Image
Product
Price
- Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
- Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Exit Position: Single Side
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- Gray Color
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - GMC C25/C2500 Pickup |
- Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required Use Offset Inlet/Center Outlet Mufflers Only
- Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Exit Position: Single Side
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 942551 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1974 - Chevrolet Camaro | L | 4097 | 6 Cyl 4.1L | Base | 250 |
- Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
- Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Exit Position: Single Side
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 942551 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Pontiac Firebird | V | - | 8 Cyl 7.5L | 455 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 225mm Length
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - Volkswagen Karmann Ghia |
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1974 - Porsche 911 | Carrera |
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - Volkswagen Super Beetle |
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - Volkswagen Campmobile |
Additional Fitment Information:
| Vehicle |
|---|
| 1974 - Volkswagen Karmann Ghia |
- 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; w/o Cut Outs; Offset Inlet/Center Outlet Mufflers Required Use Offset Inlet/Center Outlet Mufflers Only
- Tailpipe Set; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; w/o Cut Outs; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Dodge Charger | V | 5211 | 8 Cyl 5.2L | 318 |
- 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; w/o Cut Outs; Offset Inlet/Center Outlet Mufflers Required
- Tailpipe Set; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; w/o Cut Outs; Offset Inlet/Center Outlet Mufflers Required;
- Tailpipe Set
- Product Attributes:
- Tubing Diameter: 2.500 In.
- Automotive Item Grade: High Performance
- Exhaust Pipe Wall Max Gauge: 16
- Inlet Diameter: 2.500 In.
- System Type: Tailpipe
- WARNING CA Proposition 65: No
- Fitment: Direct Oe Replacement
- Overall Length: 65.250 In.
- Outlet Diameter: 2.500 In.
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Exits At Rear Of Vehicle
- 3 Year Limited Warranty
- Premium Flowmaster Quality
- These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1974 - Plymouth Satellite | V | - | 8 Cyl 5.9L | 360 |
Showing 1 - 10 of 12 products
Loading...