1980 Chevrolet Corvette Steering Parts
Choose your Part Name for your 1980 Chevrolet Corvette
Image
Product
Price
- Power Steering Conversion Kit.; 67-82 Corvette with factory P/S; 12.7:1 ratio.
- 1 in. -48 Spline Column; Complete Kit
- 1967-1982 Corvette complete Power Steering Conversion Kit. For cars with factory style power steering and a 1in.-48 spline column. Includes 12.7:1 ratio Delphi 600 power steering box; hoses; drag link adapter and rag joint.
- Power Steering Conversion Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.g
-
Features:
- Power Steering Conversion Kit
- Borgeson offers an integral power steering conversion for your 1963-1982 Classic Corvette. The Borgeson conversion box is a re-manufactured GM Delphi 600 integral power steering gearbox. The Delphi 600 represents the latest generation of integral power steering gearbox technology with true modern power steering feel, feedback and a sporty 12.7:1 ratio. Borgeson has re-manufactured this box to bolt directly to the factory mounting location and to fit the stock pitman arm. A new rag joint will be required for connection to the stock column. The factory column will need to be collapsed or shortened 1-2 in. for clearance of conversion box. Also a drag link adapter will be required for cars with factory style power steering. Eliminate your leaky control valve and feel the road with a new integral power steering conversion from Borgeson.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Chevrolet Corvette | V | - | 8 Cyl 5.0L | 305 |
- Red; Round Style; Largest Diameter Taper 0.59 in./15mm; Socket Top Diameter 1 3/8 in./35mm; 2 Pack
- Tie Rod Dust Boot; Red; Round Style; Largest Diameter Taper 0.59 in./15mm; Socket Top Diameter 1 3/8 in./35mm; 2 Pack;
- Tie Rod Dust Boot
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy To Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
- Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy's Hyper-Flex(TM) performance polyurethane for added performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet Corvette |
- Black; Round Style; Largest Diameter Taper 0.59 in./15mm; Socket Top Diameter 1 3/8 in./35mm; 2 Pack
- Tie Rod Dust Boot; Black; Round Style; Largest Diameter Taper 0.59 in./15mm; Socket Top Diameter 1 3/8 in./35mm; 2 Pack;
- Tie Rod Dust Boot
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy To Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
- Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy's Hyper-Flex(TM) performance polyurethane for added performance and durability.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet Corvette |
- Tie Rod End
- with Left Hand Threads
- MOOG ES323L Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Counterclockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.625
- End 2 Gender: Male
- Length - Stud Center to End: 4.000
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-82035, 0382035E, 141041HAX, 269-2124, 310154, 382035, 3826596, 401-1031, 401-1031B, 45A0031, 46A0031A, 52302242, 534-531, 612.66075, 61366075, 802-323L, 8045064, D0HZ-3A131A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet Corvette | Left Inner |
- Tie Rod End
- with Left Hand Threads
- MOOG ES323L Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Counterclockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.625
- End 2 Gender: Male
- Length - Stud Center to End: 4.000
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet Corvette | Right Outer |
- Tie Rod End
- with Left Hand Threads Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES323L Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Counterclockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.625
- End 2 Gender: Male
- Length - Stud Center to End: 4.000
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet Corvette | Left Inner |
- Tie Rod End
- with Left Hand Threads Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES323L Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Counterclockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.625
- End 2 Gender: Male
- Length - Stud Center to End: 4.000
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Chevrolet Corvette | Right Outer |
- Idler Arm
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K6100 Idler Arm
- Product Attributes:
- Grease Fitting Included: Yes
- Mounting Hole Diameter:
- 2.402
- 61.0
- Pre-Greased: Yes
- Length:
- 145.0
- 5.709
- Castle Nut Included: Yes
-
Features:
- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
09-82005, 14053350, 18720, 18720D, 268-3510, 3779184, 3793578, 450-1014, 450-1014B, 45C1014, 46C1014A, 52296676, 620.62008, 803-18720, 8061004, 8720K, 982005, B3-212...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet Corvette |
- Idler Arm
- MOOG K6100 Idler Arm
- Product Attributes:
- Grease Fitting Included: Yes
- Mounting Hole Diameter:
- 2.402
- 61.0
- Pre-Greased: Yes
- Length:
- 145.0
- 5.709
- Castle Nut Included: Yes
-
Features:
- Heavy-duty design
- Loose or worn chassis parts can lead to premature tire wear
- Engineered steel composition results in a stronger component
- Powdered metal gusher bearing design enables grease to flow through bearing to
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Chevrolet Corvette |
- Power Steering Oil Cooler
- Power Steering Oil Cooler
- Pwr Strg Oil Cooler
- Product Attributes:
- Depth IN: 0.750
- Height IN: 2.500
- Outlet Size IN: 0.375
- Connector Fitting: 3/8
- Fittings Included?: Included
- Hose Length FT: 4.500
- Length IN: 9.000
- Gasket / Seals?: Not Included
- Mounting Hardware?: Included
- Description: Power Steering Oil Cooler
- Hose Size Number: 11/32
- Contains Spring?: Not Included
- Row Quantity: 2
- With Electric Fan?: Not Included
- O.E. Replacement?: No
- Bracket?: Not Included
This Part Fits the Following OEM/Substitute Numbers:
1009, 11153019, 13213, 14866, 1534157, 212, 241009, 53019, 6919, 77430, 911009, CWK911009
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1980 - Chevrolet Corvette | V | - | 8 Cyl 5.0L | 305 |
Showing 1 - 10 of 19 products
Loading...