Image
Product
Price
- 36.50 in. Long RE1810 Adapter Required For Installation~Sold Separately~Req. PN[RE1883-365] For 07-11 Models w/Automatic Trans~Req. PN[RE1883-365] For Models 07-17 w/Manual Trans
- CV Style Drive Shaft; Front; 36.50 in. Long;
- CV Style Drive Shaft
- Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Horsepower Rating: Oem
-
Features:
- Compatible With RE1811 Slip Yoke Eliminator Kit
- Compatible With Atlas Transfer Cases
- Compatible With Any 1310 Series CV Yoke
- Measured Center To Center On Joint
- Measured With Slip Stub At Center Of Travel
- Measure w/Vehicle On Ground In Running Position
- Spicer Drive Shafts And Components Are As Good As They Get. This Drive Shaft Is Compatible With Atlas Transfer Cases And Any Other 1310 Series CV Yoke. Measurements Are Taken Center To Center On The U-Joint With The Slip Stub At The Center Of Its Travel. Measure Your Vehicle On The Ground In The Running Position To Get Correct Length.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Jeep Wrangler | Front | X |
- 36.50 in. Long RE1810 Adapter Required For Installation~Sold Separately
- CV Style Drive Shaft; Front; 36.50 in. Long;
- CV Style Drive Shaft
- Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Horsepower Rating: Oem
-
Features:
- Compatible With RE1811 Slip Yoke Eliminator Kit
- Compatible With Atlas Transfer Cases
- Compatible With Any 1310 Series CV Yoke
- Measured Center To Center On Joint
- Measured With Slip Stub At Center Of Travel
- Measure w/Vehicle On Ground In Running Position
- Spicer Drive Shafts And Components Are As Good As They Get. This Drive Shaft Is Compatible With Atlas Transfer Cases And Any Other 1310 Series CV Yoke. Measurements Are Taken Center To Center On The U-Joint With The Slip Stub At The Center Of Its Travel. Measure Your Vehicle On The Ground In The Running Position To Get Correct Length.
Additional Fitment Information:
| Vehicle | Transmission | Position | Sub Model |
|---|---|---|---|
| 2019 - Jeep Wrangler | Manual | Front | Unlimited Sahara |
- Mustang Performance Driveshaft - Aluminum (3.5" Diameter) 1350 Series (1336mm)
- 3.50in Tube Diameter with Performance Driveshaft
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Notes: Flange Both Ends
- Cl Yoke To Cl Yoke(IN) - COLL.: 51.2205
- Cl Yoke To Cl Yoke(MM) - COLL.: 1301.0000
- Slip (In): 0.7874
- Max Slip (IN): 0.7874
- Phased - Degrees: N
- Shaft Material: Aluminum
- Slip (Mm): 20.0000
- Max Slip (MM): 20.0000
- Unleash the performance in your Ford Mustang with the Spicer one-piece aluminum driveshaft. Engineered specifically to enhance driveline performance in high horse power applications our design yields peak performance and optimum strength. Our reduced weight design is on average 21 pounds lighter than the OE shaft yielding reduced rotating mass, improved driving performance and quicker acceleration. The one-piece design eliminates the need for a center bearing further reducing driveline weight. This direct bolt-in assembly mounts directly the OE flange and requires no adapters. Spicer parts are engineered for peak performance so hit the road with confidence knowing you are backed by the global leader in driveline technology.
This Part Fits the Following OEM/Substitute Numbers:
DS10001766
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Ford Mustang | Rear | GT |
- Mustang Performance Driveshaft - Aluminum (3.5" Diameter) 1350 Series (1336mm)
- 3.50in Tube Diameter with Performance Driveshaft
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Notes: Flange Both Ends
- Cl Yoke To Cl Yoke(IN) - COLL.: 51.2205
- Cl Yoke To Cl Yoke(MM) - COLL.: 1301.0000
- Max Slip (IN): 0.7874
- Phased - Degrees: N
- Shaft Material: Aluminum
- Max Slip (MM): 20.0000
- Unleash the performance in your Ford Mustang with the Spicer one-piece aluminum driveshaft. Engineered specifically to enhance driveline performance in high horse power applications our design yields peak performance and optimum strength. Our reduced weight design is on average 21 pounds lighter than the OE shaft yielding reduced rotating mass, improved driving performance and quicker acceleration. The one-piece design eliminates the need for a center bearing further reducing driveline weight. This direct bolt-in assembly mounts directly the OE flange and requires no adapters. Spicer parts are engineered for peak performance so hit the road with confidence knowing you are backed by the global leader in driveline technology.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2006 - Ford Mustang | Rear | GT |
- Front Driveshaft Assembly
- Product Attributes:
- Drive Shaft Length (In): 29 In
- Drive Shaft Wall Thickness (In): 0.083 In
- Grade Type: Regular
- Package Contents: 1 Driveshaft
- Overall Length Adjustable: No
- Greaseable Drive Shaft: No
- Shaft Material: Steel
- Shaft Diameter: 1.5
-
Features:
- Ready to install - this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- All-new manufacturing - made 100% new, not remanufactured, so there's no core charge or return hassle
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- Simplifies repair - this replacement makes the U-joints serviceable for simpler maintenance
- The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX front drive shaft makes the U-joints serviceable for simpler maintenance.
This Part Fits the Following OEM/Substitute Numbers:
26207629987, BMP-001, SK936310
Additional Fitment Information:
| Vehicle | Transmission | Position |
|---|---|---|
| 2006 - BMW 325xi | Manual | Front |
- Front Driveshaft Assembly
- NV245 Quadra-Trac II Transfer Case w/Sales Code DHX (Quadra-Trac II Full-Time Active 4WD)
- Product Attributes:
- Drive Shaft Length (In): 35.125 In
- Drive Shaft Wall Thickness (In): 0.083 In
- Grade Type: Regular
- Package Contents: 1 Driveshaft
- Overall Length Adjustable: Yes
- Greaseable Drive Shaft: Yes
- Shaft Material: Steel
- Shaft Diameter: 2
-
Features:
- Ready to install - this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
- Simplifies repair - this replacement makes the U-joints serviceable for simpler maintenance
- All-new manufacturing - made 100% new, not remanufactured, so there's no core charge or return hassle
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX front drive shaft makes the U-joints serviceable for simpler maintenance.
This Part Fits the Following OEM/Substitute Numbers:
52853431AA, 65-3007, 93-1444
Additional Fitment Information:
| Vehicle | Transmission | Position | Transmission Manuf. Code | Drive Type |
|---|---|---|---|---|
| 2007 - Jeep Grand Cherokee | Automatic | Front | 545RFE | AWD |
- Front Driveshaft Assembly
- Product Attributes:
- Axle Nut Included: No
- Drive Shaft Length (In): 33.5 In
- Slip Yoke: Yes
- Drive Shaft Wall Thickness (In): 0.095 In
- CV Joints Included: No
- Grade Type: Regular
- Package Contents: 1 Driveshaft
- Overall Length Adjustable: Yes
- Greaseable Drive Shaft: Yes
- Shaft Material: Steel
- Shaft Diameter: 2.5
-
Features:
- Direct replacement - this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new - this drive shaft is made from all new components so there's no core charge or return hassle
- Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction - non-staked universal joints are designed for future serviceability
- Replacing a drive shaft doesn't have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
This Part Fits the Following OEM/Substitute Numbers:
52105934AA, 52105934AB, 52105934AC, 52105934AD, 52105934AE, 52105934AF, 52123112AA, 52123326AA, 52123326AB, 65-9535, 65-9540, 65-9541, 68057601AA, 93-1401, 93-1406, 93-1407, CHP-017, N95357...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Dodge Ram 2500 | L | - | Automatic | Front | 6 Cyl 5.9L | 4WD | 359 |
- Front Driveshaft Assembly
- w/Serrated Pinion Flange
- Product Attributes:
- Axle Nut Included: No
- Drive Shaft Length (In): 33.5 In
- Slip Yoke: Yes
- Drive Shaft Wall Thickness (In): 0.095 In
- CV Joints Included: No
- Grade Type: Regular
- Package Contents: 1 Driveshaft
- Overall Length Adjustable: Yes
- Greaseable Drive Shaft: Yes
- Shaft Material: Steel
- Shaft Diameter: 2.5
-
Features:
- Direct replacement - this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new - this drive shaft is made from all new components so there's no core charge or return hassle
- Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction - non-staked universal joints are designed for future serviceability
- Replacing a drive shaft doesn't have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Transmission Manuf. Code | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | Automatic | Front | 6 Cyl 6.7L | 68RFE | Crew Cab Pickup | 4WD | 408 |
- Front Driveshaft Assembly
- From 11/04/02
- Product Attributes:
- Drive Shaft Length (In): 41.5 In
- Drive Shaft Wall Thickness (In): 0.083 In
- Grade Type: Regular
- Package Contents: 1 Driveshaft
- Overall Length Adjustable: Yes
- Greaseable Drive Shaft: Yes
- Shaft Material: Steel
- Shaft Diameter: 2.75
-
Features:
- Direct replacement - this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new - this drive shaft is made from all new components so there's no core charge or return hassle
- Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction - non-staked universal joints are designed for future serviceability
- Replacing a drive shaft doesn't have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
This Part Fits the Following OEM/Substitute Numbers:
3C3Z4A376AA, 5C3Z4A376DA, 5C3Z4A376F, 5C3Z4A376JA, 65-9546, 65-9551, 93-1412, 93-1423, 9C3Z4A376B, FDP-267, N95463, ZDS9546A
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|
| 2003 - Ford F-350 Super Duty | V | - | Automatic | Front | DIESEL | 8 Cyl 6.0L | 4WD | 363 |
- Front Dual CV Driveshaft
- DRIVESHAFT FRT FORD SD
- Drive Shaft
- Product Attributes:
- Usage: Off-road
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
- Horsepower Rating: Oem
-
Features:
- Dual CV Driveshaft
- More Rugged And HD Than Stock
- Dual CV Driveshaft
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford F-250 Super Duty | Front |
Showing 1 - 10 of 332 products
Loading...