Image
Product
Price
- Not Legal For Sale Or Use In California
- Air Intake Tube;
- Air Intake Tube
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Air Intake Tube
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Jeep CJ5 | L | - | 4 Cyl 2.5L | 151 |
- Not Legal For Sale Or Use In California
- Air Intake Duct;
- Air Intake Duct
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Air Intake Duct
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Brakes | Engine | CID |
|---|---|---|---|---|---|
| 1982 - Jeep CJ5 | L | - | Power | 6 Cyl 4.2L | 258 |
- Spectre Universal Tube Elbow
- Spectre s 60 degree 3 inch diameter intake elbow includes a chrome collar clamp. This elbow features a chrome finish; co-polymer ABS resin construction.
- Product Attributes:
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: Yes
- Length: 5.000 In. (127mm)
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Insulated: No
- Item Weight: 0.400 Lbs. (0.2 Kg)
- Diameter: 3.000 In. O.d.
- Package Material: Plastic Other
- Tube Style: 60 Degree Elbow
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Compatibility: Universal
- Package Type: Blisterpack
- Prop 65 (C, R or CR): Cr
-
Features:
- Co-Polymer Resin Insulates From Heat
- Triple Chromium Plating Deflects Heat
- Smooth Inside Delivers Higher Airflow To Engine
- Twist And Turn To Create Custom Design
- Spectre's 60 degree 3 inch diameter intake elbow includes a chrome collar clamp. Featuring a chrome finish and co-polymer ABS resin construction this elbow can help insulate the intake tract from heat. It can be combined with other 3 inch diameter chrome tubes to create an intake for almost any application. This part is not recommended for turbo-charged/super charged engines.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- AIRAID Modular Intake Tube
- RotoMolded Polyethylene; Stainless Steel Clamps/Silicone Couplers/Hump Hoses Included;Not Legal For Sale Or Use In California
- AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque.
- Modular Intake Tube
- Product Attributes:
- Automotive Item Grade: High Performance
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Item Weight: 4.500 Lbs. (2 Kg)
- Product Box Height: 7.000 In. (178mm)
- Diameter: N/a
- Package Material: Paperboard
- Product Box Length: 23.200 In. (589mm)
- Tube Style: Multi-angle
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Prop 65 (C, R or CR): Cr
- Street Legal: No
-
Features:
- Engineered To Boost Horsepower And Torque
- Low Restriction Free Flowing Intake Tube
- Roto-Molded High Density Polyethylene Intake Tube
- Easy To Follow Instructions
- Installs In Minutes With A Few Simple Tools
- No Hassle Lifetime Warranty
- AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque. MITs are constructed from cross-linked, high-density polyethylene, built each for a specific vehicle make and model, and can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions. Some AIRAID air intake components are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Chevrolet Tahoe |
- Without Power Brakes;Not Legal For Sale Or Use In California
- Air Intake Tube; Without Power Brakes;
- Air Intake Tube
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Air Intake Tube
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Brakes | Engine | CID |
|---|---|---|---|---|---|
| 1982 - Jeep CJ7 | L | - | Power | 6 Cyl 4.2L | 258 |
- AIRAID Modular Intake Tube
- RotoMolded Polyethylene; Stainless Steel Clamps/Silicone Couplers/Hump Hoses Included; w/Electric Cooling Fan;CARB E.O. D-609-6 w/Electric Cooling Fan
- AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque.
- Modular Intake Tube
- Product Attributes:
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- TUV Approved (Europe): No
- Item Weight: 4.200 Lbs. (1.9 Kg)
- Product Box Height: 7.000 In. (178mm)
- Product Box Length: 23.200 In. (589mm)
- Clamp Quantity: 4
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Diameter: N/a
- Package Material: Paperboard
- Couplers Included: 2
- Tube Style: Multi-angle
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
-
Features:
- Engineered To Boost Horsepower And Torque
- Low Restriction Free Flowing Intake Tube
- Roto-Molded High Density Polyethylene Intake Tube
- Easy To Follow Instructions
- Installs In Minutes With A Few Simple Tools
- No Hassle Lifetime Warranty
- AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque. MITs are constructed from cross-linked, high-density polyethylene, built each for a specific vehicle make and model, and can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions. Some AIRAID air intake components are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Chevrolet Avalanche | V | 5328 | 8 Cyl 5.3L | 325 |
- AIRAID Modular Intake Tube
- RotoMolded Polyethylene; Stainless Steel Clamps/Silicone Couplers/Hump Hoses Included; w/Electric Cooling Fan;Not Legal For Sale Or Use In California w/Electric Cooling Fan
- AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque.
- Modular Intake Tube
- Product Attributes:
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- TUV Approved (Europe): No
- Item Weight: 4.200 Lbs. (1.9 Kg)
- Product Box Height: 7.000 In. (178mm)
- Product Box Length: 23.200 In. (589mm)
- Clamp Quantity: 4
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Diameter: N/a
- Package Material: Paperboard
- Couplers Included: 2
- Tube Style: Multi-angle
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
-
Features:
- Engineered To Boost Horsepower And Torque
- Low Restriction Free Flowing Intake Tube
- Roto-Molded High Density Polyethylene Intake Tube
- Easy To Follow Instructions
- Installs In Minutes With A Few Simple Tools
- No Hassle Lifetime Warranty
- AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque. MITs are constructed from cross-linked, high-density polyethylene, built each for a specific vehicle make and model, and can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions. Some AIRAID air intake components are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - GMC Sierra 1500 | V | - | 8 Cyl 4.8L | 294 |
- AIRAID Modular Intake Tube
- RotoMolded Polyethylene; Stainless Steel Clamps/Silicone Couplers/Hump Hoses Included; w/Electric Cooling Fan;Not Legal For Sale Or Use In California
- AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque.
- Modular Intake Tube
- Product Attributes:
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- TUV Approved (Europe): No
- Item Weight: 4.200 Lbs. (1.9 Kg)
- Product Box Height: 7.000 In. (178mm)
- Product Box Length: 23.200 In. (589mm)
- Clamp Quantity: 4
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Diameter: N/a
- Package Material: Paperboard
- Couplers Included: 2
- Tube Style: Multi-angle
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
-
Features:
- Engineered To Boost Horsepower And Torque
- Low Restriction Free Flowing Intake Tube
- Roto-Molded High Density Polyethylene Intake Tube
- Easy To Follow Instructions
- Installs In Minutes With A Few Simple Tools
- No Hassle Lifetime Warranty
- AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque. MITs are constructed from cross-linked, high-density polyethylene, built each for a specific vehicle make and model, and can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions. Some AIRAID air intake components are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - GMC Yukon XL 1500 | V | 5328 | 8 Cyl 5.3L | 325 |
- 28 in. Long;Not Legal For Sale Or Use In California
- Air Intake Duct; 28 in. Long;
- Air Intake Duct
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Air Intake Duct
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Jeep CJ7 | L | - | 4 Cyl 2.5L | 150 |
- Universal Tube w/Maf Plate
- AIRAID Universal Mass Air Flow (MAF) Adapter Tubes join AIRAID s growing line of U-Build-It components which make it easier than ever before to build a clean and effective cold air intake for any custom application.
- Product Attributes:
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Item Weight: 1.000 Lbs. (0.5 Kg)
- Product Box Height: 7.600 In. (193mm)
- Diameter: 4.000 In. O.d.
- Product Box Width: 7.300 In. (185mm)
- Package Material: Paperboard
- Product Box Length: 7.400 In. (188mm)
- Tube Style: Straight
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Prop 65 (C, R or CR): Cr
-
Features:
- Quick Way To Add MAF Sensor To Custom Air Intake Systems
- Used To Create A Custom Air Intake System
- For Use With Other UBI Components
- Sold Individually
- AIRAID Universal Mass Air Flow (MAF) Adapter Tubes join AIRAID's growing line of U-Build-It components which make it easier than ever before to build a clean and effective cold air intake for any custom application. AIRAID MAF Adapter Tubes are sold individually but are intended for use with other UBI components.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Showing 1 - 10 of 10 products
Loading...