1998 Toyota Tacoma Parts
Choose your Submodel for your 1998 Toyota Tacoma
Image
Product
Price
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Heat Shield Attached: Yes
- Body Width: 4.375
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2.25
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1998 - Toyota Tacoma | V | 3378 | Rear | 6 Cyl 3.4L | 4WD | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Tacoma
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 60 Minutes
- CURT 13013 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Tacoma
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 60 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tacoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Toyota Tacoma | L | 2694 | Rear | 4 Cyl 2.7L | Pre Runner | - |
- 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black
- Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black;
- Cut-Out™ Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
-
Features:
- Installation Drilling And/Or Cutting Required
- Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
- Limited Lifetime Warranty
- Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
- Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
- Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
- 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
- Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
- For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.
Additional Fitment Information:
| Vehicle | Position | Bed | Sub Model | Drive Type |
|---|---|---|---|---|
| 1998 - Toyota Tacoma | Front and Rear | Fleetside | SR5 | 4WD |
- Cut-Out™ Fender Flares
- 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black
- Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black;
- Cut-Out(TM) Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
-
Features:
- Installation Drilling And/Or Cutting Required
- Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
- Limited Lifetime Warranty
- Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
- Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
- Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
- 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
- Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
- For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.
Additional Fitment Information:
| Vehicle | Position | Bed | Sub Model | Drive Type |
|---|---|---|---|---|
| 1998 - Toyota Tacoma | Front and Rear | Fleetside | SR5 | 4WD |
- Black Steel; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately; 10.75 in. Mounting Depth
- Safari Bull Bar; Black Steel; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately; 10.75 in. Mounting Depth;
- Safari Bull Bar
- Product Attributes:
- Design: One Piece
- WARNING CA Proposition 65: Yes
- Construction: Stainless Steel
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
-
Features:
- 2 in. Diameter Bar
- Welded Light Mounting Tabs
- Universal Bars
- No Drill Installation
- 5 Year Warranty
- The Safari Light Bar transforms the look of compact mid-size trucks and SUVs giving them rugged but not overpowering countenance. Made in mild steel with black powder coat finish.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1998 - Toyota Tacoma | Front | Pre Runner |
- Black Steel; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately; 10.75 in. Mounting Depth Black~Requires Installation Kit 30-1105
- Safari Bull Bar; Black Steel; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately; 10.75 in. Mounting Depth;
- Safari Bull Bar
- Product Attributes:
- Design: One Piece
- WARNING CA Proposition 65: Yes
- Construction: Stainless Steel
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
-
Features:
- 2 in. Diameter Bar
- Welded Light Mounting Tabs
- Universal Bars
- No Drill Installation
- 5 Year Warranty
- The Safari Light Bar transforms the look of compact mid-size trucks and SUVs giving them rugged but not overpowering countenance. Made in mild steel with black powder coat finish.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Toyota Tacoma | Front |
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14 Premium Oil Filter w/Wrench Off Nut; Spin On
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Toyota Tacoma | L | 2438 | 4 Cyl 2.4L | - |
- Replacement Air Filter
- Panel; H-1.313 in.; L-9.563 in.; W-8.125 in.
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Width: 8.125 In.
- Item Weight: 1.800 Lbs. (0.8 Kg)
- Machine Washable: Yes
- Product Box Height: 15.060 In. (383mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 2.340 In. (60 Mm)
- Product Box Length: 11.060 In. (281mm)
- Outside Diameter: Oem
- Item Height: 1.313 In. (33mm)
- Prop 65 (C, R or CR): Cr
- Package Content: 1
- Top Style: Open
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Inner Wire: No
- Outside Width: 8.125 In. (206mm)
- Package Contents: 1 Air Filter
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Overall Length: N/a
- Package Quantity: 1
- Shape: Panel
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 1.52 Oz (45 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Outside Length: 9.563 In. (243mm)
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
1780107020, 1780146060, 21901, 2820054, 46109, 6109, 834659, 88109, A1245, A1297, A1316C, A34840, A34886, AF361, AF4886, AF7867, CA6690, CA7626...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Toyota Tacoma | V | 3378 | 6 Cyl 3.4L | - |
- Front Floor Mats
- Black; 2 pc. May Require Trimming For Correct Fit/Trim Guides Molded In Mat
- HD FRONT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 1998 - Toyota Tacoma | Front | Extended Cab Pickup |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2
- Mounting Hardware Included: Yes
- Outlet Attachment: Bolt-on
- Air Tube Adaptable: No
- Overall Length: 12.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
17410-02110, 17410-11690, 17410-11700, 17410-16880, 17410-1A010, 1741002110, 1741011690, 1741011700, 1741016880, 174101A010, 18450-01060, 18450-01070, 18450-01080, 18450-01090, 18450-01100, 18450-01110, 18450-11160, 18450-16050...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Toyota Tacoma | L | 2438 | 4 Cyl 2.4L | - |
Showing 1 - 10 of 2375 products
Loading...