Image
Product
Price
- Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 4.375
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1990 - Geo Prizm | L | 1587 | 4 Cyl 1.6L | - |
- Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 4.375
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Geo Prizm | L | 1588 | Rear | 4 Cyl 1.6L | 98 |
- Universal Catalytic Converter - 2.00in.
- Federal Emissions Equipped Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 4.375
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Geo Prizm | L | 1762 | 4 Cyl 1.8L | 107 |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2
- Mounting Hardware Included: Yes
- Outlet Attachment: Bolt-on
- Air Tube Adaptable: No
- Overall Length: 12.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
17410-02110, 17410-11690, 17410-11700, 17410-16880, 17410-1A010, 1741002110, 1741011690, 1741011700, 1741016880, 174101A010, 18450-01060, 18450-01070, 18450-01080, 18450-01090, 18450-01100, 18450-01110, 18450-11160, 18450-16050...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Geo Prizm | L | 1587 | 4 Cyl 1.6L | - |
- Direct-Fit Catalytic Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2
- Mounting Hardware Included: Yes
- Outlet Attachment: Bolt-on
- Air Tube Adaptable: No
- Overall Length: 12.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Geo Prizm | L | 1588 | Rear | 4 Cyl 1.6L | 98 |
- Direct-Fit Catalytic Converter
- Federal Emissions Equipped
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2
- Mounting Hardware Included: Yes
- Outlet Attachment: Bolt-on
- Air Tube Adaptable: No
- Overall Length: 12.5
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Geo Prizm | L | 1762 | 4 Cyl 1.8L | 107 |
- HM Grade Direct-Fit Catalytic Converter
- Standard Series; 2 in. Tubing; 2 in. Inlet/Outlet OD; Overall L-12.50 in.; O2 Sensor Location Pre/Post Conv.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
- Direct-Fit Catalytic Converter
- Direct Fit Catalytic Converter
- Product Attributes:
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: No
- Outlet Attachment Type: Bolt-on
- Recommended Use: Converter
- Body Material: Stainless Steel
- Exhaust Component Mount Type: Uses Factory Hangers
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- Body Length: 9.000 In.
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- Inlet Connection Type: Bolt-on
- Oxygen Sensor Location: None
- Exhaust Pipe Material: Stainless Steel
- Outlet Connection Type: Bolt-on
- Overall Length: 12.500 In.
- Subtitles: Federal / Epa Compliant
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Converter Body Size: Oem
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Core Substrate Material: Ceramic
- Emission: Non-california (49-state)
- Inlet Attachment Type: Bolt-on
- Outlet Type: Bolt-on
-
Features:
- Stainless Steel Construction
- Federal Emissions Compliant Designed
- Meets EPA Requirements
- MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.
This Part Fits the Following OEM/Substitute Numbers:
17410-02110, 17410-11690, 17410-11700, 17410-16880, 17410-1A010, 1741002110, 1741011690, 1741011700, 1741016880, 174101A010, 18450-01060, 18450-01070, 18450-01080, 18450-01090, 18450-01100, 18450-01110, 18450-11160, 18450-16050...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Geo Prizm | L | 1762 | 4 Cyl 1.8L | 107 |
- HM Grade Direct-Fit Catalytic Converter
- Standard Series; 2 in. Tubing; 2 in. Inlet/Outlet OD; Overall L-12.50 in.; O2 Sensor Location Pre/Post Conv.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Except California
- Direct-Fit Catalytic Converter
- Direct Fit Catalytic Converter
- Product Attributes:
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: No
- Outlet Attachment Type: Bolt-on
- Recommended Use: Converter
- Body Material: Stainless Steel
- Exhaust Component Mount Type: Uses Factory Hangers
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- Body Length: 9.000 In.
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- Inlet Connection Type: Bolt-on
- Oxygen Sensor Location: None
- Exhaust Pipe Material: Stainless Steel
- Outlet Connection Type: Bolt-on
- Overall Length: 12.500 In.
- Subtitles: Federal / Epa Compliant
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Converter Body Size: Oem
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Core Substrate Material: Ceramic
- Emission: Non-california (49-state)
- Inlet Attachment Type: Bolt-on
- Outlet Type: Bolt-on
-
Features:
- Stainless Steel Construction
- Federal Emissions Compliant Designed
- Meets EPA Requirements
- MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1995 - Geo Prizm | L | 1588 | Rear | 4 Cyl 1.6L | Base | 98 |
- HM Grade Direct-Fit Catalytic Converter
- Standard Series; 2 in. Tubing; 2 in. Inlet/Outlet OD; Overall L-12.50 in.; O2 Sensor Location Pre/Post Conv.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Direct-Fit Federal [Excludes CA]~Excludes California Emissions Equipped Vehicle
- Direct-Fit Catalytic Converter
- Direct Fit Catalytic Converter
- Product Attributes:
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: No
- Outlet Attachment Type: Bolt-on
- Recommended Use: Converter
- Body Material: Stainless Steel
- Exhaust Component Mount Type: Uses Factory Hangers
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- Body Length: 9.000 In.
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- Inlet Connection Type: Bolt-on
- Oxygen Sensor Location: None
- Exhaust Pipe Material: Stainless Steel
- Outlet Connection Type: Bolt-on
- Overall Length: 12.500 In.
- Subtitles: Federal / Epa Compliant
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Converter Body Size: Oem
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Core Substrate Material: Ceramic
- Emission: Non-california (49-state)
- Inlet Attachment Type: Bolt-on
- Outlet Type: Bolt-on
-
Features:
- Stainless Steel Construction
- Federal Emissions Compliant Designed
- Meets EPA Requirements
- MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1994 - Geo Prizm | L | 1762 | 4 Cyl 1.8L | LSi | 107 |
- Standard Grade Universal Catalytic Converter-2.00in.
- Standard Series; 2 in. Tubing/Inlet/Outlet; Overall L-13.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
- Universal Catalytic Converter-2.00in.
- 91000 Series OBDII Compliant Universal Catalytic Converter
- Product Attributes:
- Inlet Diameter: 2.000 In.
- WARNING CA Proposition 65: No
- Body Width: 5.500 In.
- Outlet Attachment Type: Weld-on
- Body Height: 3.750 In.
- Recommended Use: Converter
- Body Material: Stainless Steel
- Heat Shield Included: Yes
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- Body Length: 9.000 In.
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- Outlet Diameter: 2.000 In.
- Oxygen Sensor Location: None
- Heat Shield Attached: Yes
- Overall Length: 13.000 In.
- Subtitles: Federal / Epa Compliant
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Converter Body Size: Oem
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Body Shape: Oval
- Core Substrate Material: Ceramic
- Sensor Port Count: 0
- Emission: Non-california (49-state)
- Inlet Attachment Type: Weld-on
- Outlet Type: Weld-on
-
Features:
- For Small To Medium Weight Vehicles
- Compact Size
- Perfect For A Variety Of Import And Domestic
- MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 1990 - Geo Metro | L | 993 | Automatic | Front | 3 Cyl 1.0L | 61 |
Showing 1 - 10 of 81 products
Loading...