Image
Product
Price
- Connecting Rod;
- Connecting Rod
- Product Attributes:
- WARNING CA Proposition 65: No
- Overall Length: Oem
-
Features:
- Connecting Rod
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Jeep Commando | L | - | 6 Cyl 4.2L | 258 |
- Manley Connecting Rod, ROD-14056 W/ARP 2000
- Manley Connecting Rod, ROD-14056 W/ARP 2000.
- Product Attributes:
- Product Market: Domestic
- Average Gram Weight: 650
- Length: .425 Longer
- Product Type: Engine Connecting Rod
- Make: Chevrolet
- Engine Family: Small Block
- Journal Size: 2.000
- Rod Bolt Material: Arp 2000
- Connecting Rod Series: H-beam
- Connecting Rod Type: H-beam
- Engine Type: Ice
- Prop 65 (C, R or CR): Cr
- Wrist Pin Diameter: 0.927
- Engine - Web: Small Block
- Industry: Automotive
- Pin End Width: 1.060
- Title - Web: Manley Chevrolet Small Block H-beam Connecting Rod - 6.125 In. Length
- Engine: Small Block
- Prop 65 - Short Label: Prop 65 Warning Label.jpg
- Make - Web: Chevrolet
- Category Hierarchy: Connecting Rods>rod Sets
- Connecting Rod Material: 4340
- Out of Stock Message: Call For Availability
- Big End Bore: 2.125
- Title: Manley Connecting Rod, Rod-14056 W/arp 2000
- Pin End Bore: 0.9281
- Rod Quantity: 1
-
Features:
- Exacting Tolerances: Our H-Beam rods are finished to exacting tolerances to ensure precision and performance.
- Attention to Detail: Every aspect, from final hone size to thread detail, bend, and twist, is treated with utmost seriousness to deliver connecting rods of the highest quality.
- Exceptional Performance: Manley's H-Beam rods are designed to outperform others on the market, giving you a competitive advantage on the track.
- Flexible Bolt Options: Tailor your connecting rods to your specific requirements with a choice of ARP 8740 or ARP 2000 bolts.
- When it comes to H-Beam connecting rods, not all are created equal. Manley's H-Beam Series stands out as a superior choice, offering exceptional quality at an economical price point. These connecting rods are meticulously crafted to meet the same high-quality standards as our renowned Sportsmaster? and Pro Series rods.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Manley Connecting Rod, ROD-TOYOTA 2JZ T/T
- Manley Connecting Rod, ROD-TOYOTA 2JZ T/T.
- Product Attributes:
- Product Market: Sport Compact
- Average Gram Weight: 645
- Length: Stock
- Product Type: Engine Connecting Rod
- Make: Toyota
- Engine Family: 2jz
- Journal Size: Stock
- Rod Bolt Material: Arp 625+
- Connecting Rod Series: Pro Series I-beam
- Connecting Rod Type: I-beam
- Engine Type: Ice
- Connecting Rod Sub-Series: Turbo Tuff?
- Prop 65 (C, R or CR): Cr
- Wrist Pin Diameter: 0.866
- Engine - Web: 3.0l 2jzg
- Industry: Automotive
- Title - Web: Manley Toyota 93-98 Supra 3.0l 2jzg Pro Series I-beam Connecting Rod - 5.590 In. Length
- Engine: 3.0l 2jzg
- Prop 65 - Short Label: Prop 65 Warning Label.jpg
- Make - Web: Toyota
- Category Hierarchy: Connecting Rods>rod Sets
- Connecting Rod Material: 4340
- Out of Stock Message: Call For Availability
- Big End Bore: 2.167
- Title: Manley Connecting Rod, Rod-toyota 2jz T/t
- Engine Application: 93-98 Supra
- Pin End Bore: 0.8671
- Rod Quantity: 1
-
Features:
- Experience the pinnacle of connecting rod technology with our Pro Series rods, designed for ultimate performance.
- Superior Materials: These rods are available in two exceptional materials: forged 4340 or 300M vacuum degassed steel alloys, engineered for unparalleled performance and durability.
- NHRA Legal Certification: Certain SKUs within the Pro Series I-Beam range have earned "NHRA Legal" certification, ensuring compliance with NHRA legality standards for Stock and Super Stock racing categories.
- Versatile Weight Options: Our Pro Series I-Beam connecting rods offer multiple weights tailored to specific markets, including Tour Lites?, Lightweights, Standard Weights, and Heavy Weights, aligning perfectly with your engine's needs and performance objectives.
- Manley's Pro Series I-Beam Connecting Rods represent the epitome of precision, performance, and quality. Engineered with meticulous attention to detail and a finely tuned manufacturing process, these rods are a testament to our commitment to excellence. Elevate your engine's capabilities and achieve outstanding results with these exceptional connecting rods.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Manley Connecting Rod, ROD-14088 W/ARP 2000
- Manley Connecting Rod, ROD-14088 W/ARP 2000.
- Product Attributes:
- Product Market: Domestic
- Average Gram Weight: 665
- Length: Stock
- Product Type: Engine Connecting Rod
- Make: Chrysler
- Engine Family: Hemi
- Journal Size: 2.126
- Rod Bolt Material: Arp 2000
- Connecting Rod Series: H-beam
- Connecting Rod Type: H-beam
- Engine Type: Ice
- Prop 65 (C, R or CR): Cr
- Wrist Pin Diameter: 0.927
- Engine - Web:
- 6.2l Hemi
- 6.4l Hemi
- Industry: Automotive
- Pin End Width: 1.000
- Title - Web: Manley Chrysler 6.2l Hemi H-beam Connecting Rod - 6.200 In. Length
- Engine:
- 6.2l Hemi
- 6.4l Hemi
- Prop 65 - Short Label: Prop 65 Warning Label.jpg
- Make - Web: Chrysler
- Category Hierarchy: Connecting Rods>rod Sets
- Connecting Rod Material: 4340
- Out of Stock Message: Call For Availability
- Big End Bore: 2.252
- Title: Manley Connecting Rod, Rod-14088 W/arp 2000
- Pin End Bore: 0.9281
- Rod Quantity: 1
-
Features:
- Exacting Tolerances: Our H-Beam rods are finished to exacting tolerances to ensure precision and performance.
- Attention to Detail: Every aspect, from final hone size to thread detail, bend, and twist, is treated with utmost seriousness to deliver connecting rods of the highest quality.
- Exceptional Performance: Manley's H-Beam rods are designed to outperform others on the market, giving you a competitive advantage on the track.
- Flexible Bolt Options: Tailor your connecting rods to your specific requirements with a choice of ARP 8740 or ARP 2000 bolts.
- When it comes to H-Beam connecting rods, not all are created equal. Manley's H-Beam Series stands out as a superior choice, offering exceptional quality at an economical price point. These connecting rods are meticulously crafted to meet the same high-quality standards as our renowned Sportsmaster? and Pro Series rods.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Manley Connecting Rod, ROD-14042 W/ARP 2000
- Manley Connecting Rod, ROD-14042 W/ARP 2000.
- Product Attributes:
- Product Market: Domestic
- Average Gram Weight: 615
- Length: Stock
- Product Type: Engine Connecting Rod
- Make: Ford
- Engine Family: 4.6l Modular
- Journal Size: Stock
- Rod Bolt Material: Arp 2000
- Connecting Rod Series: H-beam
- Connecting Rod Type: H-beam
- Engine Type: Ice
- Prop 65 (C, R or CR): Cr
- Wrist Pin Diameter: 0.866
- Engine - Web: 4.6l Modular
- Industry: Automotive
- Pin End Width: 0.940
- Title - Web: Manley Ford 4.6l Modular V8 H-beam Connecting Rod - 5.933 In. Length
- Engine: 4.6l Modular
- Prop 65 - Short Label: Prop 65 Warning Label.jpg
- Make - Web: Ford
- Category Hierarchy: Connecting Rods>rod Sets
- Connecting Rod Material: 4340
- Out of Stock Message: Call For Availability
- Big End Bore: 2.239
- Title: Manley Connecting Rod, Rod-14042 W/arp 2000
- Pin End Bore: 0.8671
- Rod Quantity: 1
-
Features:
- Exacting Tolerances: Our H-Beam rods are finished to exacting tolerances to ensure precision and performance.
- Attention to Detail: Every aspect, from final hone size to thread detail, bend, and twist, is treated with utmost seriousness to deliver connecting rods of the highest quality.
- Exceptional Performance: Manley's H-Beam rods are designed to outperform others on the market, giving you a competitive advantage on the track.
- Flexible Bolt Options: Tailor your connecting rods to your specific requirements with a choice of ARP 8740 or ARP 2000 bolts.
- When it comes to H-Beam connecting rods, not all are created equal. Manley's H-Beam Series stands out as a superior choice, offering exceptional quality at an economical price point. These connecting rods are meticulously crafted to meet the same high-quality standards as our renowned Sportsmaster? and Pro Series rods.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Manley Connecting Rod, ROD-14051 W/ARP 2000
- Manley Connecting Rod, ROD-14051 W/ARP 2000.
- Product Attributes:
- Product Market: Domestic
- Average Gram Weight: 655
- Length: .025 Longer
- Product Type: Engine Connecting Rod
- Make: Chevrolet
- Engine Family:
- Ls
- Lt1
- Journal Size: Stock
- Rod Bolt Material: Arp 2000
- Connecting Rod Series: H-beam
- Connecting Rod Type: H-beam
- Engine Type: Ice
- Prop 65 (C, R or CR): Cr
- Wrist Pin Diameter: 0.927
- Engine - Web:
- Ls
- Lt-1
- Industry: Automotive
- Pin End Width: 1.060
- Title - Web: Manley Chevrolet Ls H-beam Connecting Rod - 6.125 In. Length
- Engine:
- Ls
- Lt-1
- Prop 65 - Short Label: Prop 65 Warning Label.jpg
- Make - Web: Chevrolet
- Category Hierarchy: Connecting Rods>rod Sets
- Connecting Rod Material: 4340
- Out of Stock Message: Call For Availability
- Big End Bore: 2.225
- Title: Manley Connecting Rod, Rod-14051 W/arp 2000
- Pin End Bore: 0.9281
- Rod Quantity: 1
-
Features:
- Exacting Tolerances: Our H-Beam rods are finished to exacting tolerances to ensure precision and performance.
- Attention to Detail: Every aspect, from final hone size to thread detail, bend, and twist, is treated with utmost seriousness to deliver connecting rods of the highest quality.
- Exceptional Performance: Manley's H-Beam rods are designed to outperform others on the market, giving you a competitive advantage on the track.
- Flexible Bolt Options: Tailor your connecting rods to your specific requirements with a choice of ARP 8740 or ARP 2000 bolts.
- When it comes to H-Beam connecting rods, not all are created equal. Manley's H-Beam Series stands out as a superior choice, offering exceptional quality at an economical price point. These connecting rods are meticulously crafted to meet the same high-quality standards as our renowned Sportsmaster? and Pro Series rods.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Manley Connecting Rod, ROD-SBC LS-1 6.125 H TUFF
- Manley Connecting Rod, ROD-SBC LS-1 6.125 H TUFF.
- Product Attributes:
- Product Market: Domestic
- Average Gram Weight: 680
- Length: .025 Longer
- Product Type: Engine Connecting Rod
- Make: Chevrolet
- Engine Family: Small Block
- Journal Size: Stock
- Rod Bolt Material: Arp 2000
- Connecting Rod Series: H-beam
- Connecting Rod Type: H-beam
- Engine Type: Ice
- Connecting Rod Sub-Series: H-tuff
- Prop 65 (C, R or CR): Cr
- Wrist Pin Diameter: 0.927
- Engine - Web: Small Block
- Industry: Automotive
- Pin End Width: 1.060
- Title - Web: Manley Chevrolet Small Block H-beam Connecting Rod - 6.125 In. Length
- Engine: Small Block
- Prop 65 - Short Label: Prop 65 Warning Label.jpg
- Make - Web: Chevrolet
- Category Hierarchy: Connecting Rods>rod Sets
- Connecting Rod Material: 4340
- Out of Stock Message: Call For Availability
- Big End Bore: 2.225
- Title: Manley Connecting Rod, Rod-sbc Ls-1 6.125 H Tuff
- Pin End Bore: 0.9281
- Rod Quantity: 1
-
Features:
- Exacting Tolerances: Our H-Beam rods are finished to exacting tolerances to ensure precision and performance.
- Attention to Detail: Every aspect, from final hone size to thread detail, bend, and twist, is treated with utmost seriousness to deliver connecting rods of the highest quality.
- Exceptional Performance: Manley's H-Beam rods are designed to outperform others on the market, giving you a competitive advantage on the track.
- Flexible Bolt Options: Tailor your connecting rods to your specific requirements with a choice of ARP 8740 or ARP 2000 bolts.
- When it comes to H-Beam connecting rods, not all are created equal. Manley's H-Beam Series stands out as a superior choice, offering exceptional quality at an economical price point. These connecting rods are meticulously crafted to meet the same high-quality standards as our renowned Sportsmaster? and Pro Series rods.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Toyota Sienna |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 08/01/2003-
Additional Fitment Information:
| Vehicle | Sub Model | Prod. Date Range |
|---|---|---|
| 2004 - Toyota Highlander | Limited | Fr:08-01-03 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Incl.Bearing and Bushing
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Toyota Camry | V | 2995 | 6 Cyl 3.0L | - |
Showing 1 - 10 of 30 products
Loading...