1980 Jeep J10 Steering Parts
Choose your Part Name for your 1980 Jeep J10
Power Steering Cooler
Power Steering Pump
Steering Column Bearing
Steering Coupling Assembly
Steering Coupling Boot
Steering Damper
Steering Drag Link
Steering Drag Link Adjusting Sleeve
Steering Gear Box
Steering Gear Box Bolt
Steering Gear Seal Kit
Steering Pitman Arm
Steering Pitman Arm Washer
Steering Shaft Bearing
Steering Tie Rod End Adjusting Sleeve
Image
Product
Price
- with OEM Steering Damper Mounts Single Steering Damper
- Rancho RS5000 Steering Damper
This Part Fits the Following OEM/Substitute Numbers:
52038476, 52039280, 52039282
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Jeep J10 | Front |
- Drag Link
- 3.38 (in) Length Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES453L Drag Link
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
03-87057, 269-2328, 310241, 310376, 387057, 401-1124, 45A0124, 534-787, 612.58024, 802-453L, 8024531, 8123319, E-6742-TU, E6742, ES453L, J8123319, MES453L, TR1377...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Jeep J10 | At Pitman Arm |
- REPL STAB; SILVER W/BK BOOT
- Extended Length 23.9 in.; Collapsed Length 14.35 in.; Silver w/Black Boot; Replacement Cylinder Only; No Hardware Included For Use w/Skyjacker Stabilizer Kits Only
- REPL STAB; SILVER W/BK BOOT
- Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Is A Dampening Shock For Steering Stabilizer
- Dampens Harshness Of Highway
- Reduce Driver Fatigue
- Dampens Shimmy From Larger Tires
- Inexpensive And Worthy Investment
- Reduce Physical Strength Handling Larger Tires
- Limited Lifetime Warranty
- Skyjacker(R) stabilizers dampen out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the drivers hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive and worthy investment.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Jeep J10 | Front |
- REPL STAB; BLACK W/BLACK BT
- Black; Extended Length 23.9 in.; Collapsed Length 14.35 in.; Replacement Cylinder Only; No Hardware Included For Use w/Skyjacker Stabilizer Kits Only
- REPL STAB; BLACK W/BLACK BT
- Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Is A Dampening Shock For Steering Stabilizer
- Dampens Harshness Of Highway
- Reduce Driver Fatigue
- Dampens Shimmy From Larger Tires
- Inexpensive And Worthy Investment
- Reduce Physical Strength Handling Larger Tires
- Limited Lifetime Warranty
- Black
- Skyjacker(R) stabilizers dampen out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the drivers hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive and worthy investment.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Jeep J10 | Front |
- REPL STAB; WHITE W/RED BOOT
- Extended Length 23.9 in.; Collapsed Length 14.35 in.; Replacement Cylinder Only; No Hardware Included For Use w/Skyjacker Stabilizer Kits Only
- REPL STAB; WHITE W/RED BOOT
- Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Is A Dampening Shock For Steering Stabilizer
- Dampens Harshness Of Highway
- Reduce Driver Fatigue
- Dampens Shimmy From Larger Tires
- Inexpensive And Worthy Investment
- Reduce Physical Strength Handling Larger Tires
- Limited Lifetime Warranty
- Skyjacker(R) stabilizers dampen out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the drivers hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive and worthy investment.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Jeep J10 | Front |
- Includes Rack Kit/Bearings/Small Parts; w/Tilt Column
- Steering Column Bearing; Includes Rack Kit/Bearings/Small Parts; w/Tilt Column;
- Steering Column Bearing
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Steering Column Bearing
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Jeep J10 |
- Tie Rod End Adjusting Sleeve
- MOOG ES362S Tie Rod End Adjusting Sleeve
- Product Attributes:
- Length: 4.5
-
Features:
- Coated for corrosion resistance
- Alloy steel construction provides durability
- Includes any necessary hardware
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-88901, 0388901E, 14007644, 15617288, 269-1105, 269-1120, 269-1128, 310180, 3735346, 3735347, 388901, 4112842, 4112843, 41137, 425-1002, 425-1002B, 45A6002, 46A6002A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Jeep J10 | At Pitman Arm |
- Tie Rod End Adjusting Sleeve
- MOOG ES362S Tie Rod End Adjusting Sleeve
- Product Attributes:
- Length: 4.5
-
Features:
- Coated for corrosion resistance
- Alloy steel construction provides durability
- Includes any necessary hardware
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Jeep J10 | Steering Arm To Steering Arm |
- Power Steering Oil Cooler
- Power Steering Oil Cooler
- Pwr Strg Oil Cooler
- Product Attributes:
- Depth IN: 0.750
- Height IN: 2.500
- Outlet Size IN: 0.375
- Connector Fitting: 3/8
- Fittings Included?: Included
- Hose Length FT: 4.500
- Length IN: 9.000
- Gasket / Seals?: Not Included
- Mounting Hardware?: Included
- Description: Power Steering Oil Cooler
- Hose Size Number: 11/32
- Contains Spring?: Not Included
- Row Quantity: 2
- With Electric Fan?: Not Included
- O.E. Replacement?: No
- Bracket?: Not Included
This Part Fits the Following OEM/Substitute Numbers:
1009, 11153019, 13213, 14866, 1534157, 212, 241009, 53019, 6919, 77430, 911009, CWK911009
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 1980 - Jeep J10 | Canada |
- Pitman Arm Lock Washer;
- Pitman Arm Lock Washer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Pitman Arm Lock Washer
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Jeep J10 |
Showing 1 - 10 of 28 products
Loading...