Speedometer Calibrator - AutoPartsWay.com
Found 11 items on 2 pages. Viewing page 1 of 2
Sort by :

Hypertech Speedometer Calibrator
Part Number: 730102 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
2007-2012 GM TRUCKS SUV
Recalibrate Your Speedometer/Odometer Readings for ANY Tire Size and/or Rear Gear Ratio in a Snap!

Hypertech's In-Line Speedometer Calibrator Module is an in-line module to correct the speedometer and odometer readings for unlimited tires sizes and/or rear gear ratios. This module is perfect for vehicles with computers that dont allow for tire size and/or rear gear ratio correction or want to re-calibrate for tire sizes and/or rear gear ratios outside the range of programmers.

Using the USB cable, connect the In-Line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations to tire height or rear gear ratios. Next, disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster and you're done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.60 lb.
Package Size:
8.00 x 1.75 x 8.00 inches
UPC:
759609046529
Hypertech Speedometer Calibrator
Part Number: 730103 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
2007-2013 TOYOTA TUNDRA 2008-2010 SEQUOIA
Recalibrate Your Speedometer/Odometer Readings for ANY Tire Size and/or Rear Gear Ratio in a Snap!

Hypertech's In-Line Speedometer Calibrator Module is an in-line module to correct the speedometer and odometer readings for unlimited tires sizes and/or rear gear ratios. This module is perfect for vehicles with computers that dont allow for tire size and/or rear gear ratio correction or want to re-calibrate for tire sizes and/or rear gear ratios outside the range of programmers.

Using the USB cable, connect the In-Line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations to tire height or rear gear ratios. Next, disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster and you're done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.60 lb.
Package Size:
8.00 x 1.75 x 8.00 inches
UPC:
759609046536
Hypertech Speedometer Calibrator
Part Number: 730105 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
2008-2010 NISSAN TITAN AND ARMADA
Recalibrate Your Speedometer/Odometer Readings for ANY Tire Size and/or Rear Gear Ratio in a Snap!

Hypertech's In-Line Speedometer Calibrator Module is an in-line module to correct the speedometer and odometer readings for unlimited tires sizes and/or rear gear ratios. This module is perfect for vehicles with computers that dont allow for tire size and/or rear gear ratio correction or want to re-calibrate for tire sizes and/or rear gear ratios outside the range of programmers.

Using the USB cable, connect the In-Line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations to tire height or rear gear ratios. Next, disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster and you're done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.60 lb.
Package Size:
8.00 x 1.75 x 8.00 inches
UPC:
759609046802
Hypertech Speedometer Calibrator
Part Number: 730107 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
2005-2011 TOYOTA TACOMA
Recalibrate Your Speedometer/Odometer Readings for ANY Tire Size and/or Rear Gear Ratio in a Snap!

Hypertech's In-Line Speedometer Calibrator Module is an in-line module to correct the speedometer and odometer readings for unlimited tires sizes and/or rear gear ratios. This module is perfect for vehicles with computers that dont allow for tire size and/or rear gear ratio correction or want to re-calibrate for tire sizes and/or rear gear ratios outside the range of programmers.

Using the USB cable, connect the In-Line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations to tire height or rear gear ratios. Next, disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster and you're done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.60 lb.
Package Size:
8.00 x 1.75 x 8.00 inches
UPC:
759609046871
Hypertech Speedometer Calibrator
Part Number: 732500 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
D
Product Notes:
96-07 GM CLASSIC TRUCK/SUV GAS 01-05 GM DIESEL 97-05 GM CAR

Hypertech's Speedometer Calibrator can correct the speedometer and odometer for tires up to 54 inches (depending on the application), and/or non-stock rear gear ratios. This new device is engineered for consumers that want the speedometer recalibration functions of the Max Energy Programmer without the additional expense of the other tuning features. The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet. Simply plug Hypertech's Speedometer Calibrator into the vehicle's under-dash connector, select the new tire height and/or new rear gear ratio, and in a matter of minutes, the vehicle's computer is reprogrammed for accurate readings (as required by law).

Speedometer Calibrator

If you've installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Speedometer Calibrator allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicle's computer calculates your vehicle's speed based on the diameter of the stock tires. If you've installed taller or shorter tires, or changed the rear gear ratio, the vehicle's computer doesn't know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Read & Clear Diagnostic Trouble Codes(DTCs)

If you get a "check engine" light or "service needed" message, the Speedometer Calibrator will allow you to read the code and gives you the ability to clear the code and turn the "check engine" light off. This allows owners to access information about the vehicle's operation without having to purchase expensive diagnostic computers or scanners used by dealership techniciansYou can then make the necessary repairs to prevent the light from coming back on.

Return To Stock Or Change Option Settings

Hypertech's Speedometer Calibrator downloads and saves the stock tuning program, then uploads your customized Speedometer Calibrator program. Before taking your vehicle into a dealership for service, always return the vehicle's computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Speedometer Calibrator Programming as before. The Speedometer Calibrator can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend's vehicle, simply return your vehicle to the stock program and you may then use the programmer on another vehicle that is covered in the same part number.

Internet Updateable

The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates or upgrades over the internet. If your vehicle has a new calibration not available when your Speedometer Calibrator was manufactured, it is possible that you will see a "Cal not found" message on the Speedometer Calibrator screen. If this occurs, you can simply update your Speedometer Calibrator with the correct new calibration via the internet. Simply connect the Speedometer Calibrator (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the supplied CD which in addition contains an installation video and a printable version of the instruction manual.

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.95 lb.
Package Size:
5.25 x 2.25 x 8.75 inches
UPC:
759609048493
Hypertech Speedometer Calibrator
Part Number: 732501 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
D
Product Notes:
07-UP GM TRUCK/SUV GAS 06-UP GM DIESEL 06-UP GM CAR

Hypertech's Speedometer Calibrator can correct the speedometer and odometer for tires up to 54 inches (depending on the application), and/or non-stock rear gear ratios. This new device is engineered for consumers that want the speedometer recalibration functions of the Max Energy Programmer without the additional expense of the other tuning features. The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet. Simply plug Hypertech's Speedometer Calibrator into the vehicle's under-dash connector, select the new tire height and/or new rear gear ratio, and in a matter of minutes, the vehicle's computer is reprogrammed for accurate readings (as required by law).

Speedometer Calibrator

If you've installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Speedometer Calibrator allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicle's computer calculates your vehicle's speed based on the diameter of the stock tires. If you've installed taller or shorter tires, or changed the rear gear ratio, the vehicle's computer doesn't know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Read & Clear Diagnostic Trouble Codes(DTCs)

If you get a "check engine" light or "service needed" message, the Speedometer Calibrator will allow you to read the code and gives you the ability to clear the code and turn the "check engine" light off. This allows owners to access information about the vehicle's operation without having to purchase expensive diagnostic computers or scanners used by dealership techniciansYou can then make the necessary repairs to prevent the light from coming back on.

Return To Stock Or Change Option Settings

Hypertech's Speedometer Calibrator downloads and saves the stock tuning program, then uploads your customized Speedometer Calibrator program. Before taking your vehicle into a dealership for service, always return the vehicle's computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Speedometer Calibrator Programming as before. The Speedometer Calibrator can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend's vehicle, simply return your vehicle to the stock program and you may then use the programmer on another vehicle that is covered in the same part number.

Internet Updateable

The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates or upgrades over the internet. If your vehicle has a new calibration not available when your Speedometer Calibrator was manufactured, it is possible that you will see a "Cal not found" message on the Speedometer Calibrator screen. If this occurs, you can simply update your Speedometer Calibrator with the correct new calibration via the internet. Simply connect the Speedometer Calibrator (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the supplied CD which in addition contains an installation video and a printable version of the instruction manual.

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.95 lb.
Package Size:
5.25 x 2.25 x 8.75 inches
UPC:
759609048509
Hypertech Speedometer Calibrator
Part Number: 742500 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
D
Product Notes:
99-04 FORD CAR/TRUCK GAS 05 EXCURSION GAS 99-03 FORD DIESEL 7.3L

Hypertech's Speedometer Calibrator can correct the speedometer and odometer for tires up to 54 inches (depending on the application), and/or non-stock rear gear ratios. This new device is engineered for consumers that want the speedometer recalibration functions of the Max Energy Programmer without the additional expense of the other tuning features. The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet. Simply plug Hypertech's Speedometer Calibrator into the vehicle's under-dash connector, select the new tire height and/or new rear gear ratio, and in a matter of minutes, the vehicle's computer is reprogrammed for accurate readings (as required by law).

Speedometer Calibrator

If you've installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Speedometer Calibrator allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicle's computer calculates your vehicle's speed based on the diameter of the stock tires. If you've installed taller or shorter tires, or changed the rear gear ratio, the vehicle's computer doesn't know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Read & Clear Diagnostic Trouble Codes(DTCs)

If you get a "check engine" light or "service needed" message, the Speedometer Calibrator will allow you to read the code and gives you the ability to clear the code and turn the "check engine" light off. This allows owners to access information about the vehicle's operation without having to purchase expensive diagnostic computers or scanners used by dealership techniciansYou can then make the necessary repairs to prevent the light from coming back on.

Return To Stock Or Change Option Settings

Hypertech's Speedometer Calibrator downloads and saves the stock tuning program, then uploads your customized Speedometer Calibrator program. Before taking your vehicle into a dealership for service, always return the vehicle's computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Speedometer Calibrator Programming as before. The Speedometer Calibrator can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend's vehicle, simply return your vehicle to the stock program and you may then use the programmer on another vehicle that is covered in the same part number.

Internet Updateable

The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates or upgrades over the internet. If your vehicle has a new calibration not available when your Speedometer Calibrator was manufactured, it is possible that you will see a "Cal not found" message on the Speedometer Calibrator screen. If this occurs, you can simply update your Speedometer Calibrator with the correct new calibration via the internet. Simply connect the Speedometer Calibrator (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the supplied CD which in addition contains an installation video and a printable version of the instruction manual.

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.95 lb.
Package Size:
5.25 x 2.25 x 8.75 inches
UPC:
759609048516
Hypertech Speedometer Calibrator
Part Number: 742501 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
D
Product Notes:
04-UP FORD/LINCOLN/MERCURY GAS 06-UP FORD DIESEL

Hypertech's Speedometer Calibrator can correct the speedometer and odometer for tires up to 54 inches (depending on the application), and/or non-stock rear gear ratios. This new device is engineered for consumers that want the speedometer recalibration functions of the Max Energy Programmer without the additional expense of the other tuning features. The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet. Simply plug Hypertech's Speedometer Calibrator into the vehicle's under-dash connector, select the new tire height and/or new rear gear ratio, and in a matter of minutes, the vehicle's computer is reprogrammed for accurate readings (as required by law).

Speedometer Calibrator

If you've installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Speedometer Calibrator allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicle's computer calculates your vehicle's speed based on the diameter of the stock tires. If you've installed taller or shorter tires, or changed the rear gear ratio, the vehicle's computer doesn't know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Read & Clear Diagnostic Trouble Codes(DTCs)

If you get a "check engine" light or "service needed" message, the Speedometer Calibrator will allow you to read the code and gives you the ability to clear the code and turn the "check engine" light off. This allows owners to access information about the vehicle's operation without having to purchase expensive diagnostic computers or scanners used by dealership techniciansYou can then make the necessary repairs to prevent the light from coming back on.

Return To Stock Or Change Option Settings

Hypertech's Speedometer Calibrator downloads and saves the stock tuning program, then uploads your customized Speedometer Calibrator program. Before taking your vehicle into a dealership for service, always return the vehicle's computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Speedometer Calibrator Programming as before. The Speedometer Calibrator can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend's vehicle, simply return your vehicle to the stock program and you may then use the programmer on another vehicle that is covered in the same part number.

Internet Updateable

The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates or upgrades over the internet. If your vehicle has a new calibration not available when your Speedometer Calibrator was manufactured, it is possible that you will see a "Cal not found" message on the Speedometer Calibrator screen. If this occurs, you can simply update your Speedometer Calibrator with the correct new calibration via the internet. Simply connect the Speedometer Calibrator (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the supplied CD which in addition contains an installation video and a printable version of the instruction manual.

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.95 lb.
Package Size:
5.25 x 2.25 x 8.75 inches
UPC:
759609048523
Hypertech Speedometer Calibrator
Part Number: 752500 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
B
Product Notes:
97-03 DODGE TRUCK/SUV GAS 96-04 JEEP 98 1/2-02 DODGE DIESEL

Hypertech's Speedometer Calibrator can correct the speedometer and odometer for tires up to 54 inches (depending on the application), and/or non-stock rear gear ratios. This new device is engineered for consumers that want the speedometer recalibration functions of the Max Energy Programmer without the additional expense of the other tuning features. The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet. Simply plug Hypertech's Speedometer Calibrator into the vehicle's under-dash connector, select the new tire height and/or new rear gear ratio, and in a matter of minutes, the vehicle's computer is reprogrammed for accurate readings (as required by law).

Speedometer Calibrator

If you've installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Speedometer Calibrator allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicle's computer calculates your vehicle's speed based on the diameter of the stock tires. If you've installed taller or shorter tires, or changed the rear gear ratio, the vehicle's computer doesn't know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Read & Clear Diagnostic Trouble Codes(DTCs)

If you get a "check engine" light or "service needed" message, the Speedometer Calibrator will allow you to read the code and gives you the ability to clear the code and turn the "check engine" light off. This allows owners to access information about the vehicle's operation without having to purchase expensive diagnostic computers or scanners used by dealership techniciansYou can then make the necessary repairs to prevent the light from coming back on.

Return To Stock Or Change Option Settings

Hypertech's Speedometer Calibrator downloads and saves the stock tuning program, then uploads your customized Speedometer Calibrator program. Before taking your vehicle into a dealership for service, always return the vehicle's computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Speedometer Calibrator Programming as before. The Speedometer Calibrator can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend's vehicle, simply return your vehicle to the stock program and you may then use the programmer on another vehicle that is covered in the same part number.

Internet Updateable

The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates or upgrades over the internet. If your vehicle has a new calibration not available when your Speedometer Calibrator was manufactured, it is possible that you will see a "Cal not found" message on the Speedometer Calibrator screen. If this occurs, you can simply update your Speedometer Calibrator with the correct new calibration via the internet. Simply connect the Speedometer Calibrator (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the supplied CD which in addition contains an installation video and a printable version of the instruction manual.

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.95 lb.
Package Size:
5.25 x 2.25 x 8.75 inches
UPC:
759609048547
Hypertech Speedometer Calibrator
Part Number: 752501 Manufacturer:  Hypertech
stars
Sale Price:
$229.00 
List Price:
$256.00
Save:
$27.00 (11 %)
Qty:
In Stock

In Stock

Leaves Warehouse Monday

shipped from same warehouse

Product Details

Warehouse: 
D
Product Notes:
03-UP CHRYSLER/DODGE GAS AND 05-UP JEEP

Hypertech's Speedometer Calibrator can correct the speedometer and odometer for tires up to 54 inches (depending on the application), and/or non-stock rear gear ratios. This new device is engineered for consumers that want the speedometer recalibration functions of the Max Energy Programmer without the additional expense of the other tuning features. The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates and upgrades over the internet. Simply plug Hypertech's Speedometer Calibrator into the vehicle's under-dash connector, select the new tire height and/or new rear gear ratio, and in a matter of minutes, the vehicle's computer is reprogrammed for accurate readings (as required by law).

Speedometer Calibrator

If you've installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Speedometer Calibrator allows you to re-program for correct speedometer and odometer readings, as well as correct part-throttle shifting. The vehicle's computer calculates your vehicle's speed based on the diameter of the stock tires. If you've installed taller or shorter tires, or changed the rear gear ratio, the vehicle's computer doesn't know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Read & Clear Diagnostic Trouble Codes(DTCs)

If you get a "check engine" light or "service needed" message, the Speedometer Calibrator will allow you to read the code and gives you the ability to clear the code and turn the "check engine" light off. This allows owners to access information about the vehicle's operation without having to purchase expensive diagnostic computers or scanners used by dealership techniciansYou can then make the necessary repairs to prevent the light from coming back on.

Return To Stock Or Change Option Settings

Hypertech's Speedometer Calibrator downloads and saves the stock tuning program, then uploads your customized Speedometer Calibrator program. Before taking your vehicle into a dealership for service, always return the vehicle's computer back to the factory programming. Once you have the vehicle back from the dealership, reinstall the Speedometer Calibrator Programming as before. The Speedometer Calibrator can only be used on one (1) vehicle at a time, so if you sell your vehicle or want to use it on a friend's vehicle, simply return your vehicle to the stock program and you may then use the programmer on another vehicle that is covered in the same part number.

Internet Updateable

The Speedometer Calibrator comes with a USB cable and a CD containing software to enable quick updates or upgrades over the internet. If your vehicle has a new calibration not available when your Speedometer Calibrator was manufactured, it is possible that you will see a "Cal not found" message on the Speedometer Calibrator screen. If this occurs, you can simply update your Speedometer Calibrator with the correct new calibration via the internet. Simply connect the Speedometer Calibrator (using the provided USB cord) to your computer and go to www.hypertech.com. Then click on the Support button to get update downloads. You can also get the update downloads using the supplied CD which in addition contains an installation video and a printable version of the instruction manual.

Brand Description:
As the power of digital systems expands, Hypertech will continue to design and manufacture power tuning products that are on the cutting edge of technology.
Weight:
0.95 lb.
Package Size:
5.25 x 2.25 x 8.75 inches
UPC:
759609048554

Speedometer Calibrator