vehicle s underside.
- Differential Cover
- Product Attributes:
- Automotive Item Grade: High Performance
- Bolt Quantity: 10
- Package Material: Plastic Other
- Mounting Hardware Included: Yes
- Package Contents: 1 Differential Cover, 1 Gasket, 10 Bolts
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Item Weight: 2.600 Lbs. (1.2 Kg)
- Package Type: Blisterpack
- Prop 65 (C, R or CR): Cr
-
Features:
- Made To OEM Specifications
- 10 Bolt Design
- Includes Chrome Bolts And Gasket
- Triple Chrome-Plated Steel For A Lasting Shine
- Precision Engineered For A Perfect Fit
- Spectre's Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre's covers add an extra layer of protection to the vehicle's underside. Featuring a 10-bolt design and includes a gasket, this differential cover is designed to fit 1973-1977 Chevy Camaro with 8.5 inch ring gear, 1982-1992 Camaro Z28/IROC/Firebird Transmission Am, 1993-2002 Chevy Camaro/Pontiac Firebird V8, 1994-1996 Chevy Impala SS, 1988-2002 Chevy/GMC Pickup/Blazer/Jimmy/Suburban 1/2 ton two or four wheel drive rear differentials. Includes 10 SAE standard chrome bolts for installation. You'll need to supply your own bolts if your application requires metric bolts.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - GMC Jimmy |
- Spectre Differential Cover
- Chrome Plated Steel; w/o Drain Plug; Includes Differential Cover/Gasket/10 Triple Chrome Plated Bolts
- Spectre s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Spectre s covers add an extra layer of protection to the vehicle s underside.
- Differential Cover
- Product Attributes:
- Automotive Item Grade: High Performance
- Bolt Quantity: 10
- Package Material: Plastic Other
- Mounting Hardware Included: Yes
- Package Contents: 1 Differential Cover, 1 Gasket, 10 Bolts
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Item Weight: 2.600 Lbs. (1.2 Kg)
- Package Type: Blisterpack
- Prop 65 (C, R or CR): Cr
-
Features:
- Made To OEM Specifications
- 10 Bolt Design
- Includes Chrome Bolts And Gasket
- Triple Chrome-Plated Steel For A Lasting Shine
- Precision Engineered For A Perfect Fit
- Spectre's Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre's covers add an extra layer of protection to the vehicle's underside. Featuring a 10-bolt design and includes a gasket, this differential cover is designed to fit 1973-1977 Chevy Camaro with 8.5 inch ring gear, 1982-1992 Camaro Z28/IROC/Firebird Transmission Am, 1993-2002 Chevy Camaro/Pontiac Firebird V8, 1994-1996 Chevy Impala SS, 1988-2002 Chevy/GMC Pickup/Blazer/Jimmy/Suburban 1/2 ton two or four wheel drive rear differentials. Includes 10 SAE standard chrome bolts for installation. You'll need to supply your own bolts if your application requires metric bolts.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - GMC Jimmy |
Showing 1 - 10 of 1795 products
Loading...