Steering Shaft Steering Parts
Image
Product
Price
- Intermediate Steering Shaft
- Product Attributes:
- Diameter: 0.997
- Mounting Hardware Included: No
- Package Contents: 1 Steering Shaft
- Length: 14.2
- Installation Instructions Included: No
- Spline Quantity: 0
-
Features:
- Precise fit - this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested - each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance - built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant - salt spray testing and premium coating help ensure future longevity
- This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
This Part Fits the Following OEM/Substitute Numbers:
19149105, 19153614, 19329330, 425176, 88965505, 89060582, JCSI00, SK111014
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Chevrolet Avalanche 2500 | Upper Intermediate |
- Intermediate Steering Shaft
- U-Joint
- Product Attributes:
- Mounting Hardware Included: No
- Package Contents: 1 Steering Shaft
- Length: 1.42
- Installation Instructions Included: No
- Spline Quantity: 27
-
Features:
- Precise fit - this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested - each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance - built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant - salt spray testing and premium coating help ensure future longevity
- This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
This Part Fits the Following OEM/Substitute Numbers:
4526033031, JCCA92
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - Lexus ES300 | Lower |
- Steering Shaft; Telescopic; Steel; 1979-1993 Dodge Truck
- Telescopic; Steel; Extreme Duty Version w/Two Billet Steel Universal Joints
- 1979-1993 Dodge truck heavy duty telescopic steel steering shaft. Connects from factory column to steering box. Extreme duty version with two billet steel universal joints.
- Steering Shaft Assembly
- Product Attributes:
- Universal Joint Quantity: 2
- Diameter: 1.000 In.
- End 2 Type: 0.750 In. 36-spline
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Length: 32.000 In.
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
- End 1 Type: 0.750 In. 36-spline
- Universal Joints Included: Yes
-
Features:
- Steering Shaft Assembly
- Two-joint Steering Assembly. Use this assembly if you use your truck for very rough off-roading and worry about the rag joint failing. This Borgeson replacement eliminates both the factory flex joint and the rag joint with a second u-joint. You must verify that the rag joint flange can be removed from the column shaft before ordering.
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Dodge D100 |
- Steering Shaft; Telescopic; Steel; 1979-1993 Dodge Truck
- Telescopic; Steel; Heavy Duty; Includes Rag Joint Flange And Billet Steel Universal Joint
- 1979-1993 Dodge Truck heavy duty telescopic steel steering shaft. Connects from factory column to steering box. Includes rag joint flange and billet steel universal joint.
- Steering Shaft Assembly
- Product Attributes:
- Universal Joint Quantity: 1
- Diameter: 1.000 In.
- End 2 Type: 3.250 In. Rag Joint Flange
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Length: 26.250 In.
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
- End 1 Type: 0.750 In. 36-spline
- Universal Joints Included: Yes
-
Features:
- Steering Shaft Assembly
- This Borgeson replacement assembly incorporates a needle bearing u-joint, a flanged end to accept the OEM rag joint, and a telescoping shaft which will correct the classic Dodge "steering wander". The telescoping shaft is a safety feature not found in the stock OEM assembly and it will accommodate 3 in. aftermarket body lift kits. Replacement rag joint available.
Additional Fitment Information:
| Vehicle |
|---|
| 1979 - Dodge D200 |
- Steering Shaft; Telescopic; Steel; 1995-2002 Dodge Truck
- Telescopic; Steel; With Vibration Reducer; Heavy Duty; Includes One Billet Universal Joint And Vibration Reducer Universal Joint
- 1995-2002 Dodge truck heavy duty telescopic steel steering shaft. Connects from factory column to steering box. Includes one billet universal joint and vibration reducer universal joint.
- Steering Shaft Assembly
- Product Attributes:
- Universal Joint Quantity: 2
- Diameter: 1.000 In.
- End 2 Type: 0.750 In. Dd
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Length: 30.000 In.
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
- End 1 Type: 0.750 In. 30-spline
- Universal Joints Included: Yes
-
Features:
- Steering Shaft Assembly
- This Borgeson replacement assembly incorporates a needle bearing u-joint on one end of a telescoping shaft and a vibration reducer/u-joint on the other. The telescoping shaft accommodates 3 in. aftermarket body lift kits. These steering assemblies are easy to install with common hand tools. In about an hour, your truck will have vastly improved steering characteristics.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1999 - Dodge Ram 1500 | ST |
- Steering Shaft; Telescopic; Steel; 2003-2008 Dodge Truck
- Telescopic; Steel; With Vibration Reducer; Heavy Duty; Includes One Billet Universal Joint And Vibration Reducer Universal Joint
- 2003-2008 Dodge 2500/3500 4WD heavy duty telescopic steel steering shaft. Connects from factory column to steering box. Includes one billet universal joint and vibration reducer universal joint. Also fits 2003-2006 1500 4WD Mega Cab.
- Steering Shaft Assembly
- Product Attributes:
- Universal Joint Quantity: 2
- Diameter: 1.000 In.
- End 2 Type: 0.750 In. Dd
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Length: 36.000 In.
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
- End 1 Type: 0.750 In. 36-spline
- Universal Joints Included: Yes
-
Features:
- Steering Shaft Assembly
- This Borgeson replacement assembly incorporates a needle bearing u-joint on one end of a telescoping shaft and a vibration reducer/u-joint on the other. The telescoping shaft accommodates 3 in. aftermarket body lift kits. These steering assemblies are easy to install with common hand tools. In about an hour, your truck will have vastly improved steering characteristics.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2005 - Dodge Ram 2500 | 4WD |
- Steering Shaft; Telescopic; Steel; 1976-1986 Jeep CJ; Power Steering
- Telescopic; Steel; Heavy Duty
- 1976-1986 Jeep CJ heavy duty telescopic steel steering shaft. Connects from factory column to steering box. For Jeeps with power steering.
- Steering Shaft Assembly
- Product Attributes:
- Universal Joint Quantity: 2
- Diameter: 1.000 In.
- End 2 Type: 1.000 In. 48-spline
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Length: 39.000 In.
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
- End 1 Type: 0.8125 In. 36-spline
- Universal Joints Included: Yes
-
Features:
- Steering Shaft Assembly
- Jeep's original steering shaft assembly was not designed for the added stress of body lifts and oversize tires. Borgeson's replacement assembly has a telescoping shaft with two precision needle bearing u-joints. The steering assembly is easy to install with common hand tools. Once installed, you will experience much tighter and more responsive steering.
Additional Fitment Information:
| Vehicle | Steering System |
|---|---|
| 1980 - Jeep CJ7 | Power |
- Steering Shaft; Telescopic; Steel; 1976-1986 Jeep CJ; Power Steering
- Telescopic; Steel; Heavy Duty; Includes Vibration Reducer Upgrade
- 1976-1986 Jeep CJ heavy duty telescopic steel steering shaft. Connects from factory column to steering box. For Jeeps with power steering. Includes vibration reducer upgrade.
- Steering Shaft Assembly
- Product Attributes:
- Universal Joint Quantity: 2
- Diameter: 1.000 In.
- End 2 Type: 1.000 In. 48-spline
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Length: 40.000 In.
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
- End 1 Type: 0.8125 In. 36-spline
- Universal Joints Included: Yes
-
Features:
- Steering Shaft Assembly
- Jeep's original steering shaft assembly was not designed for the added stress of body lifts and oversize tires. Borgeson's replacement assembly has a telescoping shaft with two precision needle bearing u-joints. The steering assembly is easy to install with common hand tools. Once installed, you will experience much tighter and more responsive steering.
Additional Fitment Information:
| Vehicle | Steering System |
|---|---|
| 1979 - Jeep CJ5 | Power |
- Steering Shaft; Telescopic; Steel; 1987-1995 Jeep Wrangler
- Telescopic; Steel; Heavy Duty; Includes Vibration Reducer Upgrade
- 1987-1995 Jeep Wrangler heavy duty telescopic steel steering shaft. Connects from factory column to steering box. For Jeeps with power steering. Includes vibration reducer upgrade.
- Steering Shaft Assembly
- Product Attributes:
- Universal Joint Quantity: 2
- Diameter: 1.000 In.
- End 2 Type: 1.000 In. Dd
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Length: 36.000 In.
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
- End 1 Type: 0.750 In. 30-spline
- Universal Joints Included: Yes
-
Features:
- Steering Shaft Assembly
- Jeep's original steering shaft assembly was not designed for the added stress of body lifts and oversize tires. Borgeson's replacement assembly has a telescoping shaft with two precision needle bearing u-joints. The steering assembly is easy to install with common hand tools. Once installed, you will experience much tighter and more responsive steering.
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - Jeep Wrangler |
- Intermediate Steering Shaft
- Product Attributes:
- Diameter: 0.961
- Mounting Hardware Included: No
- Package Contents: 1 Steering Shaft
- Length: 13.25
- Installation Instructions Included: No
- Spline Quantity: 28
-
Features:
- Precise fit - this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested - each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance - built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant - salt spray testing and premium coating help ensure future longevity
- This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
This Part Fits the Following OEM/Substitute Numbers:
425257, 55351208AA, 55351208AB, 55351246AA, JCDK02, SK111011
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2001 - Dodge Durango | Lower | 4WD |
Showing 1 - 10 of 244 products
Loading...